Owner`s manual

147Self-help, Vehicle Care
Tail lamps
1. Open the luggage compartment.
2. Disengage cover of retaining lugs and
remove.
3. Hold bulb housing from the outside and
unscrew both retaining nuts.
4. Detach bulb housing towards the rear.
5. Disengage and remove bulb holder from
bulb housing by rotating bulb holder
anticlockwise:
6. Push bulb into bulb holder slightly,
rotate anticlockwise and remove.
7. Insert new bulb.
8. Engage bulb holder into bulb housing
by rotating bulb holder clockwise.
9. Insert bulb housing in vehicle body and
tighten retaining nuts by hand.
10. Fit cover.
1 = Reversing lamp
2 = Turn signal lamp
3 = Tail lamp/brake lamp
4 = Fog tail lamp (Country-specific
version: fog tail lamp on one side
only).