Owner`s manual

164 Vehicle care
When using the tyre repair kit during
cold temperatures, warm the kit in
a heated environment for
five minutes. This will help to inflate
the tyre faster.
If a tyre goes flat, avoid further tyre
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers.
Hazard warning flashers 3 91.
Do not remove any objects that have
penetrated the tyre.
1. Take the tyre repair kit from the
compartment.
2. Unwrap the sealant/air hose (F)
and the power plug (H).
3. Place the kit on the ground.
Make sure the tyre valve stem is
positioned close to the ground so
the hose will reach it.
4. Remove the valve stem cap from
the flat tyre by turning it
counterclockwise.
5. Attach the sealant/air hose (F)
onto the tyre valve stem. Turn it
clockwise until it is tight.
6. Plug the power plug (H) into the
accessory power outlet in the
vehicle. Unplug all items from
other accessory power outlets.
Power outlets 3 56.
Do not pinch the power plug cord
in the door or window.
7. Start the vehicle. The vehicle
must be running while using the
air compressor.
8. Turn the selector switch (A)
counterclockwise to the sealant
+ air position.
9. Press the On/Off button (B) to turn
the tyre repair kit on.
The compressor will inject sealant
and air into the tyre.
The pressure gauge (C) will
initially show a high pressure
while the compressor pushes the
sealant into the tyre. Once the
sealant is completely dispersed
into the tyre, the pressure will
quickly drop and start to rise again
as the tyre inflates with air only.