Owner`s manual

Lighting 119
Automatic light control
Automatic light control function
When the automatic light control
function is switched on and the
engine is running, the system
switches between daytime running
light and headlight depending on the
lighting conditions.
Daytime running light
Daytime running light increases
visibility of the vehicle during daylight.
While the daytime running light is
active, the tail lights are switched on
or off depending on country-specific
variant.
Automatic headlight activation
During poor lighting conditions the
headlights are switched on.
Tunnel detection
When a tunnel is entered the
headlights are switched on.
Adaptive forward lighting 3 120.
High beam
To switch from low to high beam,
push lever.
To switch to low beam, push lever
again or pull.
Headlight flash
To activate the headlight flash, pull
lever.
Headlight range
adjustment
Manual headlight range
adjustment