Owner’s Manual ASTRA Operation, Safety and Maintenance Reproduction or translation, in whole or in parts, is not permitted without prior written consent from Vauxhall Motors Ltd. All rights as understood under the copyright laws are explicitly reserved by Vauxhall Motors Ltd. All information, illustrations and specifications contained in this manual are based on the latest production information available at the time of publication. The right is reserved to make changes at any time without notice.
Contents Commitment to customer satisfaction: Our aim: to keep you happy with your vehicle. All Vauxhall Authorised Repairers offer first-class service at competitive prices. Experienced, factory-trained technicians work according to factory instructions. Your Authorised Repairer can supply you with GENUINE VAUXHALLAPPROVED PARTS, which have undergone stringent quality and precision checks, and of course useful and attractive VAUXHALL-APPROVED ACCESSORIES.
2 In brief In brief To unlock and open the vehicle: Press button q, pull door handle 6 Door locks – see page 49, keys – see page 30, electronic immobiliser – see page 31, remote control – see page 32, central locking system – see page 40, anti-theft locking system 3 – see page 41, Vauxhall alarm system 3 – see page 46, TwinTop roof operation 3 – see page 56, child safety locks – see page 49.
In brief To unlock and open the luggage compartment: Press button q on remote control, or for the Open&Start System 3: Bring electronic key into the reception area of the vehicle, pull button below handle 6 Open&Start-System 3 – see page 34, remote control – see page 32, central locking system – see page 40, Vauxhall alarm system 3 – see page 46. To adjust front seat: Pull handle, slide seat, release handle Adjust front seat backrests: Turn handwheel 6 Seat – see page 64, seat position – see page 67.
4 In brief To adjust front seat height 3: Operate lever on outboard side of seat Pump action on lever Up: Seat higher Down: Seat lower 6 Seat – see page 64, seat position – see page 67. To adjust front seat inclination 3: Pull inner lever on front of seat, adjust inclination, release lever, engage seat in position Adjust the inclination by distributing body weight. 6 Seat – see page 64, seat position – see page 67.
In brief To adjust head restraint height of front and rear outboard seats: Press button to release, adjust height, engage in position To fit seat belt: Draw seat belt smoothly from inertia reel, guide over shoulder and engage in buckle 6 Head restraints – see page 68, head restraint position – see page 69, adjust rear centre head restraint – see page 68, head restraint removal – see page 69. The entire length of the seat belt must be twist-free. The lap belt must lie closely against the body.
6 In brief To adjust exterior mirrors manually: From inside, swivel lever in required direction 6 Mirrors – see page 49, aspherically curved exterior mirror – see page 49, folding exterior mirror – see page 50, heated exterior mirror – see page 157. Electrical exterior mirrors 3 adjust: Four-way switch in driver’s door Press right or left mirror switch: four-way switch controls the appropriate mirror. Centre position: no adjustment.
In brief Steering column lock and ignition on vehicles with Open&Start system 3: Make sure electronic key is in the interior reception range and press the Start/Stop button; disengage the steering column lock by moving the steering wheel slightly To start the vehicle, also operate brake or clutch pedal. To activate the steering column lock, switch ignition off by pressing the Start/ Stop button, open driver’s door and engage steering wheel. Do not allow vehicle to move while doing this.
8 In brief
In brief 1 Page Side air vents .................................. 156 2 Front passenger airbag .................. 93 3 Centre air vents ............................. 156 4 Central information display for time, date, outside temperature, Infotainment system 3, Check control 3 .............................. 138 Trip computer 3 .....................128, 134 Climate control system 3 ............. 168 5 6 Heated seat (left) 3 ...................... 157 Deflation detection system 3 .......
10 In brief Control indicators Open&Start system, fault, 0 A Engine electronics, gearbox electronics 3, immobiliser, diesel fuel filter 3, fault, see pages 31, 115, 182, 188, 196, 206. j Easytronic 3, start engine 3, see pages 115, 177. IDS+ Continuous Damping Control 3, SPORT mode 3, see pages 212, 213. S Engine oil level 3, see pages 116, 298. 8 Exterior lights, see pages 116, 143. see pages 34, 112. I Engine oil pressure, see page 113.
In brief Headlight flash, main beam and dipped beam: Headlight = Pull stalk flash toward steering wheel Main beam = Push stalk forward Dipped beam = Push stalk forward again or pull toward steering wheel 6 Main beam, headlight flash – see page 144. 11 Switch on turn signal lights: Right = Move stalk up Left = Move stalk down Hazard warning lights: On = Press ¨ Off = Press ¨ again 6 Turn signal lights – see page 144. 6 Hazard warning lights – see page 146.
12 In brief Activate horn: Press j in centre of steering wheel 6 Airbag system – see page 93, remote control on steering wheel 3 – see page 151. Windscreen wiper: Move stalk up slightly § = Off $ = Timed interval wipe % = Slow & = Fast Automatic wiping with rain sensor 3: Move stalk up slightly $ = Automatic wiping with rain sensor § = Off Move stalk down from position §: Single swipe. 6 Windscreen wiper – see page 141, wiper blades – see pages 303, 304, vehicle care – see page 291.
In brief Operating windscreen and headlight wash systems 3: Pull stalk toward steering wheel 6 Windscreen and headlight wash systems – see page 142, further notes – see pages 291,303 Activate rear screen wiper 3 and wash system 3: Wiper on = Push stalk forward Wiper off = Push stalk forward again Wash = Hold stalk pushed fully forward 6 Rear screen wiper and wash system – see page 142, further notes – see pages 291, 303.
14 In brief To demist or defrost windows: Set air distribution to l, rotary switch for temperature and air flow clockwise; Air conditioning system 3: also press button n; Automatic air conditioning system 3: press buttons n and V, turn rotary switch for temperature clockwise, air flow to A; Climate control system 3: press button V 6 Climate control system 3 – see page 154.
In brief 15 To exit P, switch ignition on, operate footbrake and press button on selector lever. Press button on selector lever to engage P or R. P Only when vehicle is stationary, first apply handbrake R Only when vehicle is stationary 6 Automatic transmission 3 – see page 184.
16 In brief To move from P or N, switch on ignition, depress footbrake and press button on selector lever. Before starting off, check: To select P or R, press button on selector lever. P Only when vehicle is stationary, first apply handbrake R Only when vehicle is stationary z Engine oil level and fluid levels in engine compartment – see pages 298 to 305. 6 Automatic transmission with ActiveSelect 3 – see page 190.
In brief 17 Press button again to repeat the starting procedure or switch off the engine. To turn on the ignition, do not press the brake or clutch pedal; just press the button briefly. Do not start unless vehicle is stationary. 6 Open&Start-System 3 – see page 34, electronic immobiliser – see page 31, diesel fuel system – see page 242.
18 In brief Parking the vehicle z Always apply handbrake without pressing release button. Apply as firmly as possible on a downhill slop or uphill slope. Operate footbrake at same time to reduce operating force. z Switch engine off by turning ignition key to 0. Remove ignition key and turn steering wheel until steering lock is felt to engage (anti-theft protection). With Open&Start system 3 switch ignition off and open driver’s door.
In brief Advice when parking: z Do not park the vehicle on an easy flammable surface. The high temperature of the exhaust system could ignite the surface. z On vehicles with Easytronic 3 control indicator R flashes for a few seconds after the ignition is switched off if the handbrake has not been applied – see page 182. z Close the windows and sunroof 3 or TwinTop 3. z The engine cooling fans may run after the engine has been switched off – see page 297.
20 In brief Vauxhall Full Size airbag system The Vauxhall Full Size airbag system consists of several separate systems. Front airbag system The front airbag system will be triggered in the event of a serious accident involving a frontal impact and forms safety cushions for the driver and front passenger. The forward movement of the driver and front passenger is checked and the risk of injuries to the upper body and head thereby substantially reduced.
In brief Active headrests 3 on front seats In the event of a rear-end impact, the active head restraints tilt forward a little. The head is more effectively supported by the head restraint and the danger of whiplash in the neck area is reduced. Active head restraints are identified by the lettering ACTIVE on the head restraint guide sleeves. 6 Headrests – see page 68. 21 Operating menus in the information display 3 Selection using multi-function button 3: rotate and press multi-function button.
22 In brief 2 Board Computer BC 1 BC 2 Timer 1 257.0 Ø 40 8 7.0 Ø 31.0 Tyres Selection with left adjuster wheel on steering wheel 3: rotate adjuster wheel and press. 6 Information Display – see page 122. 19,5° 19:36 All values miles Coolant level mph check gal mpg OK Trip computer 3 Check control 3 The trip computers provide information on driving data, which is continually recorded and evaluated electronically.
In brief 23 Two headphone connections are available, with separate volume controls. Further information is available in the infotainment system operating instructions. 6 Twin Audio 3 – see page 152. Remote control on steering wheel 3 The functions of the infotainment system 3 and the information display can be operated with the buttons and adjuster wheels on the steering wheel. Further information is available in the infotainment system operating instructions.
24 In brief Damping and steering become more direct and provide better contact with the road surface. The engine reacts more quickly to accelerator movements. With Easytronic 3 and automatic transmission 3, the shift times are shortened and shifting takes place at higher revs (not with cruise control enabled 3). 6 Sport mode 3 – see page 212.
In brief 25 2 Board Computer BC 1 BC 2 Timer Tyres Deflation Detection System (DDS) 3 The deflation detection system continuously monitors the speed of all wheels while driving. If a tyre loses pressure, it grows smaller and therefore rotates more quickly than the other wheels. If the system detects a difference in speed, the control indicator w illuminates in red. After tyre pressure is corrected or a tyre or wheel is changed, the system must be initialised by pressing the DDS button.
26 In brief Adaptive Forward Lighting (AFL) 3 improves lighting in curves (curve lighting) on vehicles with Bi-Xenon headlight system. Curve lighting The Xenon light beam pivots based on steering wheel position and speed (from approx. 6 mph/10 km/h). Motorway lighting At higher speeds and continuous straight ahead travel, the dipped beam automatically raises slightly, thereby increasing headlight range. 6 Adaptive driving lights 3 – see page 147.
In brief Parking distance sensor 3 Cargo box 3 FlexOrganizer 3 When reverse gear is selected, the parking distance sensor switches itself on automatically. Collapsible box to divide the luggage compartment. The side walls contain retaining strips, where various components can be attached to divide the luggage compartment or fasten loads. The parking distance sensor can also be activated at speeds of less than 15 mph (25 km/h) by pressing the r button on the instrument panel.
28 In brief The roof is operated with the buttons on the roof console above the mirror or with the remote control. To improve luggage compartment accessibility, the electric loading aid makes it possible to raise the open roof when it is stowed in the luggage compartment. 6 TwinTop – see page 56. Luggage compartment cover, Estate To open: Press handle on luggage compartment cover down. The cover automatically unrolls. 6 Luggage compartment cover 3 – see page 76.
In brief Diesel particle filter 3 The diesel particle filter system removes polluting soot particles out of the engine exhaust gases. The system includes a self-cleaning function that operates automatically while driving. The filter is cleaned by burning the trapped soot particles at a high temperature. There may be an increase in fuel consumption, exhaust smell, and engine cooling fan operation 3 during the self-cleaning operation.
30 Keys, doors, windows, TwinTop Keys, doors, windows, TwinTop Replacement keys ............................... Car Pass................................................ outboardKey with foldaway key section 3 ............................................ Electronic immobiliser.......................... Store personal vehicle settings in the vehicle key 3 ............................... Remote control 3 with mechanical key ...................................................... Open&Start system 3 .........
Keys, doors, windows, TwinTop Electronic immobiliser The system checks whether the vehicle may be started with the mechanical key or electronic key of the Open&Start system 3 that is being used. If the key is recognised as "authorised" the vehicle can be started. The check takes place via a transponder in the key.
32 Keys, doors, windows, TwinTop Store personal vehicle settings in the vehicle key 3 The last settings selected z instrument illumination, z information display 3, z Infotainment system 3, z for the climate control system 3 are stored automatically depending on the vehicle key used. Different settings stored for each vehicle key are retrieved automatically on use of the vehicle key concerned. Each time the vehicle is locked, the settings are saved again.
Keys, doors, windows, TwinTop 33 The remote control has a range of approx. 5 metres. This range can be affected by outside influences. Aim the remote control at the vehicle to operate. Fault If the central locking system cannot be operated with the remote control, it may be due to the following: z If the central locking system is overloaded as a result of repeated operation at short intervals. The power supply is cut off for a brief period.
34 Keys, doors, windows, TwinTop Key with fixed key section Have the battery changed by a workshop. Remote control synchronisation After replacing the battery, unlock door with key in lock, see page 43. The remote control is synchronised by switching the ignition on. Remote control battery replacement Replace the battery as soon as the range of the remote control begins to shrink. Key with foldaway key section Fold out key bit, see page 30. Open remote control.
Keys, doors, windows, TwinTop 35 If the brake or clutch pedal is depressed, the engine can be started right away with a single press on the Start/Stop button. Releasing the Start/Stop button interrupts the starting procedure. The engine and the ignition are switched off by pressing the Start/Stop button again. The vehicle must be stationary. The immobiliser is activated at the same time.
36 Keys, doors, windows, TwinTop The remote control has a range of approx. 5 metres. This range can be affected by outside influences. Aim the remote control at the vehicle to operate. Handle the remote control with care, protect it from moisture and high temperatures and avoid unnecessary operation. The hazard warning lights come on to indicate that the remote control is operational. Central locking system, see page 40.
Keys, doors, windows, TwinTop 37 InSP3 in the service display or an appropriate message in the information 3 display indicates that the battery of the electronic key needs replacing, see page 39. If the control indicator 0 illuminates continuously, an error has occurred in the system. Lock or unlock vehicle using the remote control or the emergency key if necessary, see page 43, or try using the spare key.
38 Keys, doors, windows, TwinTop Only the driver’s door can be locked and unlocked using the emergency key. Unlock the entire vehicle as described on page 43. In the version with Vauxhall alarm system 3 the alarm may be triggered when the vehicle is unlocked. Switch ignition on to deactivate alarm and release the steering column lock: hold electronic key at marked position on the steering column panelling and press the Start/Stop button. Repeat procedure if necessary.
Keys, doors, windows, TwinTop 39 z Remote control battery voltage too low – refer to text in previous columns for instructions on how to change battery. z Frequent, repeated operation of the remote control outside the reception range (e.g. too far from vehicle, remote control is then no longer recognised). z If the central locking system is overloaded as a result of repeated operation at short intervals. The power supply is cut off for a brief period.
40 Keys, doors, windows, TwinTop Central locking system For doors, boot lid/tailgate and tank flap. To unlock Remote control with mechanical key Press button q on remote control. To open the door, pull the handle. Open the luggage compartment by pulling the knob under the tailgate handle. If the door or the luggage compartment is open, Q illuminates in the instrument panel. Open&Start system with electronic key 3 The electronic key must be within the outside reception range of the vehicle.
Keys, doors, windows, TwinTop 41 Mechanical anti-theft locking system 3, 9 Warning Do not use the system if there are people in the vehicle! The doors cannot be unlocked from inside. Open&Start system with electronic key 3 The electronic key must be within the outside reception range of the vehicle. There must be no electronic keys inside the vehicle. Touching the sensor in the door handle of the driver’s or front passenger’s door locks all doors and the luggage compartment.
42 Keys, doors, windows, TwinTop Note z The central locking system will not lock if the driver’s door is not properly closed. Q illuminates in the instrument panel as an indication. z If the front passenger door, the rear doors 3 or the luggage compartment is not correctly closed, the LED in the central locking button m flashes for 10 seconds when the central locking system is operated, and Q illuminates in the instrument panel at the same time.
Keys, doors, windows, TwinTop z With the Open&Start system 3 the vehicle cannot be unlocked until 2 seconds after locking. Within this time, a door handle can be pulled or the button beneath the tailgate handle operated to check whether the vehicle is locked. For Astra TwinTop with open roof - after opening the driver’s door, press the central locking button m in the centre console. The vehicle will then be unlocked, provided the anti-theft locking system 3 is not engaged.
44 Keys, doors, windows, TwinTop Luggage compartment To unlock Remote control with mechanical key Press button q on the remote control. The luggage compartment is unlocked together with the doors. To lock Insert the key or emergency key for Open&Start system 3 (see page 37) into the opening above the lock on the inside of the door and press until the lock audibly engages. Then close the door. The procedure must be repeated for each door. The driver’s door can also be locked from outside using the lock.
Keys, doors, windows, TwinTop To close: Close luggage compartment using the handle on the inside of the tailgate. To lock Close doors, luggage compartment and tank flap. Do not operate the button beneath the handle when closing. Otherwise the luggage compartment will once again be unlocked. Remote control with mechanical key Press button p on remote control. Open&Start system with electronic key 3 Press button p of the electronic key remote control or touch sensor in handle of one of the front doors.
46 Keys, doors, windows, TwinTop Vauxhall alarm system 3 monitors z the doors, luggage compartment, bonnet, z the passenger compartment, z vehicle tilt, e.g. if it is raised, z the ignition. 9 Warning Do not use the system if there are people in the vehicle! The doors cannot be unlocked from the inside. To activate Remote control with mechanical key All doors, windows, the sun roof 3 and the bonnet must be closed. Within 15 seconds of locking, press button p on the remote control again.
Keys, doors, windows, TwinTop 47 4. Switch on Vauxhall alarm system. LED illuminates. After approx. 10 seconds the system is activated, without monitoring of the passenger compartment or vehicle tilt. LED flashes until system is switched off. For Astra TwinTop, passenger compartment monitoring is deactivated if the roof is open to prevent false alarms. Activation without monitoring of passenger compartment and vehicle tilt To activate e.g. if animals are left in the vehicle. 1. Close tailgate and bonnet.
