Owner`s manual

7
Adjusting head restraint angle:
Tilt forwards or backwards
Adjusting head restraint height:
Unlock by tilting forward
beyond the resistance point,
hold firmly and adjust he ight,
then release
The rear head re straints do not need t o be
un loc ked to be heig ht -adjust ed.
6 Head restraint position – see page 64,
remova l, luggage compartme nt
enlargemen t – see pa ges 64, 65.
St eering wheel adjustment 3:
Pull le ver,
adjust height,
release lever
Adjust stee ring wheel only when vehicle is
stationary and steering column lock is
re le ased.
The ste erin g wheel ca n be set to five dif ferent
positions.
Set ste ering whee l to hig he st po sition to
facilitate entering and leaving the vehicle.
6 Airbag systems 3 – see page 86.
Fitting the seat belt:
Draw belt smoothly from inertia reel,
guide over the shoulder
and engage in buckle
The belt must not be twisted at any point.
The lap belt must fit snugly across the body.
The seat backrest must not be inclined too far
back.
To release belt, press red button on belt
buckle.
6 Seat belts – see pages 78 to 84,
airbag systems 3 – see page 86.