Owner`s manual

76 Instruments, Controls
Triple information display
Set date and time
The Infotainment system 3 must be off.
Activate setting mode by holding
the Ö button depressed for approx.
2 seconds. The flashing value is adjusted
using the ; button. The Ö button is used
to switch to the next unit and to exit
setting mode.
Automatic time synchronisation
3
The RDS signal of most VHF transmitters
automatically sets the time. This can be
identified by } in the display.
Some transmitters do not send a correct
time signal. In such cases, we recommend
that you switch off automatic time
synchronisation.
Activate setting mode and set it to year
setting. Hold the Ö button depressed
approx. 3 seconds until } flashes in the
display and “RDS TIME" appears.
The function is activated (RDS TIME 1)
or deactivated (RDS TIME 0) with
the ; button. Exit setting mode using
the Ö button.
Graphical information display 3,
Selecting functions
The graphical information display depicts
functions and their menus.
These functions are marked or executed in
the menu display via the four-way switch,
the multifunction knob 3 on the
Infotainment System or buttons 3 on the
steering wheel.
8:56 5,5°C
07.04.2008
FM [TP] CDin
 90.6 MHz
19,5° 19:36