Operation Manual

Seats, interior34
Adjustment
The seat position can be ad justed by
means of switches on the outboard side of
the seat.
Adjusting the longitudinal position:
Move front switch forwards / backwards.
Height adjustment:
To adjust height of front part of seat
cushion, push front part of switch up /
down.
To adjust height of rear part of seat
cushion, push rear part of switch up / dow n.
To adjust height of entire seat cushion,
push both front and rear parts of sw itc h
up / down.
Seat backrest adjustment:
Move upp er part of rear switch forw ards /
backwards.
Operate switch until desired seat position is
reached . Seat position - see next column.
After adjusting the seat, a djust height of
seat belt - see page 43.
The seat backrest must not be tilted back
too far (recommended maximum tilting
angle ap prox. 25°).
Seat position
Adjust driver’s sea t such that, with the
driver sitting upright, the steering wheel is
held in the area of its upper spokes with the
driver’s arms slig htly bent.
Slid e front passenger’s seat as far back as
it will g o.
The seat backrests must not be tilted back
too far (recom mended maximum tilting
angle approx. 25°).
9 Warnin g
Important: Do not sit nearer tha n
10 inches (25 cm) from the stee ring
wheel, to p ermit safe airbag deployment.
Disregard ca n lead to injuries which c ould
be fatal. Vehicle passengers must be
informed accordingly.