48 Keys, doors, windows, TwinTop In the event of a fault in the remote control or the Open&Start system, open the vehicle as described on page 43. If the alarm is triggered when the driver’s door is opened, deactivate the Vauxhall alarm system by switching on the ignition. Note Changes to the vehicle interior, such as the use of seat covers, could impair the function of passenger compartment monitoring.
Keys, doors, windows, TwinTop Child safety locks 3 9 Warning Use the child safety lock whenever children are occupying the rear seats. Disregard may lead to injuries or endanger life. Vehicle passengers should be informed accordingly. Using key or screwdriver, turn knob on rear door lock from the vertical position: door cannot be opened from inside. Exterior mirrors Manual adjustment with levers in the front doors or electric 3 switch in driver’s door console.
50 Keys, doors, windows, TwinTop If an electrical retracted mirror is extended manually, pressing button n will cause the mirror to move all the way forward. The other mirror will be eclectically swiveled to the driving position. If button n is pressed again, both mirrors will be electrically retracted. Press again: both mirrors swivel to the driving position. Fold mirrors back into driving position before moving away.
Keys, doors, windows, TwinTop 51 Electric windows 3 9 Warning Take care when operating the electric windows 3 and the sun roof 3. Risk of injury, particularly to children. Vehicle passengers should be informed accordingly. If there are children on the rear seat, switch on the child safety system 3 for the electric windows. Interior mirror To adjust, swivel mirror housing. Automatic anti-dazzle interior mirror 3 Dazzling is automatically reduced at night.
52 Keys, doors, windows, TwinTop Operated via two or four 3 switches in the driver’s door handle. The front switches are for the driver and front passenger doors. The rear switches 3 are for the rear doors. Additional switches are located in the front passenger door and rear doors 3. For incremental operation, briefly pull or press the switch. For automatic opening or closing, pull or press the switch longer. Pull or press the switch again to stop the movement.
Keys, doors, windows, TwinTop Central switch for electric windows, Astra TwinTop Button $ or " in the roof console. Press button $: all windows are closed. Press button ": all windows are opened. Panoramic windscreen 3 Open the roof lining Turn the handle to the right and move the roof lining rearward to a suitable position. 53 Close the roof lining Move the roof lining forward to a suitable position. When moved all the way forward, the roof lining engages in position.
54 Keys, doors, windows, TwinTop To raise: When the roof is closed, press button ü. The roof is tilted in the rear. To open: Press button ü again from the tilted position. The roof opens to its stop. To close: Press button d. For reasons of safety, the roof closes from its open position to approx. 20 cm. Hold button d depressed to close completely. Sunroof 3 Operated via rocker switches in the roof console when the ignition is switched on. For incremental operation, briefly press the button.
Keys, doors, windows, TwinTop 55 Note z If the top of the roof is wet, raise roof, allow water to run off and then open roof. Overload If the system is overloaded, the power supply is automatically cut off for a short time. Fault If the sun roof and sunblind do not operate properly, activate electronics as follows: z When using a roof rack, check the clearance of the sun roof to avoid damage. The system is protected by fuses in the fuse box, see page 262. 2.
56 Keys, doors, windows, TwinTop TwinTop With TwinTop, a convertible hardtop, Astra unites the benefits of a coupe with those of a convertible. 9 Warning Take care when operating the convertible hardtop. Risk of injury. Monitor the action zone above, to the side and to the rear of the vehicle during roof operation. Make sure that nothing could become pinched. Make sure no one is in the action zone of the roof or boot lid during roof operation. Risk of injury.
Keys, doors, windows, TwinTop With the vehicle stopped, the roof can be opened using the remote control 3. Unlock the vehicle. Press button q again and keep pressed until the roof has opened fully and the boot lid has closed. During operation with the remote control, the door windows are opened completely. To close the roof There must be no objects in the pivot area of the roof and boot lid. Hold button < in the roof console depressed until the roof and boot lid are completely closed.
58 Keys, doors, windows, TwinTop Indicator and warning buzzers z Indicator buzzer upon completed opening or closing of the convertible hardtop. z Indicator buzzer upon completed raising or lowering of the electric luggage compartment loading aid. z Gong tone if the boot lid is not closed during roof operation. z Gong tone if the boot lid is not fully opening during operation of the luggage compartment loading aid. z Gong tone during roof operation if vehicle speed exceeds 20 mph (30 km/h).
Keys, doors, windows, TwinTop z The roof can be held in an intermediate position for 9 minutes to facilitate cleaning of roof spaces. This is done by disengaging the actuation switch. One minute before the end of this period, a continuous buzzer sounds as a warning that the hold period is almost over and the roof could start to move. Fault The automatic drive of the roof is only operational if the roof is in the proper open or closed position.
60 Keys, doors, windows, TwinTop Fixed anti-roll bars are secured to the vehicle bodywork. Deployable anti-roll bars 3 are located between the rear head restraints and the boot lid in such a way that they are out of sight. In the event of a rollover, head-on collision or side impact, the anti-roll bars deploy upwards within milliseconds. The convertible roof must not be operated if the anti-roll bars have been deployed. A continuous warning will sound if the switch is actuated.
Keys, doors, windows, TwinTop Blockage of boot lid on closure 3 To avoid damage to the open roof, boot lid or load, the boot lid can only be closed if the electric load aid is in the lower end position, see page 82. 61 Wind deflector 3 With the wind deflector installed turbulence, draughts and noise in the passenger compartment are reduced when the roof is open. The rear seats cannot be occupied when the wind deflector is in place. Do not place any objects on the wind deflector.
62 Keys, doors, windows, TwinTop With tyre repair set 3, the wind deflector is folded down into a storage compartment 3 in the luggage compartment below the loading floor cover. For the version with spare wheel 3, the wind deflector is folded away in the luggage compartment Fitting Take the wind deflector from the luggage compartment. Expand the collapsed wind deflector as illustrated.
Keys, doors, windows, TwinTop Insert the guide clips of the wind deflector in the seat belt recesses between the rear head restraints. Pull the toggle of the right and left locking pin and turn to lock. Straighten out the wind deflector, turn the toggle back and engage the locking pin in the recess in the side trim. 63 The wind deflector can be folded back when not in use.
64 Seats, interior Seats, interior Front seats ........................................... Head restraints .................................... Armrest 3 at driver’s seat ................... Armrest 3 in back seat backrest........ Extending the luggage compartment, Hatch ................................................. Extending the luggage compartment, Estate ................................................. Extending the luggage compartment, Astra TwinTop ...................................
Seats, interior Adjusting the backrest To adjust, turn side handwheel on the seat while releasing the load on the backrest. Adjusting the seat height 3 To adjust, operate lever on the outside of the seat. Move backrest to suit seating position. Pump action on lever Up: Seat higher Down: Seat lower 65 Adjusting the seat angle 3 To adjust, pull the lever on the front of the seat, adjust the angle and release the lever. The seat should engage perceptibly.
66 Seats, interior The seat back can only be tipped forwards from an upright position. When the backrest is folded forward, do not activate the handwheel for backrest adjustment. In vehicles with a panoramic window 3: to tilt seats forward, push head restraints down and lift up sun visors. Adjusting the lumbar support 3 To adjust, turn side handwheel on backrest while relieving the load on the backrest. Adjust lumbar support to suit personal requirements.
Seats, interior 67 The seat backrests must not be tilted too far back (recommended maximum tilting angle approx. 25°). 9 Warning Failure to observe the descriptions could lead to injuries which could be fatal. Vehicle passengers should be informed accordingly before starting off. Adjusting the thigh support 3 on the sports seats 3 To adjust, press the button on the front of the adjustment padding and slide the thigh support.
68 Seats, interior Head restraints Adjusting the front head restraints and rear outboard head restraints 3 To adjust, press button on side and adjust height. Adjusting the rear, centre head restraint 3 To adjust, pull the head restraint up or press the catch to release. Then push the head restraint down. Adjusting the rear head restraints 3, Astra TwinTop To adjust, pull the head restraint up or press the two catches to release. Then push the head restraint down.
Seats, interior 69 Head restraint position The middle of the head restraint should be at eye level. If this is not possible for extremely tall persons, set to highest position, and set to lowest position for small persons. Active head restraints 3 In the event of a rear-end impact, the active head restraints tilt forwards slightly. The head is more effectively supported by the head restraint and the danger of whiplash in the neck area is reduced.
70 Seats, interior Armrest 3 at driver’s seat Armrest 3 in back seat backrest Push raised armrest backward against resistance and fold down. Fold down the armrest, pulling the strap obliquely down (45°). The armrest can be moved to different positions in stages by lifting it. When the centre rear seat is in use or the rear backrests are folded, fold the armrest up. If the armrest is not required it can be raised. Stowage compartment in armrest – see page 110.
Seats, interior Extending the luggage compartment, Hatch Folding the rear seat backrests Pushing rear head restraints all the way down or removing, see pages 68, 69. Slide front seat forward slightly. Disengage the backrest (single or split 3) using the pushbutton and fold it down onto the seat cushion. Return front seat to desired position. 71 Fold down centre backrest 3 Push head restraint all the way down – see page 68.
72 Seats, interior Extending the luggage compartment, Estate Folding the rear seat backrests onto the seat cushion Push the rear head restraints all the way down or remove, see pages 68, 69. To detach hooks of luggage compartment cover from head restraints, see page 77. Slide front seat forward slightly. Disengage the backrest (single or split 3) using the pushbutton and fold it down onto the seat cushion. Return front seat to desired position.
Seats, interior 73 Folding the centre seat backrest makes it possible to load longer objects. The outer seats can still be used for occupants. 9 Warning The load must not obstruct the operation of the pedals, handbrake or transmission or restrict the driver’s freedom of movement. Do not place loose objects in the interior. Pay attention to notes on page 84. Disengage backrest (one-piece or split 3) using pushbuttons, fold forward and engage.
74 Seats, interior The three-point seat belt for the centre rear seat can only be pulled from its inertia reel if the backrest is properly engaged. Safety net 3 See page 78. Notes on loading See page 84. Restoring the backrests or seat cushions 3 to their original position Guide the seat belt through the side bracket to protect against damage. Raised seat cushions: Insert and adjust head restraints in backrests – see pages 68, 69.
Seats, interior 75 Extending the luggage compartment, Astra TwinTop Cover behind armrest can be locked from luggage compartment 3: turn button 90°: Folding down the front passenger seat 3 Loading area between rear seats Pull out the armrest by the strap. Locked Unlocked To push down and remove front passenger seat head restraint, see pages 68, 69. The armrest is held in place on the backrest with a retaining strap. To fully remove the armrest, disengage the bracket at the retaining strap.
76 Seats, interior To close Press handle on luggage compartment cover rearwards; the cover automatically engages in its end position. Do not place any heavy or sharp-edged objects on the cover. Luggage compartment cover Hatch Removing Unhook retaining straps from tailgate. Pull cover from the side guides. Fitting Engage cover in side guides and fold downwards. Attach retaining straps to tailgate. Estate To open Press handle on luggage compartment cover down. The cover automatically unrolls.
Seats, interior 77 Fitting Insert luggage compartment cover into recess on left, raise release lever on right side, insert cover into recess on right, engage and push lever down. Attach the hooks on the head restraints see Fig. 17079 T. To cover the gap between the luggage compartment cover and the rear backrests, there is a cover on the cartridge. Attach the two hooks of the cover to the head restraint guide rods. If the safety net is mounted, run the hooks through the net mesh.
78 Seats, interior Safety net 3, Estate The safety net can be mounted behind the rear seats or, if the rear seat backrests are folded and the seat cushions raised, behind the front seats. Passengers must not be carried behind the safety net. Fitting behind the rear seats Remove luggage compartment cover, see page 76 Unroll the safety net. There are two brackets in the roof frame. Hook the net rods into the brackets on one side and then the other. Slide forward to engage.
Seats, interior Removing Detach the safety net belt straps by tipping up the length adjuster. Unhook the safety net rods from the brackets in the roof frame. Roll up the net and secure with a strap. Luggage compartment grille 3, pick-up To transport long objects, part of the luggage compartment grille behind the passenger seat can be opened: Release passenger seat back and fold forward. Press bracket down and fold grille section up. 79 Lock grille in open position.
80 Seats, interior Lashing eyes 3 in the luggage compartment are used to secure lashing straps 3 or a luggage net 3 to prevent objects that are being transported from sliding. Rails and hooks in the luggage compartment 3, Estate The side walls of the luggage compartment house two rails. Insert the hooks in the desired position in the rails: insert the hook in the upper groove on the rail and press in the lower groove. Pull off the hook to remove.
Seats, interior Variable partition net Insert an adapter in each rail: Fold up handle plate, insert adapter in upper and lower groove of rails, move to desired position. To lock the adapter, swivel the handle plate up. Compress the rods of the partition net slightly and insert in corresponding openings of the adapter. The longer rod must be inserted in the upper adapter.
82 Seats, interior Luggage compartment blind, Astra TwinTop To open: Release luggage compartment blind from recesses on left and right, blind rolls up automatically. To close: Grasp the handle, pull the blind towards the rear of the vehicle and engage in the recess on the right and left. Do not place any objects on the luggage compartment blind. There must be no objects outside of or on top of the luggage compartment blind when the roof is open or in the process of opening.
Seats, interior 9 Warning Take care when operating the loading aid. Risk of injury. Make sure that nothing could be pinched. Make sure no one is in the action zone during operation. Risk of injury. This is especially important for children. Inform passengers accordingly. z Load luggage compartment at most to marked load height, otherwise the roof and load could be damaged. z Suspend the luggage compartment blind from the rear window frame, and engage in recesses on right and left.
84 Seats, interior z Estate: mount the safety net 3 when transporting objects in the luggage compartment – see page 78. z Estate: close luggage compartment cover – see page 76. z If the backrests are not folded down when transporting objects in the luggage compartment, they must be engaged in their upright position 3 – see pages 71, 74.
Seats, interior Three-stage safety system Comprising: z Three-point seat belts z Belt tensioners at the front seats z Airbag systems for driver, front seat passenger and rear outboard seats 3. On Astra TwinTop 3, roll-over bar behind rear seats. The three stages are activated in sequence depending on the severity of the accident: z The automatic seat belt locking devices prevent the belt strap from being pulled out and thus ensure that the vehicle occupants are retained in their seats.
86 Seats, interior 9 Warning Always wear your seat belt, and that means also in urban traffic and when you are a rear seat passenger. It can save your life! Pregnant women must always wear a seat belt, see page 88. In the event of an accident, persons not wearing seat belts endanger their fellow occupants and themselves. Control indicator X 3 for the seat belt – see page 114. Seat belts are only intended for one person. They are not suitable for anyone under 12 years of age or under 150 cm tall.
Seats, interior 9 Warning Have the cause of the fault eliminated immediately by a workshop. The system’s integrated self-diagnostics allows faults to be quickly remedied. Control indicator v for belt tensioners The function of the belt tensioners is monitored electronically together with the airbag systems and the deployable anti-roll bars 3. Their operational readiness is indicated by control indicator v in the instrument panel.
88 Seats, interior Operating the seat belts Fitting seat belts Pull seat belt out of retractor and guide across the body, making certain that it is not twisted. Insert the latch plate into the buckle. The front seat backrest must not be tilted back too far or the seat belt will not operate properly. The recommended angle of inclination is 25°. Make sure that the lap belt is not twisted and that it fits snugly across the body.
Seats, interior 89 Three-point seat belts on rear outer seats When not in use, pass seat belts through side holders 3 as shown in Fig. 17063 T on page 71. Three-point seat belt of centre rear seat 3 The seat belt can only be pulled from the inertia reel when the backrests are upright and properly engaged – see page 71. Adjust height such that seat belt passes over wearer’s shoulder and rests against the shoulder. It must not pass over the neck or upper arm.
90 Seats, interior Child restraint system 3 When a child restraint system is used, follow the instructions for use and installation. The country in which you are travelling may not permit the use of child restraint systems on certain seats. Always comply with the local or national regulations. Selecting the right system Your child should travel facing backwards in the car for as long as possible.
Seats, interior B1 = Limited, only with seat occupancy recognition and Vauxhall child restraint system with transponders. If the child restraint system is being secured using a three-point seat belt, move seat height adjustment 3 to uppermost position. Move front passenger seat as far back as possible and move front passenger seat belt anchorage point to lowest position. B2 = Limited, only with seat occupancy recognition and Vauxhall child restraint system with transponders.
92 Seats, interior Vauxhall Full Size airbag system The Vauxhall Full Size airbag system consists of several separate systems. Front airbag system The front airbag system will be triggered in the event of a serious accident involving a frontal impact and forms safety cushions for the driver and front passenger. The forward movement of the driver and front passenger is checked and the risk of injuries to the upper body and head thereby substantially reduced.
Seats, interior 93 Exception: Passenger seat with seat occupancy recognition system 3. The seat occupancy recognition system deactivates the front and side airbags on the passenger side 3 if the front passenger seat is unoccupied or a Vauxhall child restraint system with transponders 3 has been fitted to the front passenger seat. Seat occupancy recognition, see page 99. Vauxhall child restraint system with transponders 3, see page 90.
94 Seats, interior When triggered, the front airbags inflate in milliseconds to form a safety cushion for the driver and front passenger. The forward movement of the front seat occupants is checked, thereby substantially reducing the risk of injury to the upper body and head. No impairment of view will occur, because the airbags inflate and deflate so quickly that it is often not even noticed in an accident.
Seats, interior 95 9 Warning Seat belts must therefore always be worn. The front airbag system serves to supplement the three-point seat belts. If you do not wear your seat belt you risk being seriously injured, or even thrown from the vehicle, in the event of an accident. In the event of an accident the seat belt helps to keep you seated in the correct position, so that the front airbag system can provide you with effective protection.
