Operation Manual

129Lighting
Main beam, headlight flash
To switch from dipped to main beam, press
stalk forwards.
To switch to dipped beam, push stalk
forward again or pull towards steering
wheel.
To activate the headlight flash, pull stalk
on steering wheel. Main beam is engaged
for the duration of activation.
The blue control indicator
C is illuminated
when main beam or headlight flash is on.
Automatic dipped beam
activation 3
Light switch to AUTO: Dipped beam
switches on or off automatically when the
engine is running based on outside light
conditions.
The exterior lights are turned off by
removing the ignition key.
For reasons of safety, the light switch
should always remain in the AUTO
position.
In poor visibility such as fog, turn the light
switch to 9.