Operation Manual

48 Instruments
Picture no: 17024t.tif
Triple Information Display
Setting date and time
Infotainment system off: press Ö and ;
below the display as follows:
Correcting time
3
Some RDS transmitters do not send a
correct time signal. If the incorrect time is
continually displayed, switch off automatic
time synchronisation 3 and set the time
manually - see next column.
The automatic setting is indicated by } in
the display.
Deactivating / activating automatic time
synchronisation: Infotainment system off,
press Ö and ; below the display:
Press Ö for approx. 2 seconds:
Day flashes
;:Set day
Ö:Month flashes
;:Set month
Ö:Year flashes
;:Set year
Ö:Hours flash
;: Set hours
Ö:Minutes flash
;:Set minutes
Ö:Clock is started
8:56 5,5°C
07.04.2004
Hold down Ö for approx. 2 sec., clock
display is now in setting mode.
Press Ö twice (until year flashes).
Press Ö and hold down for approx.
3 seconds until } flashes in display 3
and "RDS TIME" appears (years flash
during this time).
Press ;, display indicates:
RDS TIME 0 = Off.
Press ;, display indicates:
RDS TIME 1 = On.
Press Ö three times.