Owner`s manual

169
Hold rear end of coupling ball bar below
coupling ball.
Insert front end of coupling ball bar into
co upling housin g ( 1) and swivel rear end
upwards (2) until coupling ball bar engages
audibly in coupling housing.
Lo ckin g bu tt on o n lef t-h an d side of coupling
ball bar must project visibly onc e coupling ball
bar ha s en ga ged (Fig. 74 61 V).
If the locking button is not projecting visibly,
repeat the procedure. Consu lt a Vauxhall
Dealership if necessary.
Anti-theft locking system
Open protective f la p in kn ob on right-hand
side of coupling ball ba r. Turn key in loc k.
Remove key and press protective flap into
po si tio n.
Elec tric al s ock et
On Saloon, fold socket downwards – see
Fig. 10 27 0 V.
Eye for brea k- aw ay stoppi ng c a bl e
In the case of ca ra vans/trailers with brake,
attac h breakaway stopping cable to eye.
Saloon
Eye to left of coupling housing (small arrow in
Fig. 7461 V).
Estate
Eye to righ t of coupling housing.
Dismounting the coupling ball bar
Release the anti-theft de vice: Ope n protec tive
flap. Unlock and remove key.
Turn knob on right-hand side of coupling ball
bar clockwise and simultaneously press
locking button on left-hand side. Lower rear
end of coupling ball bar and remove coupling
housing – see Fig. 7462 V.
Towing is not permitted if the locking
button is not projecting visibly.