96 Seats, interior 9 Warning There must be no objects in the area in which the airbag inflates or in the area between the seat backs and the vehicle body. Do not place the hands or arms on the covers of the airbag systems. Important information, see page 101. The three-point seat belt must always be correctly fitted, see page 88. When triggered, the side airbag inflates within milliseconds to form a safety cushion for the driver or front passenger in the respective door area.
Seats, interior Curtain airbag 3 The curtain airbag system is identified by the word AIRBAG on the roof pillar trim.
98 Seats, interior 9 Warning 9 Warning There must be no objects in the area in which the airbag inflates. Do not place the hands or arms on the covers of the airbag systems. Important information, see page 101. Have the cause of the fault eliminated immediately by a workshop. The system’s integrated self-diagnostics allows faults to be quickly remedied. The three-point seat belt must always be correctly fitted, see page 88.
Seats, interior Seat occupancy recognition 3 The seat occupancy recognition system deactivates the front and side airbags 3 for the front passenger if the front passenger seat is not occupied or a Vauxhall child restraint system with transponders 3 is fitted on the front passenger seat. The curtain airbag system 3 remains activated. The control indicator y for seat occupancy recognition is located in the instrument panel. If the control indicator y illuminates for approx.
100 Seats, interior Control indicator y for Vauxhall child restraint systems with transponders 3 The presence of a Vauxhall child restraint system with transponders 3 is indicated after the ignition has been switched on by continuous illumination of the control indicator y in the instrument panel, as soon as the seat occupancy recognition system has detected the child restraint system.
Seats, interior Important z Do not affix or place accessories or other objects within the expansion range of airbag systems or extending anti-roll bars 3 is not permitted, since this could result in injuries if the components are actuated. z Do not place any objects between the airbag systems/anti-roll bar covers 3 and the occupants. Risk of injury. 9 Warning Never carry child restraint systems or other objects on your lap – risk of fatal injury.
102 Seats, interior z When disposing of the vehicle, the safety instructions given for this must be observed. Take the vehicle to a recycling company for disposal. z Persons weighing less than 35 kg should only travel on the rear seats. This does not apply to children who are travelling in child restraint systems with transponders 3.
Seats, interior 103 Vehicles with seat occupancy recognition are identified by a sticker on the lower panel of the front passenger seat, see Fig. 17116 T. Version with side airbag system 3 is indicated by AIRBAG text on outer side of front seat backrests. Seat occupancy recognition 3, see page 99.
104 Seats, interior Rollover protection system 3 The Astra TwinTop is equipped with rollover protection with reinforced windscreen frame and anti-roll bars behind the rear seat head restraints. Depending on the variant, the anti-roll bars are either fixed or deploy automatically in the event of an impact of a certain severity. The subsequent description only regards the variant with automatically deployed anti-roll bars 3.
Seats, interior In the event of a rollover, the anti-roll bars deploy upwards in a matter of milliseconds. They also deploy together with the front and side airbag systems 3, helping to optimise occupant protection. The system deploys with the roof open or closed. If the anti-roll bars are extended the roof must not be operated, see instructions in the following columns.
106 Seats, interior Have the cause of the fault eliminated immediately by a workshop. 9 Warning The roof cannot be closed or opened if the anti-roll bars are extended. The anti-roll bars must first be retracted. After deployment of the anti-roll bar, have the system repaired by a workshop immediately. Manually retracted anti-roll bars will not deploy in the event of a collision. Note z Do not place any objects on the covers of the anti-roll bars behind the head restraints.
Seats, interior Cigarette lighter 3 The cigarette lighter is in the front centre console, beneath the ashtray cover. The ashtray cover opens when pressed at the point indicated. Press in cigarette lighter. Switches off automatically once the element is glowing. Pull out lighter. 107 Accessory socket 3 Some vehicles have an accessory socket for the connection of electrical accessories instead of a cigarette lighter. Use of the accessory socket while the engine is not running will discharge the battery.
108 Seats, interior Electrical accessories connected to the socket must comply with the electromagnetic compatibility requirements laid down in DIN VDE 40 839, otherwise vehicle malfunctions may occur. If the tyre repair set is 3 is in operation, no consumers may be connected to the auxiliary socket. Estates have an additional accessory socket 3 in the luggage compartment. Do not damage the sockets by using unsuitable plugs.
Seats, interior To empty, grip both sides of the ashtray insert at the spots illustrated and pull upwards. Rear ashtray 3 The ashtray is in the rear centre console. Pull out the ashtray by pushing on one of the sides. 109 To empty, open the ashtray, press the spring (arrow) and pull the ashtray straight out rearwards.
110 Seats, interior Foldaway tables 3 on the front seat backrests. Open by pulling upward until it engages. Fold away by pressing down past the resistance point. Do not place any heavy objects on the table. Stowage compartments Glove compartment To open, pull handle upwards. The glove compartment shelf 3 can be removed: Disengage the shelf by pulling on the front edge. Refit the shelf by sliding it into the side guide strips and engage it in the rear panel by pushing.
Seats, interior Sun visors Use the sun visor to protect from glare by pulling it down and swivelling it to the side 3. The covers of the mirrors in the sun visors should be closed while driving. On vehicles with panoramic windscreen 3, close the sun visors before moving the roof lining. Stowage compartment for glasses 3 On driver’s side: fold down to open. Do not store heavy objects in the stowage compartment. Cargo box 3 See page 81.
112 Instruments, controls Instruments, controls Control indicators Control indicators ................................ Instrument display ............................... Information display ............................. Warning buzzers.................................. Windscreen wiper ................................ 112 119 122 140 141 The control indicators described here are not present in all vehicles. The description applies to all instrument versions.
Instruments, controls Illuminates Fault in Open&Start system. Lock or unlock vehicle using remote control or emergency key if necessary, see page 43, or attempt to use the spare key. I Engine oil pressure Control indicator illuminates red. Emergency operation, see page 44. It illuminates when the ignition is switched on and goes out shortly after the engine starts.
114 Instruments, controls v Airbag systems 3, belt tensioners 3, deployable anti-roll bars 3 Control indicator illuminates red. Illuminates when the engine is running Fault in airbag system, belt tensioners or extending anti-roll bars, see pages 87, 98, 104 v R Brake system, clutch system Control indicator illuminates or flashes red. It illuminates after the ignition is turned on, when the handbrake is applied or if the brake or clutch fluid level is too low. For further information see pages 222, 302.
Instruments, controls Q Doors and luggage compartment open Control indicator illuminates red. It is illuminated when a door or the luggage compartment is open. p A Engine electronics, transmission electronics 3, immobiliser, diesel fuel filter 3 Control indicator illuminates or flashes yellow. Alternator Control indicator illuminates red. It illuminates for a few seconds when the ignition is switched on. It illuminates when the ignition is switched on and goes out shortly after the engine starts.
116 Instruments, controls O Turn signal lights Control indicator flashes green. Control indicator flashes at the side concerned. Both control indicators flash with the hazard warning lights on. Fast flashing: failure of a turn signal light or associated fuse, failure of turn signal light on trailer 3. Change bulbs, see page 269. Fuses, see page 262. S 8 Engine oil level 3 Control indicator illuminates yellow. Exterior lights Control indicator illuminates green.
Instruments, controls > Fog lights 3 Control indicator illuminates green. It is illuminated when the fog lights are on – see page 145. T Winter programme of automatic transmission 3 or Easytronic 3 Control indicator illuminates in gear display with Winter programme engaged. Z Exhaust emission 3 Control indicator illuminates or flashes yellow. It illuminates when the ignition is switched on and goes out shortly after the engine starts. C Further information, see pages 180, 186, 193.
118 Instruments, controls w Deflation detection system 3, tyre pressure monitoring system 3 Control indicator illuminates red Tyre pressure loss – see page 218. Control indicator illuminates yellow Fault in system, see pages 218, 219. Contact a workshop for assistance. B Adaptive Forward Lighting 3 (AFL) Control indicator flashes yellow. ! Preheating system 3, diesel particle filter 3 Control indicator illuminates or flashes yellow.
Instruments, controls Instrument display On some versions, the pointer of the tachometer, speedometer and fuel gauge briefly moves to its end position when the ignition is switched on. Tachometer Indicates engine speed. Warning zone: Maximum permissible engine speed exceeded; danger to engine. Speedometer Speed display.
120 Instruments, controls Time display 3 To adjust the time, setting button in instrument panel: Press for approx. 2 seconds: Hours flash Press briefly Set hours Press for approx. 2 seconds Minutes flash Press briefly Set minutes Press for approx. 2 seconds Clock is started. Odometer display Top line: Trip odometer or clock display 3 To switch between the trip odometer and the clock display 3, press reset button briefly, see page 119. Trip odometer Display of miles covered since reset.
Instruments, controls ESPoff ESPon 121 For Easytronic 3, the display flashes for a few seconds if A, M or R is selected when the engine is running but the footbrake is not depressed. Electronic Stability Programme 3 off, see page 210. Electronic Stability Programme 3 on, see page 210.
122 Instruments, controls 12:01 17 ,0°C FM 3 90,6 MHz REG AS RDS TP 11:25 } 21 .5°C Timer Information display Triple information display Display of time, outside temperature and date/infotainment system (when it is on). When the ignition is off, the time, date and outside temperature can be presented for 15 seconds by briefly pressing one of the two buttons below the display. F in the display indicates a fault. Have the cause eliminated by a workshop. 1 257.0 Ø 40 8 7.0 Ø 31.
Instruments, controls The type of information and how it is displayed depends on the equipment of the vehicle and the settings of the Infotainment system 3, the trip computer 3 and the climate control system 3. Some information appears in the display in an abbreviated form. 123 : 8:56 -5 ,5°C 07.04.2004 Infotainment system, see Infotainment system instructions. Climate control system, see page 168. Slippery road -2,5°C OK F in the display indicates a fault. Have the cause eliminated by a workshop.
124 Instruments, controls 8:56 5 ,5°C 07.04.2004 Correcting time 3 Some RDS transmitters do not send a correct time signal. If the incorrect time is continually displayed, switch off automatic time synchronisation 3 and set the time manually - see next column. The automatic setting is indicated by } in the display. Deactivating/activating automatic time synchronisation: infotainment system off, press Ö and ; below the display: Hold down Ö for approx. 2 sec., clock display is now in setting mode.
Instruments, controls 11:25 } 125 21 .5°C Range 257miles Board information display 3, selecting functions Functions and settings of some equipment 3 can be accessed via the board information display. This is done using the menus and buttons of the Infotainment System 3 or with the left adjuster wheel 3 on the steering wheel. The corresponding menu options then appear in the next line of the display. If warning messages from Check-control 3 are shown, the display is blocked for other information.
126 Instruments, controls The functions are displayed in the following order: 11:25 } 21 .5°C System Board information display 3, system settings Press the Settings button of the infotainment system. Menu item Audio or System will appear. Press left arrow key to access menu point System. Select menu point System. The first function of the menu System is shown. Some information appears in the display in an abbreviated form.
Instruments, controls 127 The automatic setting is indicated by } in the display. To correct time with the help of RDS, select the menu item for time synchronisation from the Settings menu. Make the desired setting. Setting date and time Select the menu item for time and date setting from the Settings menu. 11:25 } 21 .5°C English 11:25 } 21 .5°C Unit Europe-SI Make the desired setting. The setting is saved when the menu item is exited.
128 Instruments, controls Board information display 3, trip computer 3 The trip computer provides information on driving data, which is continually recorded and evaluated electronically. Access trip computer vehicle data by pressing the BC button on the infotainment system or the left adjuster wheel 3 on the steering wheel. Some information appears in the display in an abbreviated form. Once an audio function has been selected, the subsequent rows of the trip computer function are displayed.
Instruments, controls 11:25 } 21 .5°C Range 257miles Range Range is calculated from current fuel tank content and instantaneous consumption. The display shows average values. After refuelling, the vehicle updates the range automatically after a brief delay. If less than 30 miles (50 km) can be driven with the fuel remaining in the tank, the warning "Range" appears on the display.
130 FM AS Instruments, controls [TP] 19,5° REG CDin MP3 90.6 MHz 19:36 Graphical information display 3 or colour information display 3, selecting functions The functions and settings of some equipment 3 can be accessed via the graphical information display or the colour information display.
Instruments, controls 7 FM AS [TP] REG CDin MP3 Settings Time, Date 131 19,5° 19:36 19:36 Language 90.6 MHz Units 10 . 07 . 2004 Contrast Day / Night 19,5° Select using left adjuster wheel 3 on steering wheel Turn up previous menu point. Turn down next menu point. Press Select marking, confirm commands. 19:36 6 Ign.
132 7 Instruments, controls Time, Date 19,5° 19:36 Time 19:36 Date 10 . 07 . 2004 6 Synchron. clock automatical. Setting the date and time 3 Select menu item Time, Date from the Settings menu. The menu for Time, Date is displayed. Correcting time 3 In systems with GPS receiver1), date and time are set automatically upon receipt of a GPS satellite signal. If the displayed time does not match local time, it can be corrected manually or automatically by receiving an RDS time signal2) 3.
Instruments, controls 7 13 Languages 19,5° 19:36 X Deutsch 7 Settings Language Español Units Nederlands Contrast Français Day / Night Italiano 6 Ign. logic Selections are indicated by a 6 in front of the menu item. In systems with voice output 3, when the language setting of the display is changed the system will ask whether the announcement language should also be changed – see Infotainment system instructions. 7 Contrast 19,5° 19:36 Time, Date English Select the desired language.
134 Instruments, controls Setting display mode 3 The display can be adjusted to suit the light conditions, black or coloured text on a light background or white or coloured text on a dark background. Select menu item Day / Night from the Settings menu. 2 Board Computer BC 1 BC 2 The options are displayed. Timer Automatic: adapted based on vehicle lighting. Tyres Always day design: black or coloured text on light background. Always night design: white or coloured text on dark background.
Instruments, controls Distance travelled Driven mileage display. The measurement can be reset to zero and restarted at any time, see "Resetting trip computer information to zero". Average speed Average speed calculation. The measurement can be reset to zero and restarted at any time, see "Resetting trip computer information to zero". Range 33miles Timer If the fuel in the tank will allow less than 30 miles (50 km) of travel, the warning "Range" appears on the display.
136 Instruments, controls 2 Reset BC 1 19,5° 19:36 257.0 Ø 40 7.0 Ø 31.0 2 Reset BC 1 19,5° 19:36 All values All values miles mph gal mpg The information of the two trip computers can be reset separately, making it possible to evaluate data from different time periods. Select the desired trip computer information. The value for the selected function will be reset and recalculated. 257.0 Ø 40 7.0 Ø 31.0 miles mph gal mpg To reset all information of a trip computer, select menu item All values.
Instruments, controls 137 The desired stop watch display can be selected from the Options menu 3: 2 Board Computer 19,5° 19:36 BC 1 BC 2 00:00:00 Timer Tyres Start Reset Options Stop watch Select menu item Timer from the Board Computer menu. The Timer menu is displayed. Driving Time excl. Stops The time the vehicle is in motion is recorded. Stationary time is not included. 2 Board Computer Driving Time incl. Stops The time the vehicle is in motion is recorded.
138 Instruments, controls Check control 3 Check control monitors some fluid levels, the tyre pressure 3, battery of the remote control, the anti-theft warning system 3, the brake light switch and important exterior lights, including cable and fuses. In trailer mode, the trailer lighting is monitored. Warning messages appear on the display. If there are several warning messages, they are displayed one after the other. Some of the warning messages appear on the display in an abbreviated form.
Instruments, controls If there is a fault in the vehicle lighting, the respective fault source is displayed as text, e.g.: Brake light check right In vehicles with tyre pressure monitoring system 3, if tyre pressure is too low, the display indicates which tyre to check, e.g.: Tyre pressure check rear right (value in bar) Check tyre pressure at next opportunity using suitable gauge. Tyre pressure monitoring system 3, see page 219. Checking tyre pressure, see page 337.
140 Instruments, controls Warning buzzers When starting the engine or whilst driving: z If the electronic key of the Open&Start system 3 is not present or is not recognised. z If seat belt 3 is not fastened. z If a door or the tailgate is ajar when the vehicle starts off. z Once you have reached a certain speed 3 if the handbrake is applied. z If a specified maximum speed 3 is exceeded.
Instruments, controls Windscreen wiper To activate, move stalk up lightly. § $ % & = = = = Off Timed interval wipe Slow Fast The stalk always moves back to starting position. Shift to next higher or lower level: move stalk slightly. Move stalk past resistance point and hold: the windscreen wiper stages are run through; an acoustic signal sounds at position §. Move stalk down from position §: Single swipe.
142 Instruments, controls To deactivate, push stalk forward lightly again. If the stalk is held forwards, the rear screen wash system is activated. Empty windscreen wash system and headlight wash system 3 To activate, pull stalk toward steering wheel. The wiper swipes for a few strokes. At low speeds, there is a single post-wash swipe. The headlight wash system 3 is ready for operation when the headlights are switched on. Wash fluid is sprayed onto the headlights once.
Lighting Lighting Exterior lights ....................................... Main beam, headlight flash ............... Automatic dipped beam activation 3 ......................................................... Turn signal lights ................................. Fog lights > 3 ..................................... Fog tail light r .................................... Reverse lights ....................................... Hazard warning lights......................... Headlight range adjustment ? .........
144 Lighting Main beam, headlight flash To switch from dipped beam to main beam, push stalk forward. To switch back to dipped beam, push stalk forward again or pull toward steering wheel. To activate the headlight flash, pull stalk toward steering wheel. Main beam is engaged for the duration of activation. The blue control indicator C is illuminated when main beam or headlight flash is on.
