Operation Manual

44 Instruments
Picture no: 17335t.tif.
Odometer display
Time display
3
To switch between trip odometer and time
display 3 give reset knob a short press.
Setting the time
With time displayed, press reset knob in
instrument:
Picture no: 17008t.tif
Service display
InSP Service interval display.
Shows remaining distance
until next service.
Further information – see page 290.
InSP2 Bulb failure 3 – see page 268.
InSP3 Remote control has
low battery voltage 3 –
see page 69.
InSP4 Water in diesel fuel filter 3.
Consult a workshop.
On vehicles with check control 3, a
message is shown on the display
instead of InSP2 and InSP3.
ESP off Electronic Stability
Programme 3
deactivated –
see page 208.
ESP on Electronic Stability
Programme 3
activated –
see page 208.
Press for approx. 2 seconds:
Hours flash
Press briefly
Set hours
Press for approx. 2 seconds
Minutes flash
Press briefly
Set minutes
Press for approx. 2 seconds
Clock is started