Operation Manual

202 Service and maintenance
Service operations
by year
1)
miles (x 1000)
1)
1
20
2
40
3
60
4
80
5
100
Check exterior of body/underbody corrosion protection and note any damage in the
Service and Warranty Booklet
X X X X X
+o
Visually inspect front and rear wheel brakes
2)
, if a tyre pressure monitoring system is
fitted, do not swap wheels over
X X X X X
Engine, transmission (AT, MT), inspect air-conditioning compressor for leaks
2)
X X X X X
Visually inspect folding covers on steering, tie rods and axle drive X X X X X
Tie rod and supporting joint checking X X X X X
+
Change brake and clutch fluid Every 2 years
Undo wheel fastening (take care if tyre pressure monitoring system is present) and
tighten to torque: 110 Nm.
The wheel bolt taper should be greased or oiled lightly during assembly.
Check tyre condition. Check/correct tyre pressure (including spare wheel)
With tyre repair kit - check completeness and expiry date of kit. Replace sealant bottle
every 4 years.
X X X X X
Visually inspect first-aid kit, (presence in designated stowage compartment,
completeness and expiry date), lashing eyes, warning triangle and high visibility vest
Every 2 years
Check/correct headlight adjustment (including auxiliary headlights) X X
2)
In case of too high consumption / leakage / wear, perform additional work with customer's agreement.