Owner`s manual

Heating, ventilation78
Programming the heating mode
It is possible to store up to three
programmes which allow the heating to be
switched on.
Press P button the number of times for
selecting the desired stored programme.
Press the
_ or 6 buttons briefly. the
programming time flashes on the display.
Using the
_ or 6 buttons adjust to the
desired time, as soon as the time display
stops flashing adjust the day using the
_ or 6 buttons.
The time and day are set when the
displayed stops flashing.
Recalling a programming mode
To activate a stored programme press P
button until the corresponding number
appears on the display.
Neutral position or no stored programme
activated
Press press P button until their is no stored
programme number visible on the display.
Adjusting the temperature
To adjust the temperature of the heating
rotate the rotary knob located on the
overhead control panel.
Rotate clockwise to increase temperature.
Rotate anticlockwise to decrease
temperature.