Lighting 145 After operation, the turn signal stalk returns to its starting position. Fog tail light r If the stalk is moved past the resistance point, the turn signal light remains on. When the steering wheel moves back toward the straight-ahead position, the turn signal light is automatically deactivated. On = Off = Tap signal: Move stalk to resistance point and release to activate three flashes from the turn signals when changing lanes or the like.
146 Lighting Vehicles without automatic level control system 0 = Front seats occupied 1 = All seats occupied 2 = All seats occupied and luggage compartment load 3 = Driver’s seat occupied and luggage compartment load Vehicles with automatic level control system Hazard warning lights Headlight range adjustment ? To switch on, press button ¨, to switch off, press button ¨ again. Manual headlight range adjustment 3 With dipped beam switched on, adjust headlight range in four steps to suit vehicle load.
Lighting Adaptive Forward Lighting 3 (AFL) improves lighting in curves (curve lighting) on vehicles with Bi-Xenon headlight system. 147 Curve lighting The Xenon light beam pivots based on steering wheel position and speed (from approx. 6 mph/10 km/h). Control indicator B for adaptive driving lights Flashing: Fault in system. System not ready for operation. The headlights shine at an angle of up to 15° to the right or left of the direction of travel.
148 Lighting Door-to-door light function3 Dipped beam and reverse lights 3 illuminate for around 30 seconds after the driver exits the vehicle and closes his door. To activate 1. Switch off ignition. 2. Remove ignition key 3. 3. Open driver’s door. 4. Pull turn signal stalk toward steering wheel. 5. Close driver’s door. If the driver’s door is left open, the lights will go out after two minutes.
Lighting 149 Entry lighting 3 After unlocking the vehicle, the instrument and switch lighting come on for a few seconds. Door handle lighting 3 When the exterior lights are on, the interior front door handles are illuminated. Illuminated mirror in the sun visors 3 The lighting switches on when the cover is opened. Glove compartment lighting on when lid is open. Front reading lights 3 Left and right reading lights are individually operable.
150 Lighting Battery discharge protection To prevent the battery from becoming discharged, the courtesy light, reading lights, luggage compartment lighting and glove compartment lighting switch off automatically 10 minutes after the ignition is switched off. Light covers The inside of the light covers may mist up briefly in poor, wet and cold weather conditions, in heavy rain or after washing. The mist disappears quickly by itself; to help, switch on the lights.
Infotainment system Infotainment system 151 Radio reception 3 Car radio reception differs from domestic radio reception: As the vehicle antenna is relatively near the ground, the broadcasting companies cannot guarantee the same quality of reception as obtained with a domestic radio using an overhead antenna. Radio reception 3................................ Infotainment system 3........................ Remote control on steering wheel 3 .. Twin Audio 3 .......................................
152 Infotainment system Mobile telephones and radio equipment 3 The Vauxhall installation instructions and the operating guidelines provided by the telephone manufacturer must be observed when fitting and operating a mobile telephone. Failure to do so could invalidate the vehicle’s operating permit (EU Directive 95/54/EG). Recommended prerequisites for fault-free operation: z Professionally installed exterior antenna to obtain the maximum range possible.
Infotainment system Obtain advice on predetermined installation locations for the external antenna and equipment holder and ways of using devices with transmission power of more than 10 Watts. We recommend that you consult your Vauxhall Authorised repairer, who will have brackets and various installation kits available as accessories and will install them in accordance with regulations.
154 Climate control Climate control Heating and ventilation system, air conditioning system 3................. Automatic air conditioning system 3 Electronic climate control system 3 ... Air vents ............................................... Cooled glove compartment 3 ............ Heated rear window 3, heated exterior mirrors 3 ................. Heated front seats 3........................... Heating and ventilation system ......... Air conditioning system 3...................
Climate control 155 The set values appear on the information display. Electronic climate control system, see page 168. Automatic air conditioning system 3 Electronic climate control system 3 Provides a comfortable interior regardless of the weather, outside temperature or season. Offers the greatest comfort in the vehicle interior regardless of the conditions outside.
156 Climate control Air vents The interior ventilation can be adjusted to a comfortable level by adjusting the temperature switch. To close the vent, turn the vertical adjuster wheel fully up. The symbol 0 appears. The slats of the vent remain open although the air supply is closed. To increase the air supply, turn the fan all the way up and set the air distribution switch to M or L. Windscreen defroster nozzles (2) Air distribution switch to l or J: Air flows onto windscreen and side windows.
Climate control 157 Heating takes place with the engine running and is switched off automatically after several minutes. Astra TwinTop: The headed rear window and heated exterior mirrors 3 are deactivated when the roof is open. The heated rear window automatically switches on when the diesel particle filter is being cleaned 3 depending on the engine.
158 Climate control Heating and ventilation system Air distribution Adjust with left rotary switch. L To head area via adjustable vents, to footwell M To head area via adjustable vents l To windscreen and front door windows J To windscreen and front door windows, to footwell K To footwell Intermediate settings are possible. Open the air vents when the switch is set to L or M. Temperature Adjust with centre rotary switch. Red area = Warm Blue area = Cold Air flow Adjust with right rotary switch.
Climate control Heating The amount of heat is dependent on the coolant temperature and is thus not fully attained until the engine is warm. The comfort and general well-being of the vehicle occupants are to a large extent dependent on a suitable ventilation and heating setting. For rapid warming of the passenger compartment: z Set air distribution switch to desired position, preferably position J, see page 158.
160 Climate control z Turn the temperature switch clockwise as far as it will go (warm). z Set fan switch to 3 or 4. z Activate heated rear window Ü. z Open side air vents as required and direct them towards the side windows. Heating the footwell z Set air distribution switch to K. z Move temperature switch to red zone. z Switch on fan. Window demisting and de-icing 9 Warning Failure to follow the instructions could lead to misted or icy windows and accidents stemming from impaired visibility.
Climate control 161 Air conditioning system 3 As a supplement to the heating and ventilation system, the air conditioning system cools and dehumidifies (dries) inflowing air. If cooling or dehumidification is not desired, switch off cooling in order to save fuel. Cooling switches off automatically at low outside temperatures. Cooling n Operate only with the engine on and the fan running: On = Press n Off = Press n again Control indicator in the button.
162 Climate control The air recirculation system minimises the entry of outside air. The humidity increases, and the windows can mist up. The quality of the passenger compartment air deteriorates which may cause the vehicle occupants to feel drowsy. Air distribution to l: the air recirculation system is automatically switched off to speed up window demisting and prevent fogging. Comfort setting z Set cooling n as desired. z Air recirculation system 4 off. z Set air distribution switch to M or L.
Climate control z Cooling n on, the AC compressor switches off automatically at low exterior temperatures (icing). z Move air distribution switch to l. z Turn the temperature switch clockwise. z Set fan switch to 4. z Open side air vents as required and direct them towards door windows. z Switch on heated rear window Ü. Automatic air conditioning system 3 Provides a uniformly comfortable interior regardless of the weather, outside temperature or season.
164 Climate control Automatic mode Basic setting for maximum comfort: z Set fan switch to A z Set air distribution switch to desired position - see next column z Use rotary switch to set temperature to 22 °C (a higher or lower temperature can be set as desired) z Air conditioning compressor activation, see page 165 z open all air vents. Deactivation of the air conditioning compressor can reduce the level of comfort and safety - see page 165. Air distribution Adjust with left rotary switch.
Climate control 165 Air flow Adjust with right rotary switch. 1 - 4 Manual fan speed setting, intermediate settings are possible A Automatic fan speed setting x Fan switched off To activate/deactivate air conditioning compressor (cooling) n Operate only with the engine on and the fan running: On = Press n Off = Press n again Manual air recirculation mode The air recirculation system prevents the entry of outside air and the air in the passenger compartment is circulated.
166 Climate control Heating The amount of heat is dependent on the coolant temperature and is thus not fully attained until the engine is warm. For rapid warming of the passenger compartment: z Set the air distribution switch to the desired position, see page 158. z Set the centre rotary switch to the desired temperature. We recommend a value of about 22 °C. Ventilation z For maximum ventilation in head area: set air distribution switch to M and open all vents.
Climate control 167 z Set temperature to maximum heating, i.e. turn the centre rotary switch all the way to the right (28 °C). z Switch on heated rear window Ü. Operation with cooling (air conditioning compressor) is not possible when outside temperatures are low. To switch off, press button V again; the automatic air conditioning system will operate at the settings selected previously. Maximum cooling for very hot interior Open windows and sunroof 3 briefly so that warm air can escape rapidly.
168 Climate control Electronic climate control system 3 Provides a the greatest amount of comfort in the interior regardless of the weather, outside temperature or season. FM AS To ensure a constant and comfortable climate in the vehicle, the temperature of the inflowing air, the air-flow rate and the air distribution are changed automatically according to climatic conditions outside the vehicle. Temperature changes due to external influences, such as direct sunlight, are automatically compensated.
Climate control 169 Switching off the AC compressor (Eco appears in display) can reduce comfort and affect safety, see page 171. Automatic air recirculation mode 3 The ventilation system is set to recirculation mode and interior air is recirculated. All air vents are actuated automatically in automatic mode. The air vents should therefore always be open, see page 156.
170 Climate control Temperature preset The left rotary switch can be used to set temperatures between 16 °C and 28 °C. For reasons of comfort, temperature can only be changed in small increments. Climate Air distribut. AC Air distribut. Autom. blower Auto. recirc Vehicles with Quickheat 3: depending on the outside temperature and the engine temperature the passenger compartment is heated up more quickly using an auxiliary electric heater. The auxiliary electric heater switches itself on automatically.
Climate control FM AS [TP] REG CDin MP3 90.6 MHz The air flow can be increased or decreased by turning the right switch. To return to automatic mode: press button V or AUTO. Heated rear window, see page 157. Window demisting and de-icing 9 Warning Failure to follow the instructions could lead to misted or icy windows and accidents stemming from impaired visibility. Misted or icy windows, e.g.
172 Climate control Air distribut. FM AS [TP] REG CDin MP3 90.6 MHz Air distribution Press the centre switch. The possible air distribution settings appear one after another in the display. Air flow Turn right switch right or left. The selected fan speed in indicated with x and the number in the display. Air distribution can also be set in the Air distribut. menu: At speed 0 both the fan and cooling (air conditioning compressor) are switched off.
Climate control 173 Climate Air distribut. AC Autom. blower Auto. recirc Automatic recirculation air control at bad outside air Residual air conditioning on Switching automatic recirculation 3 on or off The automatic air recirculation system has an air quality sensor to detect harmful gases in the outside air, in which case it will switch automatically to recirculation.
174 Climate control Pollen filter Note The pollen filter cleans dust, soot, pollen and spores from the air entering from outside. The active carbon layer 3 eliminates most odours and harmful ambient gases from the air. If the windscreen mists up during damp weather, set the system as described under "Demisting and defrosting the windows" for a short time, see pages 160, 163, 171. Have pollen filter replaced by a workshop in accordance with the intervals specified in the Service Booklet.
Climate control At least one air vent must be open while cooling 3 (air conditioning compressor) is on in order to prevent the evaporator from icing up due to lack of air movement. Cooling switches off automatically at low outside temperatures. Do not cover the sensor on the instrument panel as this could cause the climate control 3 system to malfunction.
176 Driving and operation Driving and operation Easytronic 3 The semi-automatic Easytronic transmission permits manual (manual mode) or automatic gear shifting (automatic mode), both with automatic clutch control. 9 Warning Disregard of these instructions may lead to injuries or endanger life. Easytronic 3 ......................................... Automatic transmission 3 .................. Automatic transmission with ActiveSelect 3 ................................... Driving hints ....................
Driving and operation 177 There is no need to select neutral before starting the engine. If a gear is engaged, the transmission automatically switches to neutral (N) before the engine starts when the footbrake is operated. This can lead to a slight delay in the starting process. Starting the engine Operate footbrake when starting the engine. The engine can only be started with the footbrake operated. "N" appears in the transmission display.
178 Driving and operation It is also possible to start off without depressing the footbrake if the accelerator pedal is operated directly after movement of the selector lever. If there is no immediate acceleration or the footbrake is not depressed, no gear is engaged and "A" flashes. After a few seconds, the display resumes showing "N". Start off by repeating the previously described procedure. In Automatic mode, selection of other gears is automatic irrespective of driving conditions.
Driving and operation If the vehicle is in automatic mode, on movement of the selector lever to + or Easytronic shifts to manual mode and changes up or down. "M" and the currently engaged gear appear in the transmission display. Move selector lever toward R Reverse gear. Engage only when vehicle is stationary. Depress the footbrake, release the handbrake and move the selector lever to R. Reverse gear is engaged. "R" appears in the transmission display.
180 Driving and operation If the Winter programme is activated, SPORT mode is deactivated. If the vehicle is switched to manual mode while the winter programme is active, the winter programme is interrupted. The winter programme resumes upon return to automatic mode. Winter programme T In the event of difficulties starting off on slippery roads, press button T ("A", currently engaged gear and T appear in the transmission display).
Driving and operation When the engine speed approaches its upper limit, the transmission shifts to a higher gear during kickdown even in Manual mode. Without kickdown this automatic shift is not effected in Manual mode. If SPORT mode is engaged, the drive wheels may spin slightly when starting off with kickdown. This allows for maximum acceleration of the vehicle.
182 Driving and operation Stopping the vehicle In Automatic or Manual mode, when the vehicle has stopped first gear (with Winter mode engaged, second gear) is engaged automatically and the clutch released. In R reverse remains engaged. Vehicle storage Before leaving the vehicle: z Engage handbrake. z Remove the ignition key or, with the Open&Start system 3, remove the electronic key from the vehicle.
Driving and operation If the cause of the power failure is not a discharged battery, contact a workshop. If the vehicle must be removed from flowing traffic, release the clutch on vehicles with 5-speed Easytronic. On vehicles with 6-speed Easytronic, the clutch cannot be released 3; if the vehicle must be moved, raise vehicle at the front to tow. To disengage the clutch (only on vehicles with 5-speed Easytronic) 1. Apply handbrake and switch off ignition. 2. Prop bonnet open, see page 241.
184 Driving and operation Automatic transmission 3 The automatic transmission 3 allows automatic selection. The engine can only be started when the gear selector is in position P or N. When starting in position N, depress the footbrake or apply the handbrake. After starting the engine, depress the brake before selecting a gear. Do not accelerate whilst selecting a gear. If a gear has been selected and the brake is released, the vehicle will "creep".
Driving and operation The selector lever can only be moved from P when the ignition is switched on and the footbrake depressed (selector lever lock). To engage P or R, push button on selector lever. The engine can only be started with lever in position P or N. When position N is selected, press footbrake or engage handbrake before starting. 185 Gears 3, 2, 1 3, 2, 1 Transmission does not shift above the selected gear Press button on selector lever to engage 3 or 1.
186 Driving and operation z Automatic neutral shift function automatically sets the transmission to N to reduce fuel consumption, e.g. at traffic lights.
Driving and operation Engine braking In order to utilise the engine braking effect when driving downhill, select drive range 3, 2 or, if necessary, 1 in good time. Gear 1 has the greatest braking effect. If gear 1 is selected at too high a speed, the transmission remains in second gear until the shift point for first gear is reached, e.g. as a result of deceleration. Kickdown Depressing the accelerator pedal past the pressure point: depending on the engine speed the transmission shifts to a lower gear.
188 Driving and operation Stopping the vehicle The selector lever can be left in the chosen gear with the engine running. When stopping on gradients engage handbrake or depress brake pedal. To prevent overheating of the transmission, do not increase engine revolutions to ensure smooth idling while standing if a gear has been selected. Switch off engine if stopping for a lengthy period, e.g. in traffic jams or at level crossings.
Driving and operation 189 The transmission no longer shifts automatically. Vehicle can continue to be driven. Second gear is not available. Forward gears 1, 3 and 4 must be shifted manually using selector lever: 1 = 1st gear 2 = 3rd gear 3, D = 4th gear Interruption of power supply If the vehicle battery is flat, the selector lever cannot be moved out of position P. 3. Push the yellow catch forward with a screwdriver and move the selector lever out of P.
190 Driving and operation Automatic transmission with ActiveSelect 3 This automatic transmission 3 allows both automatic gearchanges (automatic mode) and manual gearchanges (manual mode) 3. The engine can only be started when the selector lever is in position P or N. When starting in position N, depress the footbrake or apply the handbrake. After the engine has started, depress the brake before selecting a gear. Do not accelerate whilst selecting a gear.
Driving and operation 191 The selector lever can only be moved out of position P or N with the ignition switched on and the footbrake applied (selector lever lock). In selector lever position N the selector lever lock is activated after a delay and only if the vehicle is stationary. Selector lever settings P, R, N and D (automatic mode) P Park position. Front wheels locked. Only engage when the vehicle is stationary and the handbrake is applied. "P" appears on the transmission display.
192 Driving and operation If the engine speed is too slow, the transmission automatically shifts down, but not if the gear was selected below a certain speed. If a higher gear is selected below a certain speed, the transmission does not shift back. No automatic shifting to a higher gear takes place at high engine revs. For safety reasons, kickdown is also available in manual mode, see page 194. ActiveSelect (manual mode) Move selector lever out of position D and then forwards or backwards.
Driving and operation z Automatic neutral shift function automatically sets the transmission to N to reduce fuel consumption, e.g. at traffic lights.
194 Driving and operation To deactivate The winter program is switched off by: Engine braking The automatic transmission automatically selects the driving programs with the best possible braking effect. z pressing button T again, z changing to manual mode, z turning off the ignition. If necessary, lower gears can also be selected in manual mode to increase the braking effect. 1st gear has the greatest braking effect.
