Owner`s manual

67
Pos ition m emory 3 for ele c tri ca lly
adjustable driver’s seat and mirrors 3
Three different seat an d mirror setups can be
stored (e.g. for three drivers).
Ready for operation:
z With driver's door open or ignition switched
on .
z For approx. 3 0 seconds af ter the driver's
door has been closed or the ignition
switched off. Operational readiness is
prolonged if system is operated within
these 30 seconds.
Storing settings:
1. Adjust seat.
2. Adjusting interior mirror, see page 8.
3. Adjusting exterior mirrors, see page 8.
4. Press memory button M an d po si ti o n but -
ton 1 simu ltan eously.
5. Set position buttons 2 and 3 in the same
way.
Retrieving settings:
Press and hold down position button 1, 2 or 3
until the stored se at and mirror positions 3
are set.
For reasons of safety, adjustment stops
immediately if the position button is rele ased
or o ne of th e se tt in g bu tt on s i s o pe ra te d.
Ov erload
If the system is electrically overloaded, the
power supply is automatically cut off for a
sh or t time.
Fault
If the e lectric drive fails, adjust seats
manually.
Adjust in longitudinal direction using crank
handle included in vehicle tools – see
pages 179, 180. Insert crank handle as shown
in illustration and turn.
The system is protected by a fuse in the fuse
box; see page 184.