Owner`s manual

46
In the Trip c omputer-Settings menu, select
item BC reset current values.
The value for the selected function will be
reset an d recalcu lated.
The value for Range can only be reset when
the ve hicle is station ary.
Af ter rese tt ing, th e trip comput er informa tion
may show "- - -" for the selected item. A fter a
short time, actual values will be shown again.
Resetti ng multiple infor mation on the trip
compu ter
The following trip computer information can
be reset simultaneously (values set to zero):
z Ab so lu te co nsu mp t io n
z Average consumption
z Average speed
z Distance
z Stop watch (multi-information display only)
Vehicles with multi-information display: Press
bu tt on R for at least 2 seconds.
Vehicles with gra phic al information displa y 3
or colour information display 3: In the Trip
computer-Settings menu, select item BC
reset all current values.
The values will be reset and "***" will be
displayed. New values can only be calculated
wh en the en gine is ru nning. You must drive a
short distance bef ore a verage speed c an be
ca lculated.