Operation Manual

163Climate control
Picture no: 17932t.tif
Automatic mode
Basic setting for maximum comfort:
z Set fan switch to A.
z Set air distribution switch to desired
position - see next column.
z Use rotary knob to set temperature
to 22 °C (a higher or lower temperature
can be set as desired).
z Air conditioning compressor activation –
see page 164.
z All front air vents open. If desired, the
rear vents also 3.
Deactivation of the air conditioning
compressor can reduce the level of comfort
and safety – see page 164.
Picture no: 17933t.tif
Air distribution setting
L to head area via adjustable
air vents and to footwell
M to head area via adjustable
air vents
l to the windscreen and
front door windows
J to the windscreen,
front door windows,
to footwell
K to footwell
Intermediate settings are possible.
Open the air vents when the switch is
set to L or M.
Picture no: 17934t.tif
Temperature preset
Set the rotary knob to a value between
17 °C and 27 °C. Intermediate settings
are possible.
The selected temperature is maintained.
For reasons of comfort, temperature can
only be changed in small increments.
There is no temperature control for
settings below 17 °C (all the way left) or
above 27 °C (all the way right). The air
conditioning system works at maximum
cooling or heating.