Owner`s manual

Keys, doors, bonnet 39
Bonnet release
To open the bonnet, pull the release lever
located on the left-hand side below the
instrument panel. The bonnet will then be
unlocked and will partially open. Return
release lever to its original position.
To open completely, locate the safety
catch, located to the right of centre - as
viewed from the front - lift upwards and
open the bonnet.
To hold bonnet in the open position, insert
the support rod, located across the
radiator grille, into the slot provided in the
underside of the bonnet.
Before closing bonnet, press the support
rod firmly into its retainers. Lower bonnet
gradually to be finally dropped by its own
weight.
Check that the bonnet is locked in position
by pulling at its front edge. If it is not locked
in position, repeat closing procedure.