Owner`s manual

121
Headlamps when driving abroad
The assymetrical dipped beam extends
visibility at the edge of the road at the
passenger side.
This causes glare f or onc oming traffic if the
vehicle is driven in countrie s whe re traf fic
drives on the opposite side of the road.
To avoid glare, switch both dipped beam
headlamps to symmetrical dippe d beam:
1. Ope n bonn et.
2. Remove headlamp protective cover: turn
rotating lock through 90° using a coin and
remove cover.
3. Remove headlamp protective cover. 4. Adjust lever shown in illustration:
Left-han d drive vehicles
Lef t-hand hea dlamp = Move leve r
downwards
Right- han d hea dlamp = Move leve r
upwards
Right- hand drive vehicles
Lef t-hand hea dlamp = Move leve r
upwards
Right- han d hea dlamp = Move leve r
downwards
5. Check light/dark limits of dipped beam
(e.g. in fr on t of a wa ll):
Ho r iz o nt al = Symmet r ic al
Angled upwards = Asymmetrical
6. Place headla mp protective cover in
position and close.
7. Mount headlamp protective cover and
secure with rotating lock.