Owner`s manual

67
Folding d own the rear sea t bac krests
Withd raw rear outer head restraints 3 – b y
pressing spring catches, see page 64. Mov e
rea r, centre head restraint 3 to lowest
position – by pressing spring catches, see
page 64.
Hook the seat belt buckles onto the rear
seat backrests 3.
Release one or both rear seat back rests by
pressing pushbuttons a nd fold onto seat
cushion.
Raising rear seat surfac es.
Withdraw rear outer head restraints 3 – by
pressing spring catches, see page 64. Move
rear, centre head restraint 3 to lo w e s t
position – by pressing spring catches, see
page 64.
Hook the sea t belt buckles onto the rear
se at back res ts 3.
Raise one or b oth seat cushions using
straps.
Release one or both rear seat backrests by
pressing the pushbuttons a nd fold down.
To reposition rear seat backrest, pull seat
belt forw ard so tha t it does not become
trapped.
Eng age rear seat backrest audibly in
position.
The three-point seat belt for the c entre rear
seat 3 can only be pulled out of the
retractor when the rear seat backrests are
properly locked into position.
Luggag e compart ment cover
see page 68.
Sa fet y net
see page 70.
Not es on load ing
see page 71.