Operation Manual

37Instruments
If it illuminates:
Fault in Open&Start system.
Lock or unlock vehicle using remote control
or emergency key if necessary –
see page 80, or attempt to use the spare
key.
Emergency operation – see page 81.
If
0 illuminates, this can also mean that
the steering column is still locked: move
steering wheel to and fro a little and press
Start / Stop button again.
If
0 illuminates whilst driving a system
error has occurred that may eventually
lead to a complete failure.
If
0 illuminates or flashes: the Start / Stop
button must be held depressed slightly
longer to switch off the ignition. It is
possible that the vehicle will not start
during the next start attempt.
If
0 continues to flash or remains
illuminated, consult a workshop
immediately. We recommend your
Vauxhall Authorised Repairer.
I
Engine oil pressure
The control indicator illuminates when the
ignition is switched on and goes out shortly
after the engine starts.
If it illuminates when the engine is running:
Engine lubrication may be interrupted. This
may result in damage to the engine and/or
locking of the drive wheels:
1. Depress clutch.
2. Shift manual transmission or
Easytronic 3 into neutral; for automatic
transmission 3, set selector lever to N.
3. Move out of the flow of traffic as quickly
as possible without impeding other
vehicles.
4. Switch off ignition.
Check oil level before consulting a
workshop. We recommend your Vauxhall
Authorised Repairer.
9 Warning
When the engine is off, considerably
more force is needed to brake and steer.
Do not remove key until vehicle has come
to a standstill, otherwise the steering
column lock could engage unexpectedly.