Driving and operation "Rocking the car" If it becomes necessary to rock the vehicle to free it from sand, mud, snow or a hole, move the selector lever from D to R in a repeat pattern while simultaneously applying light pressure to the accelerator pedal. Do not race the engine and avoid sudden acceleration. 195 Stopping the vehicle The selector lever can be left in the chosen gear with the engine running. When stopping on gradients engage handbrake or depress brake pedal.
196 Driving and operation The ignition key can only be removed when the selector lever is in position P. 2nd gear and the highest gear can be selected in manual mode. Depending on the nature of the problem, only the highest gear may be available. If the selector lever is not in position P when the ignition is switched off, control indicator j and P flash in the selector lever indicator strip, see Fig. S 12103 on page 191. Move the selector lever to position P.
Driving and operation 197 Reselecting P or N causes locking again. Have a workshop eliminate the cause of the power loss. Interruption of power supply If the vehicle battery is flat, the selector lever cannot be moved out of position P or N. If the battery is flat, start the vehicle using jump leads, see page 243. If the battery is not the cause of the fault, release selector lever: 1. Apply handbrake. 2.
198 Driving and operation Driving hints The first 600 miles (1000 km) Drive your vehicle at various speeds. Do not use full throttle. Never allow the engine to labour at low revs. Make good use of all gears. Depress the accelerator pedal a maximum of around three quarters of the available pedal travel in all gears. Do not drive faster than three quarters of maximum speed. Do not brake unnecessarily hard for the first 125 miles (200 km).
Driving and operation Overrun The fuel supply is automatically shut off during overrun, e.g. when the vehicle is being driven down long gradients or when braking. To enable the overrun cut-off to take effect, do not accelerate during overrun and, if in manual transmission mode, do not de-clutch. To prevent damage to the catalytic converter, overrun cut-off is temporarily deactivated when the catalytic converter temperature is high.
200 Driving and operation Saving fuel, protecting the environment Trend-setting technology In the development and manufacture of your vehicle, environmentally-friendly and in the main recyclable materials were used. The production methods used to make your vehicle are likewise environmentallyfriendly. Recycling of production wastes keeps the circulation of material closed. Reduction of energy and water requirements also helps to conserve natural resources.
Driving and operation Overrun z The fuel supply is automatically shut off during overrun, e.g. when the vehicle is being driven down long gradients or when braking, see page 199. z To enable the overrun cut-off to come into action and save fuel, do not accelerate or de-clutch during overrun. Correct gear selection z High revs increase engine wear and fuel consumption. z Do not race your engine. Avoid driving at high engine speeds. Making use of the tachometer helps to save fuel.
202 Driving and operation Fuels, refuelling Fuel consumption Fuel consumption is determined under specific driving conditions, see page 316. Special equipment increases the weight of the vehicle. As a result, they can increase fuel consumption and reduce the specified maximum speed. For the first few thousand miles, friction between the engine and transmission components is higher. This increases fuel consumption.
Driving and operation 203 Fuel filler cap If replacing the fuel filler cap, be sure to use a genuine fuel filler cap for your model to ensure full functionality. Diesel-engined vehicles have special fuel filler caps. Refuelling Fuel filler neck at right rear side of vehicle. 9 Warning The tank flap is locked together with the doors, see page 40. Care must be taken when handling fuel. Open the tank flap.
204 Driving and operation Correct filling depends to a large extent on proper operation of the fuel dispensing pump: 1. Fully insert the pump nozzle and switch it on. 2. After automatic switch off, the specified tank capacity is reached after continued, measured filling. Leave the filler nozzle in place until the stop. To close, position the fuel filler cap and rotate past the resistance until the cap audibly clicks over the retainer. Close fuel tank cover. Wipe off any overflowing fuel immediately.
Driving and operation Damage to the catalytic converter or the vehicle may result if the following points are not observed: z On ignition faults, uneven running after cold start, a clear drop-off in engine power or other unusual operating symptoms which could indicate a fault in the ignition system, contact a workshop as soon as possible. Continue driving if necessary for a short time at low speed and low revs.
206 Driving and operation Controlling exhaust emission Some of the damaging substances in the exhaust such as carbon monoxide (CO), hydrocarbons (HC) and nitrous oxides (NOx) are reduced to a minimum by making structural changes – mainly in the injection system and the ignition system in conjunction with the catalytic converter. Control indicator Z for exhaust Illuminates when the ignition is switched on and during the start attempt. Goes off shortly after the engine starts running.
Driving and operation If it illuminates briefly, but does not recur, it is of no significance. Illumination of A can indicate water in the diesel fuel filter 3, at the same time a message appears in the service display, see page 120. Have a workshop check the fuel filter for possible water residue. If it flashes after the ignition is switched on, there is a fault in the immobiliser system. The engine cannot be started, see page 31.
208 Driving and operation The self-cleaning function will automatically operate while driving after the engine has reached its normal operating temperature. The control indicator ! will continue to flash until the self-cleaning operation is complete. This may take up to 20 minutes of driving. The time will be shorter at higher vehicle speeds. If the vehicle is not moving for more than a few minutes, then the selfcleaning function will not operate. Operation will continue when driving resumes.
Driving and operation The control indicator ! goes off as soon as the self-cleaning operation is complete. Maintenance Have all maintenance work carried out at the intervals specified. We recommend that you entrust this work to your Vauxhall Authorised Repairer, who has proper equipment and trained personnel available. Electronic testing systems permit rapid diagnosis and remedy of faults.
210 Driving and operation Electronic Stability Programme (ESP®Plus) 3 ESP®Plus improves driving stability as necessary in any driving situation regardless of the type of road surface or tyre grip. It also prevents the drive wheels from spinning irrespective of road surface and tyre grip. The system monitors vehicle movements. As soon as the vehicle starts to swerve (understeers/oversteers) engine output is reduced (the sound of the engine changes) and individual wheels are specifically braked.
Driving and operation Continuous Damping Control 3 (CDC) CDC adapts vehicle damping to the current driving situation and road conditions. Illuminates while driving: The system is switched off or a fault is present. Continued driving is possible. The driving stability can however deteriorate depending on road surface conditions. The system continually monitors wheel and vehicle movements and immediately modifies the damping of each shock absorber.
212 Driving and operation SPORT mode 3 SPORT mode is used to change damping 3, steering 3, throttle application 3 and the shift point for automatic transmission 3 and Easytronic 3 while driving. Damping and steering become more direct and provide better contact with the road surface. The engine reacts more quickly to accelerator movements. For automatic transmission 3 and Easytronic 3, the shift times are reduced and gear changes occur at higher engine speeds (not when cruise control is on).
Driving and operation 213 Cruise control 3 Cruise control can store and maintain speeds between 20 mph (30 km/h) and 125 mph (200 km/h). Deviation from the stored speed may occur when driving up or downhill. To deactivate Briefly press the SPORT button again or switch off the ignition. The LED in the button goes out. Holding it pressed switches off ESP®Plus, see page 211. SPORT mode remains engaged. For safety reasons the cruise control cannot be activated until the footbrake has been operated once.
214 Driving and operation With automatic transmission 3, only use cruise control in D or in automatic mode with Easytronic 3. When the cruise control is active, reaction times may be increased due to the different position of the feet. 9 Warning The driver is always responsible for ensuring that vehicle speed is appropriate for the speed limit and driving conditions - even if cruise control is engaged. Failure to follow the instructions could lead to injuries or endanger life.
Driving and operation Increase With cruise control active, hold down button m or briefly press it repeatedly: speed is increased continuously or in steps of 1.2 mph (2 km/h) without using the accelerator pedal. To deactivate Briefly press button §: Cruise control is switched off, control indicator m goes out and the vehicle slowly decelerates. To continue driving, depress the accelerator pedal in the usual manner. When button m is released the current speed is stored and maintained.
216 Driving and operation If the vehicle approaches an obstacle when reversing, a series of signals can be heard in the vehicle interior. The interval between the signals becomes shorter as the distance is reduced. If the distance is less than 30 cm, the signal will be continuous. 9 Warning To activate The parking distance sensor system activates automatically when the ignition is switched on and reverse gear is engaged. Its operational readiness is indicated by illumination of the LED in button r.
Driving and operation Flashing: The fault is due to sensors obstructed with snow or ice. The sensors must be undamaged and free of dirt, snow and ice. Caravan/trailer towing equipment 3, caravan/trailer towing The system automatically detects if a towbar is properly fitted to the vehicle. Interference due to external sources of ultra sound (e.g. pneumatic drills, rotary machines). Once the source of interference is removed, the system will operate normally.
218 Driving and operation The vehicle is automatically raised at the rear, increasing the spring travel and ground clearance. The automatic level control system is activated after approx. 1.9 miles (3 km), depending on the vehicle loading and the nature of the road surface. Headlight range adjustment, see page 146. On function faults, do not utilise full load capacity. Have the cause of the fault eliminated immediately by a workshop.
Driving and operation Tyre pressure monitoring system 3 The tyre pressure monitoring system continually checks the pressure and speed of all four wheels while driving. Control indicator w If control indicator w illuminates red while driving, there is a loss of pressure. Stop immediately and check tyre pressures. A maximum speed of 50 mph (80 km/h) is permitted for run-flat tyres 3. Observe the information on page 230. A pressure sensor is integrated in each wheel.
220 Driving and operation Once the ignition is switched on, the system is operational and will continuously monitor the tyre pressures at speeds of approx. 20 mph (30 km/h) and above. 9 Warning The tyre pressure monitoring system does not replace manual checks with a suitable gauge. 2 Board Computer BC 2 Tyre pressure Timer check rear left (value in bar) Tyres Check tyre pressures at least every 14 days and prior to any long journey; the tyres should be checked when cold.
Driving and operation 221 Navi active Attention! Front left tyre pressure loss (value in bar) OK A graphic indicating the front left tyre is shown together with the current tyre pressure: Significant pressure deviation or direct pressure loss! Steer out of flow of traffic as quickly as possible without endangering other drivers. Stop and check the tyres. Mount the spare wheel 3 if necessary - see pages 249, 252. A maximum speed of 50 mph (80 km/h) is permitted for run-flat tyres 3.
222 Driving and operation General information The tyre pressure monitoring system does not function when the emergency or a spare wheel not fitted with a pressure sensor is used, and the control indicator w illuminates yellow. The tyre pressure display shows –.–. The tyre pressure is then monitored by the deflation detection system, see page 218. If a complete set of wheels without tyre pressure control system sensors is mounted (e.g. four winter tyres), no error message will be displayed.
Driving and operation Footbrake The footbrake comprises two independent brake circuits. If one brake circuit fails, the vehicle can still be braked with the other brake circuit. However the braking effect will occur at a lower pedal position and considerably more force is required. The braking distance is longer. Contact a workshop before continuing to drive.
224 Driving and operation Anti-lock Brake System (ABS u) ABS continually monitors the brake system and prevents the wheels from locking regardless of the type of road surface or tyre grip. Handbrake Always apply handbrake firmly without operating the release button, and apply as firmly as possible on a downhill or uphill slope. Brake system control indicator R The control indicator illuminates when the ignition is switched on if the handbrake is applied or if the brake or clutch fluid level is too low.
Driving and operation Wheels, tyres Fault 9 Warning If there is a fault in ABS, the wheels may be subject to locking due to braking that is heavier than normal. The advantages of ABS are no longer operational. The vehicle can no longer be steered and may swerve. You can continue driving, provided you drive with care and anticipation. Control indicator u for ABS It comes on for a few seconds after the ignition is turned on. The system is ready for operation when the control indicator goes out.
226 Driving and operation Vehicles with tyre pressure monitoring system 3 With winter tyres or after conversion to different wheel sizes, sensors for the tyre pressure monitoring system can be fitted by a workshop on request. Otherwise the system would not show the tyre pressure deviations. Deflation detection system 3, see page 218, tyre pressure monitoring system 3, see page 219. Vehicles with run-flat tyres 3 When switching wheels, e.g.
Driving and operation 227 Some brands of tyres have a beaded edge for alloy wheels to protect against damage. If wheel trim is used on steel wheels with beaded-edge tyres, the following specification must be followed: z Use of wheel trims and tyres that approved by Vauxhall for the vehicle in question and thereby fulfil all requirements for the wheel and tyre combination. z If the wheel trims and tyres used are not Vauxhall-approved, the tyres must not have a beaded edge.
228 Driving and operation Hidden tyre damage is not eliminated by adjusting the inflation pressure. 9 Warning Incorrect tyre pressure could lead to a flat tyre. After having checked the tyre pressure, tighten the valve caps using the valve cap key. Incorrect inflation pressures will impair safety, vehicle handling, comfort and fuel economy and will increase tyre wear.
Driving and operation 229 Check tyres regularly for damage (penetrated foreign bodies, punctures, cuts, cracks, bulges in side walls). Check wheels for damage. If damage or unusual wear is found, contact a workshop. 9 Warning Damage may lead to tyre blow-out. Tread depth Check tread depth regularly. If wear in the front is greater than that in the rear, move the rear wheels to the front axle and vice versa. Correct the tyre pressure.
230 Driving and operation General information z The danger of aquaplaning is greater if the tyres are worn. z Tyres age, even if they are used only very little or not at all. A spare wheel which has not been used for six years should be used only in emergencies; drive slowly when using such tyres. z Never fit used tyres the previous history and use of which you do not know. z So as not to impair brake cooling, use only wheel trims approved for use on your vehicle. Tyre designations Meanings: e.g.
Driving and operation Driving with a damaged tyre A loss in tyre pressure is indicated by the tyre pressure monitoring system 3 or the deflation detection system 3. Winter tyres 3 For notes on fitting new tyres, see page 225. If a tyre has no pressure, continued driving is possible Winter tyres improve safety at temperatures below 7 °C and should therefore be fitted on all the wheels. z at a speed of max. 50 mph (80 km/h) z up to a distance of 50 miles (80 km).
232 Driving and operation Wheel trim on steel wheels could come into contact with parts of the chain and be damaged. Remove the wheel trim, see page 252. Tyre chains may only be used at speeds up to 30 mph (50 km/h) and, when travelling on roads that are free of snow, they may be used for brief periods only since they are subject to rapid wear on a hard road and may snap. Tyre chains 3 Limitations and further information, see page 337. Tyre chains are only permitted on the drive wheels (front axle).
Driving and operation 233 Towing equipment 3 9 Warning Disregard of these notes can lead to injuries which may be fatal. Vehicle passengers should be informed accordingly. Version without roof railing Lift the covers from the fitting openings. Attach roof rack at appropriate points, see enclosed roof luggage rack system instructions. Version with roof railing 3 To attach the roof rack, insert mounting bolts in the bores shown in the picture, see instructions provided with the roof rack system.
234 Driving and operation Stowage of coupling ball bar In Hatchbacks, the coupling ball bar is in a pouch, fastened in the luggage compartment cargo box with a strap - see page 237. In Estates, the coupling ball bar is fastened with a strap in a compartment in the spare wheel well of the luggage compartment. Fitting the coupling ball bar Disengage and fold down the socket. Remove the sealing plug from the hole for the coupling ball bar and stow it in the luggage compartment.
Driving and operation Otherwise, the coupling ball bar must be tensioned before it is inserted into the coupling housing: z Unlock coupling ball bar (key to position 1), see Fig. 17222 T on page 234. z Pull turn knob out and then turn it clockwise as far as it will go, see Fig. 17223 T. Inserting the coupling ball bar Insert the tensioned coupling ball bar into the coupling housing and push firmly upwards until the coupling ball bar audibly engages in position.
236 Driving and operation Important Check that the coupling ball bar is correctly installed: z Green marking on turn knob points towards white marking on coupling ball bar. Insert the sealing plug in the hole for the coupling ball bar. Fold away the socket, see Fig. 17221 T on page 234. Do not use steam-jet cleaners or other high-pressure cleaners to clean the coupling ball bar. z No gap between turn knob and coupling ball bar. z Coupling ball bar must be seated firmly in coupling housing.
Driving and operation Caravan/trailer towing Caravan and trailer loads1) The permissible caravan/trailer loads are vehicle- and engine-dependent maximum values which must not be exceeded. The actual caravan/trailer load is the difference between the actual gross weight of the caravan/trailer and the actual coupling socket load with the caravan/trailer coupled.
238 Driving and operation The actual caravan/trailer load plus the actual gross weight of the towing vehicle must not exceed the maximum permitted towing weight. For example, if the permitted gross vehicle weight is utilised, the trailer/caravan load must only be used until the maximum permitted towing weight is reached. The maximum permitted towing weight is shown on the identification plate, see page 308.
Driving and operation 239 Trailer Stability Assist 3 (TSA) TSA monitors vehicle movements when towing a caravan or trailer. If the system detects lurching movements, engine power is reduced and the vehicle/trailer combination is selectively braked until the lurching ceases. TSA is a function of the electronic stability programme (ESP®Plus), see page 210. Tyre pressure Increase the tyre pressure on the towing vehicle to the value specified for a full load, see page 337.
240 Driving and operation Caravans/trailers with LED turn signals must have a provision that makes it possible to monitor standard light bulbs. If the trailer/caravan starts to sway, drive more slowly, do not attempt to correct the steering and brake sharply if necessary. Turn signal control indicator - see page 116. If it is necessary to apply the brakes fully, depress the brake pedal as hard as possible. Parking distance sensor 3 is deactivated when towing.
Self-help, vehicle care Self-help, vehicle care Diesel fuel system, bleeding ............... Bonnet .................................................. Starting................................................. Starting the engine with jump leads 3 ......................................................... Towing .................................................. Warning triangle ¨ 3......................... First-aid kit (cushion) + 3................... Spare wheel 3......................................
242 Self-help, vehicle care The bonnet is held open automatically 3. Starting In an alternative version, the bonnet is held open by inserting the support that is located across the radiator into the small elongated hole in the underside of the bonnet. Do not start with quick charger This prevents damage to electronic components. Push support firmly into holder before closing the bonnet. Lower bonnet and allow to fall into lock. Check that the bonnet is locked in position by pulling at its front edge.
