Owner`s manual

20 6
3. On som e ve hicles , the jac king points are
concealed by flap s. Fold the flap
ou t war ds .
4. Before attaching jack, set to req uired
height by hand. Fit jack arm at front –
and rear – in such a w ay that jack claw
(arrow in illustration) goes around the
vertical ridge and eng ages into the
rec ess in the ridge.
When turning the crank, ensure that the
edge of the ja ck base on the ground is
vertically in line with the contac t point.
If this is not the case during lifting, repeat
attachment procedure.
Raise vehicle by turning crank handle.
5. Unscrew wheel bolts (on wheel cover
with lock 3 remove a dapter) and put in a
safe p lace so that the threads do not g et
dirty.
6. Replac e wheel. For notes on s pare wheel
and tem porary wheel, see pa ge 200.