Specifications

COMBO
Page | 69
NOTE: Subject to errors and technical amendments. The electronic version of the Conversion Guidelines is the decisive source for the up-to-date data on
Conversion Guidelines
Note (1): If there is no door open switch (if original locks are not used, see chapter 6), pin 6 for connector
C036LA can be left disconnected.
Warning: if the rear lock(s) can also be locked with the door(s) open, the instrument panel will not signal
the status of the rear door(s) and the rear courtesy light will not be operated. It will therefore be the
responsibility of the converter to notify the customer of the different operation from the description in
the Owner Handbook.
Note (2): pin 7 of connector C036LA provides a +12V power supply activated for 15 minutes after the key
is switched off (+IGNITION= off), therefore after this period has elapsed the rear courtesy light can no
longer be used until the status of the rear door open switch (where fitted) changes, or the locks are
unlocked or the key turned back on (+IGNITION= on).
- Operation with 2 button remote control: unlocking of all the locks and all courtesy lights turned on at
the same time
- Operation with 3 button remote control: separate front/rear unlocking and related courtesy lights
turned on separately.