Self-help, vehicle care Starting the engine with jump leads 3 A vehicle with a discharged battery can be started using jump leads and the battery of another vehicle. 243 z Use auxiliary battery with same voltage (12 volts). Its capacity (Ah) must not be considerably less than that of the discharged battery. Voltage and capacity information can be found on the batteries. 9 Warning z Use jump leads with insulated terminals and a cross section of at least 16 mm2 (25 mm2 for diesel engines).
244 Self-help, vehicle care z Do not connect leads to negative terminal of discharged battery! z The connection point should be as far away from the discharged battery as possible. z Route the leads so that they cannot catch on rotating parts in the engine compartment. z Start the engine of the vehicle providing the jump start. Connect the leads in the order – see Fig. 17230 T: 1.
Self-help, vehicle care Vehicles with the Open&Start system 3 must not be towed when the battery is discharged because the steering column lock cannot be released. Towing is only possible with the ignition switched on. Use jump leads to start the engine if necessary. Manual transmission or Easytronic 3 in neutral, automatic transmission 3 in N. Drive slowly. Do not drive jerkily. Excessive tractive force can damage the vehicle.
246 Self-help, vehicle care Towing another vehicle To open the cover concealing the towing eye socket at the rear right of the vehicle: disengage the cover at the bottom and pull it off downwards. On some versions 3: remove the cover concealing the towing eye at the rear right of the vehicle by disengaging the tabs at the bottom and pulling off the cover from the top. Screw in the towing eye anti-clockwise as far as it will go until it stops in a horizontal position.
Self-help, vehicle care Warning triangle ¨ 3 Hatch, Astra TwinTop Store warning triangle in rear luggage compartment wall: first fit warning triangle into recess on left and the insert in guide on right. To remove the warning triangle, lift to the right and pull out to the right. For vehicles with cargo box 3: Lift the warning triangle with the right half of the cargo box. Pull out the warning triangle to the right.
248 Self-help, vehicle care Estate Fasten the first-aid kit (cushion) to the left luggage compartment wall with a retaining strap. Van Place first-aid kit in stowage compartment behind driver’s seat. To open the cover, press the locking tab. Astra TwinTop Store the first-aid kit (cushion) in the recess behind the strap in the left luggage compartment wall.
Self-help, vehicle care Spare wheel 3 249 Stowing wheels with wide tyres in the spare wheel well The spare wheel well is not designed for all permitted tyre sizes. If a wheel wider than the spare must be stowed in the spare wheel well after changing wheels, the floor cover can be placed on the projecting wheel. Some vehicles are equipped with a tyre repair kit instead of a spare wheel – see page 256.
250 Self-help, vehicle care General information Depending on version, the spare wheel may be in the form of a temporary spare wheel 3. Refer to the notes on this page and pages 232, 255, 337. On vehicles with alloy wheels 3 the spare wheel may have a steel rim. Estate Take adapter 3 and hooks 3 from the rails 3 in the luggage compartment walls. Raise the rear lashing eyes and lift the floor cover to the vertical position so that it rests on the roof lining.
Self-help, vehicle care 251 Notes on directional tyres 3 Directional tyres only provide maximum performance when they are mounted in the correct direction of rotation. If the tyres or spare wheel must be mounted opposing the specified direction of rotation (e.g. after changing a flat tyre), observe the following: z Vehicle handling may change. Have the defective tyre replaced as soon as possible, and have the wheel balanced and mounted on the vehicle. z Do not drive faster than 50 mph (80 km/h).
252 Self-help, vehicle care Changing wheels There may be a tyre repair kit instead of a spare wheel, see page 256. To ensure your safety, make the following preparations and observe the following information when changing wheels: z Park the vehicle on a level, firm and non-skid surface. z Switch on hazard warning lights, apply handbrake, automatic transmission 3 – selector lever in P, manual transmission or Easytronic 3 – engage 1st or reverse gear. z Correctly set up the warning triangle 3.
Self-help, vehicle care 1. Prise off the wheel trim using the hook included with the vehicle tools 3. For vehicle tools, see page 251. For wheel trims with visible wheel bolts 3: The trim can remain on the wheel. Do not remove the retaining washers 3 on the wheel bolts. Alloy wheels 3: Disengage the wheel bolt caps with a screwdriver and remove. Protect the wheel by inserting a soft cloth between the screwdriver and alloy wheel. 253 2.
254 Self-help, vehicle care 3. The location of each jacking point 3 is indicated by a mark on the bottom edge of the vehicle. On Astra VXR and vehicles with wheelarch trims 3 or after-market trims, jacks may not be used 3. The vehicle may be damaged. 4. Before positioning the jack 3, set it to the necessary height by rotating the eye by hand. Position the jack 3 at the front or rear so that the jack claw spans the vertical base and grips in the recess in the vertical base.
Self-help, vehicle care 10. Before refitting the wheel trim, clean the wheel around the retaining clips. Valve symbol 3 on back of wheel trim must point towards valve on wheel. Align and refit wheel trim or wheel bolt caps 3. Alloy wheels 3: Align and refit wheel bolt caps 3. 11. Stow replaced wheel, tools and warning triangle 3 in luggage compartment, see pages 247 to 251. 6. Change the wheel. Notes on spare wheel, see page 249, notes on temporary spare wheel, see page 250. 7.
256 Self-help, vehicle care Tyre repair kit 3 Minor damage to the tyre tread or side wall, e.g. from foreign bodies, can be repaired using the tyre repair kit (does not apply to run-flat tyres). Do not remove the foreign body from the tyre. Tyre damage exceeding 4 mm or damage to the wheel rim cannot be repaired with the tyre repair kit. 9 Warning Vehicles with insufficient or no tyre pressure can lead to invisible damage to the tyre. This damage cannot be repaired with the tyre repair kit.
Self-help, vehicle care 4. Screw the compressor air hose to the connection on the sealant bottle. 5. Fit the sealant bottle into the retainer on the compressor. Set the compressor near the tyre in such a way that the sealant bottle is upright. 6. Remove the valve cap from the defective tyre. 7. Screw the filler hose to the tyre valve. 8. The switch on the compressor must be set to §. 9. Connect the compressor plug to the accessory socket or cigarette lighter socket. Accessory socket, see page 107.
258 Self-help, vehicle care Drain excess tyre pressure with the button over the pressure indicator. Do not run the compressor for more than 10 minutes - see "Important information" on page 259. 14. Detach the tyre repair kit. Screw the filler hose to the free connection on the sealant bottle. This prevents sealant leakage. Stow the tyre repair kit in the luggage compartment. 15. Wipe away any sealant spill with a cloth.
Self-help, vehicle care Important Information 9 Warning Do not drive faster than 50 mph (80 km/h). Do not use the temporary spare wheel for a lengthy period. Steerability and driving behaviour may be impaired. The driving comfort of the repaired tyre is severely affected, therefore have this tyre replaced. If the compressor makes abnormal noises or heats up greatly, switch it off for at least 30 minutes. The integrated safety valve opens at a pressure of 7 bar.
260 Self-help, vehicle care We recommend carrying a complete set of fuses. Put spare fuses in the provided location in the fusebox in the luggage compartment. Open cover, see page 262. Before replacing a fuse, turn off the respective switch and the ignition. A blown fuse (see figures to the right) can be recognised by its melted wire. Do not install a new fuse until the cause of the fault has been remedied. Different versions of fuses are used.
Self-help, vehicle care There is a fuse extractor in the luggage compartment fusebox to facilitate replacement of fuses – see Fig. 17258 T for an example. Place the fuse extractor on the various types of fuse from the top or side, and withdraw fuse. 261 Only fit fuses of the specified current rating. Each fuse has its current rating written on it, in addition the ratings are colour coded.
262 Self-help, vehicle care Fuses and the most important circuits they protect Fusebox in luggage compartment Depending on the equipment version, there are two different fuseboxes in the luggage compartment for differing electrical circuits. z Version A – see Fig. 18504 T on page 263. z Version B – see Fig. 17958 T on page 264. The Astra TwinTop always has version B. Spare fuses, fuse extractor, see page 259. The fusebox is located on the left side of the luggage compartment behind a cover.
Self-help, vehicle care Fusebox, version B Some functions are protected by several fuses. No. 1 2 3 4 Fusebox, version A Some functions are protected by several fuses. To replace a fuse, pull off its protective cap. No. 1 2 3 4 5 6 7 8 Circuit Fog lights – Luggage compartment socket Reverse lights Electric windows, rear Air conditioning system Electric windows, front Heated exterior mirrors Rating 15 A – 15 A 7.5 A 30 A 10 A 30 A 7.
264 Self-help, vehicle care No. Circuit 38 Central locking system, terminal 30 39 Seat heater (left) 40 Seat heater (right) 41 – 42 – 43 – 44 – No. 24 25 26 27 28 29 30 31 Circuit Diagnostics plug – Electrically retractable exterior mirrors Ultrasonic sensor, Vauxhall alarm system – Cigarette lighter, front socket Rear socket – Rating 7.5 A – 7.5 A 5A – 15 A 15 A – No.
Self-help, vehicle care Depending on the equipment version, there are two different fuse layouts for the engine compartment fusebox, handling different electrical circuits: z If the luggage compartment fusebox is version A - see Fig. 18504 T on page 263 - the fuse layout in the engine compartment is version A – see next column. Fuse layout, version A Some functions are protected by several fuses. No.
266 Self-help, vehicle care No. 21 22 23 24 25 26 27 No. Circuit 6 Radiator fan 21) 7 Central locking system 8 Windscreen wash system, tailgate 9 Heated rear window, heated exterior mirrors 10 Diagnostics plug 11 Instruments 12 Mobile telephone, digital radio, Twin Audio, display 13 Courtesy light 1) Rating 20 A 30 A 40 A 20 A 10 A 30 A 7.5 A 7.5 A 7.5 A 5A Different ratings depending on engine and equipment level. No.
Self-help, vehicle care Fuse layout, version B Some functions are protected by several fuses. No. 1 2 3 Circuit ABS ABS Interior fan climate control system 4 Interior fan, heating, air conditioning system 5 Radiator fan 11) 6 Radiator fan 21) 1) Rating 20 A 30 A 30 A 30 A 30 A 40 A 20 A 30 A 40 A Different ratings depending on engine and equipment level. No.
268 No. 24 25 26 27 28 29 30 Self-help, vehicle care Circuit Fuel pump Transmission electronics Engine electronics Power steering Transmission electronics Transmission electronics Engine electronics Rating 15 A 15 A 10 A 5A 5A 7.5 A 10 A No.
Self-help, vehicle care 269 Bulb replacement Before replacing a bulb, switch ignition off and turn appropriate switch off. Only hold new bulb at base! Do not touch the bulb glass with bare hands, otherwise fingerprints on the glass evaporate. Residue builds up on the reflector eventually resulting in a dull reflector. Inadvertently stained bulbs may be cleaned with a clean lint-free cloth, using alcohol or white spirits.
270 Self-help, vehicle care Dipped beam 1. Replace bulb through the opening in the front wheel arch: turn appropriate wheel to gain access, release catch and remove cover, see page 269. 2. Remove headlight protective cover. 3. Rotate left bulb holder and disengage. 4. Remove the bulb holder with bulb from the reflector.
Self-help, vehicle care 5. Detach bulb from bulb holder. Main beam 6. Insert new bulb into bulb holder, without touching the glass. 1. Open bonnet and engage support. 7. Insert new bulb so that the two lugs on the bulb holder engage in the recesses in the reflector. 8. Rotate bulb holder to right as far as it will go. 9. Place headlight protective cover in position and close. 10. Position cover on opening in wheel arch and engage. 2. Replace bulbs from engine compartment out.
272 Self-help, vehicle care 8. Engage spring wire clip, plug connector onto bulb. 9. Place headlight protective cover in position and close. After bulb replacement on the righthand side, re-attach air hose to air filter and engage. After bulb replacement on the lefthand side, reconnect the fusebox plug and engage. Parking lights 1. Open bonnet and engage support. 2. Replace bulbs from engine compartment out. To replace the bulb on the right-hand side, remove the air hose from the air filter.
Self-help, vehicle care 5. Remove bulb from socket. 6. Insert new bulb, without touching the glass. 7. Insert holder in reflector. Place headlight protective cap in position and close. After bulb replacement on the righthand side, re-attach air hose to air filter and engage. After bulb replacement on the left-hand side, reconnect the fusebox plug and engage.
274 Self-help, vehicle care 3. Rotate left bulb holder and disengage. 4. Remove the bulb holder with bulb from the reflector. 5. Detach bulb from bulb holder. 6. Insert new bulb into bulb holder, without touching the glass. 7. Insert new bulb so that the two lugs on the bulb holder engage in the recesses in the reflector. 8. Rotate bulb holder to right as far as it will go. 9. Place headlight protective cover in position and close. 10. Position cover on opening in wheel arch and engage.
Self-help, vehicle care Parking lights 1. Open bonnet and engage support. 2. Replace bulb through the opening in the front wheel arch: turn appropriate wheel to gain access, release catch and remove cover, see page 269. 3. Remove main beam headlight protective cover. 4. Remove parking light socket from reflector. 275 5. Remove bulb from socket. 6. Insert new bulb, without touching the glass. 7. Insert holder in reflector. Place headlight protective cap in position and close. 8.
276 Self-help, vehicle care 6. Insert light holder in reflector, rotate clockwise and engage in position. 7. Position cover on opening in wheel arch and engage. Side turn signal lights Have the bulb changed by a workshop. Fog lights 3 Have the bulb changed by a workshop. Front turn signal lights 1. Open bonnet and engage support. 2. Replace bulb through the opening in the front wheel arch: turn appropriate wheel to gain access, release catch and remove cover, see page 269. 3.
Self-help, vehicle care Tail lights 2. Detach plug connector from bulb holder. Hatch 5-door 1. To replace bulbs on the right side, use a coin to open the lock as indicated in the Fig. and fold the cover down. 3. Hold outside of bulb housing, loosen fastening nuts with wheel bolt wrench 3 and unscrew by hand. Wheel bolt wrench 3, see vehicle tools on page 251. To replace bulbs on the left side, use a coin to turn both locks (see Fig. 17261 T on page 262) and fold the cover down. 277 4.
278 Self-help, vehicle care 6. Remove bulb from socket. 7. Insert new bulb, without touching the glass. 8. Engage bulb holder in bulb housing, ensuring that it properly engages. Insert three screws with washers and tighten as far as possible. 5. Unscrew three screws using a screwdriver (vehicle tools, see page 251). Press locking tabs on outside of bulb holder inward and remove the bulb holder.
Self-help, vehicle care 279 11. Carry out the following steps to ensure proper function of the tail lights: – – – 9. Ensure that the seals are applied to the bulb holder and fixing screws. 10. Insert the bulb housing in the body, engaging the lug and the ball pin in the recesses. Tighten the fastening nuts using a wheel bolt wrench 3. Attach the plug connector. Close and engage the flap.
280 Self-help, vehicle care Hatch 3-door 1. To replace bulbs, fold the cover down. 2. Detach plug connector from bulb holder. 3. Hold outside of bulb housing, loosen fastening nuts with wheel bolt wrench 3 and unscrew by hand. Wheel bolt wrench 3, see vehicle tools on page 251. 4. Detach bulb housing towards the rear.
Self-help, vehicle care 281 6. Remove bulb from socket. 7. Insert new bulb, without touching the glass. 8. Engage bulb holder in bulb housing, ensuring that it properly engages. 5. Remove the round seal from the fastening bolt. Press the locking tabs on the outside of the bulb holder outward and remove the bulb holder.
282 Self-help, vehicle care 11. Carry out the following steps to ensure proper function of the tail lights: – – – 9. Ensure that the seals are applied to the bulb holder and fixing screws. 10. Insert the bulb housing in the body, engaging the lug and the ball pin in the recesses. Tighten the fastening nuts using a wheel bolt wrench 3. Attach the plug connector. Close and engage the flap.
Self-help, vehicle care Estate, Van 1. Disengage cover by pressing retaining lugs and remove. 2. Detach plug connector from bulb holder. 3. Hold the outside of the bulb housing, unscrew the three fastening nuts and remove the bulb housing rearwards. 283 4. Unscrew the three screws with a screwdriver (vehicle tools, see page 251) and remove the bulb holder.
284 Self-help, vehicle care 6. Insert new bulb without touching the glass. Insert bulb holder in bulb housing and screw in place. Insert bulb housing into body and tighten fastening nuts by hand. Attach plug connector. Close and lock cover. 7. Carry out the following steps to ensure proper function of the tail lights: – – – Bulbs in bulb carrier: 1 2 3 4 = = = = Reversing light/brake light Flasher Reversing light Fog tail light (country-specific version: fog tail light on left side only.
Self-help, vehicle care 2. Remove bulb housing from outside. Disengage plug by pressing on flap and remove from bulb holder. 3. Detach seal from bulb holder. 4. Disengage sockets by turning and remove. Press locking tabs on the long sides of the bulb holder outwards; lift bulb holder at front end (arrow) and remove. 285 Bulbs in bulb carrier: 1 2 3 = = = 4 5 = = Reversing light/brake light Reversing light Fog tail light (country-specific design: fog tail light on left-side only.
286 Self-help, vehicle care 5. Remove bulb from socket. 6. Insert new bulb, without touching the glass. 7. Insert bulb holder in bulb housing by first inserting the lug at the front of the plug. Fold together bulb holder, ensuring that it engages properly. Insert sockets and engage by turning. 8. Fit seal on bulb holder as illustrated. Ensure that the seal is flat in the area of the screws. 9. Engage plug. Insert light housing in body, ensuring proper positioning of the ball pins in the recesses.
