Owner`s manual

104 Driving and Operation
Manoeuvring the vehicle
To manoeuvre the vehicle back and forth
during attempts to park or in garage
entrances the creeping movement can be
utilised by releasing the footbrake.
Never actuate accelerator and brake
pedals simultaneously.
In order to prevent damage, the Easytronic
disengages the "creep function" at
extremely high automatic clutch
temperatures.
Vehicle storage
Apply handbrake and remove ignition key.
The most recently engaged gear (indicated
in transmission display) remains engaged.
With N, no gear is engaged.
When the ignition is switched off, the
Easytronic no longer responds to
movement of the selector lever.
If the ignition key is not removed, the
battery may be discharged if the vehicle is
then left to stand for a lengthy period of
time.
If the handbrake has not been applied, the
control indicator R flashes in the
instrument cluster for a few seconds after
the ignition is switched off.
Fault
To prevent damage to the Easytronic, the
clutch is engaged automatically at high
clutch temperatures.
Control indicator A illuminates in the
event of a fault. Continued driving is
possible. Manual mode can no longer
be used for shifting.
If "F" also appears in the transmission
display, it is not possible to continue
driving.
Have the cause of the fault eliminated by
a workshop. The self-diagnosis integrated
into the system allows rapid fault
identification.