Operation Manual

110 Instruments, controls
Triple information display
Set date and time
Infotainment system off: press Ö and ;
below the display as follows:
Correcting time
3
Some RDS transmitters do not send a
correct time signal. If the incorrect time is
continually displayed, deactivate
automatic time synchronisation 3, see next
column, and set the time manually.
The automatic setting is indicated by } in
the display.
Deactivating/activating automatic time
synchronisation: infotainment system off,
press Ö and ; below the display:
Press Ö for approx. 2 seconds:
Day flashes
;:Set day
Ö:Month flashes
;:Set month
Ö:Year flashes
;:Set year
Ö:Hours flash
;: Set hours
Ö: Minutes flash
;:Set minutes
Ö:Clock is started.
8:56 5,5°C
07.04.2004
Hold down Ö for approx. 2 sec., clock
display is now in setting mode.
Press Ö twice (until year flashes).
Press Ö and hold down for approx.
3 seconds until } flashes in display 3
and text "RDS TIME" appears
(years flash during this time).
Press ;; display shows:
RDS TIME 0 = Off
Press ;; display shows:
RDS TIME 1 = On
Press Ö three times.