Self-help, vehicle care 2. Remove bulb housing downward, taking care not to pull on the cable. 4. Rotate bulb socket anti-clockwise and disengage. 3. Lift flap and disconnect plug from bulb socket. 5. Remove bulb from socket. 6. Insert new bulb, without touching the glass. 7. Insert bulb holder into bulb housing and engage by turning it clockwise. 8. Connect plug to bulb socket. 9. Insert and engage bulb housing.
288 Self-help, vehicle care Rear courtesy lights 3, rear reading lights 3 Have the bulb changed by a workshop. Glove compartment lighting, luggage compartment lighting, footwell lighting 3 To ensure that no power is supplied to the lights, close the doors or hold the contact switch depressed before removing. 1. Prise the light out with a screwdriver. 2. Press bulb slightly towards spring clip and remove. 3. Insert new bulb, without touching the glass. 4. Insert light in opening and engage in position.
Self-help, vehicle care Vehicle care When caring for your vehicle, observe all national environmental regulations, particularly when washing it. Regular, thorough care helps to improve the appearance of your vehicle and maintain its value over the years. It is also prerequisite for warranty claims for any paint or corrosion damage. The following pages contain tips for vehicle care which, if used properly, will help combat the unavoidable, damaging effects of the environment.
290 Self-help, vehicle care Clean edges and folds on opened doors and flaps as well as the areas they cover. Thoroughly rinse off and leather-off the vehicle. Rinse leather frequently. Use separate leathers for paint and window surfaces: remnants of wax on the windows will impair vision. Observe national regulations.
Self-help, vehicle care Plastic and rubber parts For additional cleaning of plastic and rubber parts use Cleaner. Do not use any other agent, and in particular do not use solvents or petrol. Open Velcro fasteners on clothing could damage seat upholstery. Make sure Velcro fasteners are closed. Do not use high-pressure jet cleaners. Clean only with lukewarm water or Cleaner. Wheels and tyres Do not use high-pressure jet cleaners.
292 Self-help, vehicle care Engine compartment Areas of the engine compartment that are painted in the same colour as the vehicle must be looked after like any other painted surface. It is advisable to wash the engine compartment before and after winter and preserve it with wax. Cover alternator and brake fluid reservoir with plastic sheets before washing the engine.
Self-help, vehicle care Check the underbody after washing and have it waxed if necessary. Before the start of the cold weather season, check the PVC coating and protective wax coating. Have them restored to perfect condition if necessary. Caution – commercially available bitumen/ rubber materials can damage the PVC coating. We recommend that you have underbody work carried out by a workshop, who knows the prescribed materials and has experience in the use thereof.
294 Service, maintenance Service, maintenance Service, maintenance .......................... Inspection system ................................ Genuine Vauxhall Parts and Accessories ........................................ A note on safety .................................. Checking and topping up fluids ......... Engine oil .............................................. Diesel fuel filter .................................... Coolant ................................................. Brake fluid .......
Service, maintenance Royal Automobile Club (R.A.C.), R.A.C. Motoring Services Ltd.. 89-91 Pall Mall, LONDON, SW1Y 5HS General Motors Belgium N.V. Noordelaan 401 - Haven 500 2030 Antwerp – Belgium Tel. 00 32-34 50 63 29 The Customer Relations Department, Society of Motor Manufacturers and Traders Ltd. (S.M.M.T.), Forbes House, Halkin Street, LONDON, SW1X 7DS General Motors Southeast Europe org. složka Olbrachtova 9 140 00 Prague – Czech Republic Tel.
296 Service, maintenance General Motors Portugal Quinta da Fonte Edificío Fernão Magalhães, Piso 2 2780-190 Paço d’Arcos – Portugal Tel. 00 351- 21 440 75 00 The service interval display takes account of off-the-road periods during which the battery is disconnected. For vehicles with flexible engine oil change and service intervals, the length of these intervals is based on several parameters stemming from usage.
Service, maintenance Further information on maintenance and the inspection system can be found in the service booklet, which is in the glove compartment. Have service work – and repairs to the bodywork and components – performed properly by a workshop. We recommend your Vauxhall Authorised repairer, who has excellent knowledge of Vauxhall vehicles and is in possession of the necessary tools and current service instructions from Vauxhall.
298 Service, maintenance Never carry out any repairs or adjustment and maintenance work on the vehicle yourself. This especially applies to the engine, chassis and safety parts. You may unwittingly infringe the provisions of the law and, by not performing the work properly, endanger yourself and other road users. Checking and topping up fluids The caps that are used when topping up engine oil, coolant and wash fluid as well as the oil dipstick may be coloured yellow to aid identification.
Service, maintenance Checking the engine oil level, topping up engine oil The pictures show the inspection of a petrol and two diesel engines. The oil level must be checked with the vehicle on a level surface and with the engine (which must be at operating temperature) switched off. Wait at least 5 minutes before checking the level to allow the normal engine oil accumulation in the engine to drain into the oil pan.
300 Service, maintenance Diesel fuel filter Coolant On each engine oil change, have the fuel filter checked for any water residue by a workshop. The glycol-based coolant provides excellent corrosion protection for the heating and cooling systems as well as antifreeze protection down to around -28 °C. It remains in the cooling system throughout the year and need not be changed. Illumination of A indicates water in the fuel filter 3.
Service, maintenance 301 When the engine is at operating temperature, coolant level rises. It falls again when the system cools. If it falls below the KALT/COLD mark when the system is cold, top up to just above the mark. Top up antifreeze. If no antifreeze is available, top up with clean tap water. If tap water is unavailable, distilled water can be used. Antifreeze and corrosion protection Before the start of winter, have a workshop check the antifreeze protection.
302 Service, maintenance Coolant temperature Control indicator W illuminates when coolant temperature is too high. Check coolant level immediately: The use of certain brake fluids can cause damage or loss of braking power. We therefore recommend the use of highperformance brake fluid that has been approved. z Coolant level too low: Add coolant, see notes under "Antifreeze and corrosion protection", and "Coolant level". Have a workshop eliminate the cause of the coolant loss.
Service, maintenance Brake fluid change Brake fluid is hygroscopic, i.e. it absorbs water. If the brakes become hot, such as when driving on long downhill stretches, vapour bubbles can occur in the water, which can have an extremely adverse effect on braking power (depending on the proportion of water). The fluid change intervals specified in the Service Booklet must therefore be observed. 9 Warning Have the brake fluid change performed by a workshop.
304 Service, maintenance To ensure proper operation of the rain sensor 3 the sensor area must be free from dust, dirt and ice, which is why the windscreen wash system must be operated at regular intervals and the sensor area de-iced. Vehicles with rain sensor 3 can be identified by the sensor area near the top of the windscreen. Service setting for front windscreen wiper (e.g. for changing or cleaning the front wiper blades).
Service, maintenance 305 The windscreen wash system and headlight wash system will not freeze in winter: Frost protection down to -5 °C -10 °C -20 °C -30 °C Wiper blade on the rear window 3 Lift wiper arm. Disengage wiper blade as shown in Fig. 17318 T, and remove. Windscreen and headlight wash systems 3 The fluid reservoir filler neck for the windscreen wash system and headlight wash system 3 is located at the front, next to the left headlight. Capacities, see pages 346, 347.
306 Service, maintenance Parking the vehicle for more than 4 weeks can lead to battery discharging. This may reduce the service life of the battery. Disconnect battery from on-board power supply by disconnecting the negative terminal. The Vauxhall alarm system 3 siren must be deactivated as follows: switch the ignition on then off, disconnect the vehicle’s battery within 15 seconds. Ensure that ignition is switched off before connecting battery.
Service, maintenance Vehicle decommissioning Observe national regulations. If the vehicle is to be parked for several months, to avoid damage have the following work performed by a workshop. z Wash and preserve the vehicle, see page 289. z Check corrosion protection in engine compartment and on underbody and repair if necessary. z Clean and wax the rubber seals of the bonnet, doors and roof. Intermediate position of the Astra TwinTop roof for cleaning – see page 58. z Change engine oil, see page 300.
308 Technical data Technical data Vehicle documents, identification plate............................ Vehicle identification data.................. Coolant, brake fluid, oils ..................... Engine data.......................................... Performance......................................... Fuel consumption, CO2 emissions ...... Weights, payload and roof load ........ Tyres ..................................................... Electrical system .................................. Capacities ..
Technical data 309 Coolant, brake fluid, oils Only use approved fluids. Use of unsuitable fluids can cause serious damage to the vehicle. Engine oils Information on engine oils is found in the Service Booklet. Vehicle identification data The vehicle identification number is stamped on the identification plate in the vehicle floor, on the right-hand side under a cover between the driver’s door and seat. The vehicle identification number may be embossed on the instrument panel.
310 Technical data Engine data Sales designation Engine identifier code 1.4 Z 14 XEP 1.6 Z 16 XER 1.6 Z 16 LET 1.
Technical data Engine data Sales designation Engine identifier code 1.7 CDTI Z 17 DTH 1.9 CDTI Z 19 DT 1.9 CDTI Z 19 DTH 4 4 4 Piston displacement (cm ) 1686 1910 1910 Brake horse power (kW) at rpm 74 4400 88 3500 110 4000 Torque (Nm) at rpm 240 2300 280 2000 to 2750 320 2000 to 2750 Diesel Diesel Number of cylinders 3 Type of fuel Cetane requirement (CN) Diesel 1) 49 (D) 2) 49 (D) 2) 49 (D)2) Max. permissible engine speed, continuous operation (rpm) approx.
312 Technical data Performance (approx. mph / km/h), 5-door 1) Hatchback Z 14 XEP Z 16 XER Z 16 LET Z 18 XER Maximum speed Manual transmission Easytronic Automatic transmission 111/178 110/176 – 191 192 – 137/221 – – 129/208 – 117/188 Engine1) Z 20 LEH Z 17 DTH Z 19 DT Z 19 DTH Maximum speed2) Manual transmission Easytronic Automatic transmission 143/230 – – 112/180 – – 121/194 – 117/188 129/2083) – – Engine 2) 1) 2) 3) Sales designation, see pages 310 and 311.
Technical data Performance (approx. mph / km/h), 3-door 1) Hatchback Z 14 XEP Z 16 XER Z 16 LET Z 18 XER Maximum speed Manual transmission Easytronic Automatic transmission 112/180 111/178 – 120/193 121/194 – 139/223 – – 130/210 – 118/190 Engine2) Z 20 LEH Z 17 DTH Z 19 DT Z 19 DTH Maximum speed2) Manual transmission Easytronic Automatic transmission 152/244 – – 113/182 – – 122/196 – 118/190 130/2103) – – Engine 2) 1) 2) 3) Sales designation, see pages 310 and 311.
314 Technical data Performance (approx. mph / km/h), Estate 1) Z 14 XEP Z 16 XER Z 16 LET Z 18 XER Maximum speed Manual transmission Easytronic Automatic transmission 111/178 – – 119/191 119/192 – 137/221 – – 129/207 – 117/188 Engine1) Z 17 DTH Z 19 DT Z 19 DTH Maximum speed2) Manual transmission Easytronic Automatic transmission 112/180 – – 120/193 – 116/187 129/2073) – – Engine 2) 1) 2) 3) Sales designation, see pages 310 and 311.
Technical data Performance (approx. mph / km/h), Engine Van 1) Z 14 XEP Z 16 XER Z 17 DTH Z 19 DT Z 19 DTH 111/178 – – 119/191 119/192 – 112/180 – – 120/193 – 116/187 129/207 – – Z 16 XER Z 16 LET Z 18 XER Z 19 DTH 119/192 120/193 – 142/228 – – 129/209 – 117/189 132/213 – – 2) Maximum speed Manual transmission Easytronic Automatic transmission Performance (approx.
316 Technical data Fuel consumption, CO2 emissions Directive 80/1268/EEC (last modified by 2004/3/EC) has applied for the measurement of fuel consumption since 1996. The directive is oriented to actual driving practices: Urban driving is rated at approx. 1/3 and off-road driving with approx. 2/3 (urban and extra-urban consumption). Cold starts and acceleration phases are also taken into consideration. The specification of CO2 emission is also a constituent of the directive.
Technical data Fuel consumption (approx. l/100 km), CO2 emissions (approx. g/km), Hatch 5-door (up to tyre width of 205 mm1)) Engine2) Z 14 XEP Z 16 XER Z 18 XER Z 17 DTH Manual transmission/Easytronic/Automatic transmission urban extra-urban total CO2 8.0/ 7.7/– 5.0/ 4.9/– 6.1/ 5.9/– 146/ 142/– 8.7/ 8.5/– 5.2/ 5.0/– 6.5/ 6.3/– 156/ 151/– 9.9/–/10.5 5.8/–/ 6.2 7.3/–/ 7.8 175/–/ 187 6.4/–/– 4.2/–/– 5.0/–/– 135/–/– 1) 2) On engine Z 17 DTH with Easytronic up to tyre width 195 mm.
318 Technical data Fuel consumption (approx. l/100 km), CO2 emissions (approx. g/km), Hatch 5-door (up to tyre width of 225 mm1)) Engine2) Z 14 XEP Z 16 XER Z 16 LET Z 18 XER Manual transmission/Easytronic/Automatic transmission urban extra-urban total CO2 8.2/ 7.9/– 5.2/ 5.1/– 6.3/ 6.1/– 151/ 146/– 8.9/ 8.7/– 5.4/ 5.2/– 6.7/ 6.5/– 161/ 156/– 10.3/–/– 6.2/–/– 7.7/–/– 185/–/– 10.1/–/10.7 6.0/–/ 6.4 7.5/–/ 8.
Technical data Fuel consumption (approx. l/100 km), CO2 emissions (approx. g/km), Hatch 3-door (up to tyre width of 205 mm1)) Engine2) Z 14 XEP Z 16 XER Z 18 XER Z 17 DTH Manual transmission/Easytronic/Automatic transmission urban extra-urban total CO2 8.0/ 7.7/– 5.0/ 4.9/– 6.1/ 5.9/– 146/ 142/– 8.7/ 8.5/– 5.2/ 5.0/– 6.5/ 6.3/– 156/ 151/– 9.9/–/10.4 5.8/–/ 6.1 7.3/–/ 7.7 175/–/ 185 6.4/–/– 4.2/–/– 5.0/–/– 135/–/– 1) 2) For Z 17 DTH engine - tyre width up to 195 mm.
320 Technical data Fuel consumption (approx. l/100 km), CO2 emissions (approx. g/km), Hatch 3-door (up to tyre width of 225 mm1)) Engine2) Z 14 XEP Z 16 XER Z 16 LET Z 18 XER Manual transmission/Easytronic/Automatic transmission urban extra-urban total CO2 8.2/ 7.9/– 5.2/ 5.1/– 6.3/ 6.1/– 151/ 146/– 8.9/ 8.7/– 5.4/ 5.2/– 6.7/ 6.5/– 161/ 156/– 10.3/–/– 6.2/–/– 7.7/–/– 185/–/– 10.1/–/10.6 6.0/–/ 6.3 7.5/–/ 7.
Technical data Fuel consumption (approx. l/100 km), CO2 emissions (approx. g/km), Estate (up to tyre width of 205 mm1)) Engine2) Z 14 XEP Z 16 XER Z 18 XER Z 17 DTH Manual transmission/Easytronic/Automatic transmission urban extra-urban total CO2 8.0/–/– 5.0/–/– 6.1/–/– 146/–/– 8.8/ 8.6/– 5.3/ 5.1/– 6.6/ 6.4/– 158/ 154/– 10.0/–/10.5 5.9/–/ 6.2 7.4/–/ 7.8 178/–/ 187 6.4/–/– 4.2/–/– 5.0/–/– 135/–/– 1) 2) For Z 17 DTH engine - tyre width up to 195 mm. Sales designation, see pages 310 and 311.
322 Technical data Fuel consumption (approx. l/100 km), CO2 emissions (approx. g/km), Estate (up to tyre width of 225 mm) Engine1) Z 14 XEP Z 16 XER Z 16 LET Z 18 XER Manual transmission/Easytronic/Automatic transmission urban extra-urban total CO2 8.2/–/– 5.2/–/– 6.3/–/– 151/–/– 9.0/ 8.8/– 5.5/ 5.3/– 6.8/ 6.6/– 163/ 158/– 10.3/–/– 6.2/–/– 7.7/–/– 185/–/– 10.2/–/10.7 6.1/–/ 6.4 7.6/–/ 8.
Technical data Fuel consumption (approx. l/100 km), CO2 emissions (approx. g/km), Van (up to tyre width of 205 mm1)) Engine2) Z 14 XEP Z 16 XER Z 17 DTH Manual transmission/Easytronic/Automatic transmission urban extra-urban total CO2 8.0/–/– 5.0/–/– 6.1/–/– 146/–/– 8.8/ 8.6/– 5.3/ 5.1/– 6.6/ 6.4/– 158/ 154/– 6.4/–/– 4.2/–/– 5.0/–/– 135/–/– 1) 2) For Z 17 DTH engine - tyre width up to 195 mm. Sales designation, see pages 310 and 311.
324 Technical data Fuel consumption (approx. l/100 km), CO2 emissions (approx. g/km), Van (up to tyre width of 225 mm) Engine1) Z 14 XEP Z 16 XER Z 17 DTH Z 19 DT Z 19 DTH Manual transmission/Easytronic/Automatic transmission urban extra-urban total CO2 8.2/–/– 5.2/–/– 6.3/–/– 151/–/– 9.0/ 8.8/– 5.5/ 5.3/– 6.8/ 6.6/– 163/ 158/– 6.5/–/– 4.3/–/– 5.1/–/– 138/–/– 7.4/–/ 9.7 4.9/–/ 5.4 5.8/–/ 7.0 157/–/ 189 7.4/–/– 4.9/–/– 5.8/–/– 157/–/– Fuel consumption (approx. l/100 km), CO2 emissions (approx.
Technical data Weights, payload and roof load The payload is the difference between the permitted gross vehicle weight (see identification plate, page 308) and the EC kerbweight. To calculate the kerbweight, enter the data for your vehicle below: z kerbweight from table 1, page 327 + .............. kg z Additional weight for equipment versions from table 2, page 334 + .............. kg z Weight of heavy accessories from table 3, page 337 + .............. kg Total = .............. kg is the EC kerbweight.
326 Technical data Table 1, kerbweight in kg1), Hatch 5-door Model Engine2) Manual transmission Easytronic Automatic transmission Astra Z 14 XEP 1240 1240 – Z 16 XER 1270 1270 – Z 18 XER 1278 – 1303 Z 17 DTH 1365 – – Z 19 DT 1395 – 1425 Z 19 DTH 1393 – – 1) 2) According to EC Directive, including assumed weights for driver (68 kg), luggage (7 kg) and all fluids (tank 90% full). Sales designation, see pages 310 and 311.
Technical data 327 Table 1, kerbweight in kg1), Hatch 5-door Model Engine2) Manual transmission Easytronic Automatic transmission – Astra with air Z 14 XEP conditioning system Z 16 XER or climate control system Z 16 LET 1260 1260 1290 1290 1355 – – Z 18 XER 1298 – 1323 Z 17 DTH 1380 – – Z 19 DT 1410 – 1440 Z 19 DTH 1408 – – 1) 2) According to EC Directive, including assumed weights for driver (68 kg), luggage (7 kg) and all fluids (tank 90% full).
328 Technical data Table 1, kerbweight in kg1), Hatch 3-door Model Engine2) Astra Z 14 XEP 1220 1220 – Z 16 XER 1250 1250 – Z 18 XER 1265 – 1278 Z 17 DTH 1345 – – Z 19 DT 1375 – 1393 Z 19 DTH 1390 – – 1) 2) Manual transmission Easytronic According to EC Directive, including assumed weights for driver (68 kg), luggage (7 kg) and all fluids (tank 90% full). Sales designation, see pages 310 and 311.
Technical data 329 Table 1, kerbweight in kg1), Hatch 3-door Model Engine2) Manual transmission Easytronic Automatic transmission Astra with air Z 14 XEP conditioning system Z 16 XER or climate control system Z 16 LET 1240 1240 – 1270 1270 – 1335 – – Z 18 XER 1285 – 1298 Z 20 LEH 1393 – – Z 17 DTH 1360 – – Z 19 DT 1390 – 1408 Z 19 DTH 1405 – – 1) 2) According to EC Directive, including assumed weights for driver (68 kg), luggage (7 kg) and all fluids (tank 90% full).
330 Technical data Table 1, kerbweight in kg1), Estate Model Engine2) Manual transmission Easytronic Automatic transmission Astra Z 14 XEP 1278 – – Z 16 XER 1315 1315 – Z 18 XER 1325 – 1350 Z 17 DTH 1393 – – Z 19 DT 1435 – 1465 Z 19 DTH 1450 – – 1) 2) According to EC Directive, including assumed weights for driver (68 kg), luggage (7 kg) and all fluids (tank 90% full). Sales designation, see pages 310 and 311.
Technical data 331 Table 1, kerbweight in kg1), Estate Model Engine2) Manual transmission Easytronic Automatic transmission 1298 – – Astra with air Z 14 XEP conditioning system Z 16 XER or climate control system Z 16 LET 1335 1335 – 1395 – – Z 18 XER 1345 – 1370 Z 17 DTH 1408 – – Z 19 DT 1450 – 1480 Z 19 DTH 1465 – – 1) 2) According to EC Directive, including assumed weights for driver (68 kg), luggage (7 kg) and all fluids (tank 90% full).
332 Technical data Table 1, kerbweight in kg1), Van Model Engine2) Astra Z 14 XEP 1235 – – Z 16 XER 1270 1270 – Z 17 DTH 1365 – – Z 19 DT 1385 – 1420 Z 19 DTH 1395 – – Astra with air Z 14 XEP conditioning system Z 16 XER or climate control system Z 17 DTH 1250 – – 1285 1285 – 1380 – – 1) 2) Manual transmission Easytronic Automatic transmission Z 19 DT 1400 – 1435 Z 19 DTH 1410 – – According to EC Directive, including assumed weights for driver (68 kg), luggage
Technical data 333 Table 1, kerbweight in kg1), TwinTop Model Engine2) Manual transmission Easytronic Automatic transmission Astra Z 16 XER 1495 1495 – Z 18 XER 1500 – 1503 Z 19 DTH 1613 – – Z 16 XER 1515 1515 Z 16 LET 1575 – – Z 18 XER 1520 – 1523 Z 19 DTH 1628 – – Astra with air conditioning system or climate control system 1) 2) According to EC Directive, including assumed weights for driver (68 kg), luggage (7 kg) and all fluids (tank 90% full).
334 Technical data Table 2, additional weight for equipment versions in kg Hatch Engine1) Z 14 XEP Z 16 XER Z 16 LET Z 18 XER – – – – Club / Breeze 2.9 2.9 2.9 2.9 Design / Elite 12 12 12 12 SRi / Sxi 24.5 24.5 24.5 24.5 VXR2) – – – – Z 20 LEH Z 17 DTH Z 19 DT Z 19 DTH – – – – Club / Breeze – 2.9 2.9 2.9 Design / Elite – 12 12 12 Express / Life 2) Engine1) Express / Life 2) SRi / Sxi – 24.5 12.6 12.
Technical data Table 2, additional weight for equipment versions in kg Estate Engine1) Z 14 XEP Z 16 XER Z 16 LET Z 18 XER – – – – Club / Breeze 2.9 2.9 2.9 2.9 Design / Elite 12 12 12 12 SRi / Sxi 24.5 24.5 24.5 24.5 VXR2) – – – – Z 17 DTH Z 19 DT Z 19 DTH – – – Club / Breeze 2.9 2.9 2.9 Design / Elite 12 12 12 SRi / Sxi 24.5 12.6 24.5 VXR2) – – – Express / Life 2) Engine1) Express / Life 1) 2) 2) Sales designation, see pages 310 and 311.
336 Technical data Table 2, additional weight for equipment versions in kg Van Engine1) Express / Life 2) Z 14 XEP Z 16 XER Z 17 DTH Z 19 DT Z 19 DTH – – – – – Club / Breeze – – – – – Design / Elite – – – – – Sport 19.3 10.5 10.5 10.5 10.
Technical data Tyres Not all tyres available on the market currently meet the structural requirements. We recommend that you consult a Vauxhall Authorised repairer concerning suitable tyre makes. These tyres have undergone special tests to establish their reliability, safety and specific suitability for Vauxhall vehicles. Despite continuous market monitoring, we are unable to assess these attributes for other tyres, even if they have been granted approval by the relevant authorities or in some other form.
338 Technical data (ctd.) Tyre pressure in bar / psi1) Engine2) Tyres Front Rear Front Rear Front Rear Z 14 XEP 185/65 R 15, 195/60 R 15 2.3/33 2.1/30 – – 2.5/36 2.9/42 195/65 R 15, 205/55 R 16 2.0/29 2.0/29 2.5/36 2.5/36 2.1/30 2.5/36 185/65 R 15, 195/60 R 15, 215/45 R 17, 225/40 R 18 2.3/33 2.1/30 – – 2.5/36 2.9/42 195/65 R 15, 205/55 R 16, 225/45 R 17 2.0/29 2.0/29 2.5/36 2.5/36 2.1/30 2.5/36 205/55 R 16, 225/45 R 17 2.3/33 2.1/30 2.7/39 2.5/36 2.5/36 2.
Technical data (ctd.) Tyre pressure in bar / psi1) 1) 1 bar corresponds to 100 kPa / 14.5 psi. Hatch 339 Tyre pressure Tyre pressure for Tyre pressure for load of up to ECO1) loaded with full load up to 3 people 3 persons Engine2) Tyres Front Rear Front Rear Front Rear Z 18 XER 185/65 R 15, 195/60 R 15, 215/45 R 17, 225/40 R 18 2.3/33 2.1/30 – – 2.5/36 2.9/42 195/65 R 15, 205/55 R 16 2.0/29 2.0/29 2.5/36 2.5/36 2.1/30 2.5/36 225/45 R 17 2.3/33 2.1/30 2.7/39 2.5/36 2.
340 Technical data (ctd.) Tyre pressure in bar / psi1) Hatch Engine2) Tyres Front Rear Front Rear Front Rear Z 17 DTH 195/65 R 15, 205/55 R 16, 225/45 R 17 2.1/30 2.1/30 2.5/36 2.5/36 2.5/36 2.9/42 215/45 R 17, 225/40 R 18 2.5/36 2.3/33 – – 2.6/38 3.0/44 205/55 R 16, 225/45 R 17 2.3/33 2.1/30 2.7/39 2.5/36 2.5/36 2.9/42 215/45 R 17, 225/40 R 18 2.7/39 2.5/36 – – 2.8/41 3.1/45 4.2/61 T 115/70 R 16 (temporary spare)3) 4.2/61 – – 4.2/61 4.
Technical data (ctd.) Tyre pressure in bar / psi1) Estate Tyres Front Rear Front Rear Front Rear Z 14 XEP 195/65 R 15, 205/55 R 16 2.0/29 2.0/29 2.5/36 2.5/36 2.1/30 2.6/38 185/65 R 15, 195/60 R 15 2.3/33 2.1/30 – – 2.5/36 2.9/42 195/65 R 15, 205/55 R 16, 225/45 R 17 2.0/29 2.0/29 2.5/36 2.5/36 2.1/30 2.6/38 185/65 R 15, 195/60 R 15, 215/45 R 17, 225/40 R 18 2.3/33 2.1/30 – – 2.5/36 2.9/42 205/55 R 16, 225/45 R 17 2.3/33 2.1/30 2.7/39 2.5/36 2.5/36 2.
342 Technical data (ctd.) Tyre pressure in bar / psi1) Estate Engine2) Tyres Front Rear Front Rear Front Rear Z 18 XER 195/65 R 15, 205/55 R 16, 225/45 R 17 2.0/29 2.0/29 2.5/36 2.5/36 2.1/30 2.6/38 185/65 R 15, 195/60 R 15, 215/45 R 17, 225/40 R 18 2.3/33 2.1/30 – – 2.5/36 2.9/42 195/65 R 153), 205/55 R 16, 225/45 R 17 2.1/30 2.1/30 2.5/36 2.5/36 2.5/36 2.9/42 215/45 R 17, 225/40 R 18 2.5/36 2.3/33 – – 2.6/38 3.0/44 205/55 R 16, 225/45 R 17 2.3/33 2.1/30 2.
Technical data (ctd.) Van Tyre pressure Tyre pressure for Tyre pressure for load of up to ECO1) loaded with full load up to 2 people 3 persons Tyre pressure in bar / psi1) Engine2) Tyres Front Rear Front Rear Front Rear Z 14 XEP 195/65 R 15, 205/55 R 16 2.0/29 2.0/29 2.5/36 2.5/36 2.1/30 2.6/38 185/65 R 15, 195/60 R 15 2.3/33 2.1/30 – – 2.5/36 2.9/42 195/65 R 15, 205/55 R 16, 225/45 R 17 2.1/30 2.1/30 2.5/36 2.5/36 2.5/36 2.9/42 215/45 R 17, 225/40 R 18 2.5/36 2.
344 Technical data (ctd.) Tyre pressure in bar / psi1) TwinTop Engine2) Tyres Front Rear Front Rear Front Rear Z 16 XER, Z 18 XER 205/55 R 16, 225/45 R 17 2.1/30 2.1/30 2.5/36 2.5/36 2.2/32 2.6/38 225/40 R 18 2.3/33 2.1/30 – – 2.4/35 2.8/41 205/55 R 16, 225/45 R 17 2.3/33 2.1/30 – – 2.4/35 2.8/41 225/40 R 18 2.5/36 2.3/33 – – 2.6/38 3.0/44 205/55 R 16, 225/45 R 17 2.3/33 2.1/30 – – 2.4/35 2.8/41 225/40 R 18 2.5/36 2.3/33 – – 2.6/38 3.0/44 4.
Technical data 345 Electrical system Battery Voltage 12 Volt Amp hours 36 Ah / 44 Ah 3 / 55 Ah 3 / 60 Ah 3 / 66 Ah 3 / 70 Ah 3 / 72 Ah 3 Battery for remote control of central locking system and electronic key of Open&Start system CR 20 32
346 Technical data Capacities (approx. litres) Engine1) Z 14 XEP Z 16 XER Z 16 LET Z 18 XER Fuel tank (nominal content) 52 52 52 52 Engine oil with filter change between MIN and MAX on oil dipstick 3.5 1.0 4.5 1.0 4.5 1.0 4.5 1.0 Container for windscreen wash system with headlight wash system 2.4 4.0 2.4 4.0 2.4 4.0 2.4 4.0 Engine1) Z 17 DTH Z 19 DT Z 19 DTH Fuel tank (nominal content) 52 52 52 Engine oil with filter change between MIN and MAX on oil dipstick 5.0 1.0 4.3 1.
Technical data Dimensions (approx. mm) Hatch 5-door Hatch 3-door Estate Van TwinTop Overall length 4249 4290 4515 4515 4476 Width 1753 1753 1753 1753 1759 Width with two exterior mirrors 2032 2032 2032 2032 2021 1) 1460 1435 1500 1500 1411 Length of luggage compartment floor 819 819 1085 1825 805 Luggage compartment width 944 944 1088 1103 734 Height of luggage compartment opening 614 555 766 775 – Wheelbase 2614 2614 2703 2703 2614 11.20 11.20 11.
348 Technical data Installation dimensions of trailer towing equipment with detachable coupling ball bar, Hatch1) All dimensions refer to factory-fitted towing equipment. Dimension mm A 342.9 B 83 C 513.4 D 488.6 E 211.4 F 94.3 G 160 9 Warning Only use towing equipment approved for your vehicle. We recommend entrusting fitting of towing equipment at a later date to a workshop. 1) Do not mount towing equipment to vehicles with Z 20 LEH engine. Sales designation, see page 310.
Technical data Installation dimensions of trailer towing equipment with detachable coupling ball bar, Estate, Van All dimensions refer to factory-fitted towing equipment. Dimension mm A 84.0 B 570.0 C 515.0 D 93.5 E 173.0 F 307.6 G 158.0 H 292.6 9 Warning Only use towing equipment approved for your vehicle. We recommend entrusting fitting of towing equipment at a later date to a workshop.
350 Technical data Installation dimensions of towing equipment with detachable coupling ball bar, Astra TwinTop All measurements refer to Vauxhallapproved towing equipment. Dimension mm A 68.8 B 570.0 C 515.0 D 485.0 E 93.5 F 288.0 G 245.0 9 Warning Only use towing equipment approved for your vehicle. We recommend entrusting fitting of towing equipment at a later date to a workshop.
Technical data 351
352 Index Index A ABS (Anti-lock Brake System) ............... 224 Accessories....................................... 90, 247 Accessory socket ................................... 107 ActiveSelect.............................................. 16 Adaptive Forward Lighting (AFL) .. 26, 147 Bulb replacement............................... 273 Driving abroad................................... 150 Air conditioning system................. 154, 161 Air intake ................................................
Index Clutch operation .................................... 199 CO2 emissions........................................ 316 Cold start................................................ 199 Colour information display .. 122, 130, 134 Continuous Damping Control (CDC) ............................... 115, 211 Contrast.................................................. 133 Control indicators .................... 10, 112, 113 ABS (Anti-lock Brake System) ........... 225 Adaptive Forward Lighting (AFL) ...
354 Index Exhaust control indicator ...................... 206 Exhaust gases ........................................ 207 Exhaust system ...................................... 207 Exterior lights ................................. 116, 143 Exterior mirrors............................. 6, 49, 157 F Fan.................................................. 158, 297 Filling station Capacities........................................... 346 Engine oil level ................................... 298 Fuel ............
Index Instrument illumination ......................... 148 Bulb replacement............................... 288 Instrument panel ....................................... 7 Instruments ............................................ 112 Interactive Driving System (IDS+) . 209, 211 Interior mirror ....................................... 5, 51 Interruption of power supply ........ 136, 139 Easytronic ........................................... 183 Selector lever lock ...................... 189, 197 ISOFIX ........
356 Index Performance........................................... 316 Petrol .............................................. 202, 310 Pinking .................................................... 202 Pollen filter ............................................. 174 Power assisted steering, see electro-hydraulic power assisted steering .................................. 198 Preheating........................................ 17, 118 Preheating switch .................................... 17 Pushing, towing ......
Index Tank Fuel gauge ......................................... 119 Technical data ....................................... 308 Telephone, see Mobile telephone ........ 152 Temperature regulation................ 158, 170 Temporary spare wheel ................ 232, 250 Tightening torque.......................... 255, 337 Tilt angle Seats ................................................. 4, 65 Time ................................................ 124, 127 Tools .................................................
358 Index Winter mode Starting-off aid .................................. 180 Winter operation Battery ................................................ 199 Coolant, antifreeze ............................ 301 Fuel consumption .............................. 201 Fuel for diesel engines....................... 202 Heating.............................. 154, 163, 167 Locks ................................................... 291 Tyre chains .................................
Owner’s Manual ASTRA Operation, Safety and Maintenance Reproduction or translation, in whole or in parts, is not permitted without prior written consent from Vauxhall Motors Ltd. All rights as understood under the copyright laws are explicitly reserved by Vauxhall Motors Ltd. All information, illustrations and specifications contained in this manual are based on the latest production information available at the time of publication. The right is reserved to make changes at any time without notice.