Owner`s manual

141Instruments, controls
Windscreen wiper
To activate, move stalk up lightly.
The stalk always moves back to starting
position. Shift to next higher or lower level:
move stalk slightly.
Move stalk past resistance point and hold:
the windscreen wiper stages are run
through; an acoustic signal sounds at
position §.
Move stalk down from position §: Single
swipe.
Adjustable timed interval wipe 3
Adjust wiper interval to a value between
2 and 15 seconds: switch ignition on, move
stalk downwards from position §, wait for
required interval time and move stalk to
interval wiping $.
The interval time selected remains stored
until it is next changed or until the ignition
is turned off.
After turning on the ignition and setting the
stalk to $, the interval is set to 6 seconds.
Automatic wiping with rain sensor 3:
To activate, move stalk up lightly.
The rain sensor detects the amount of
water on the screen and automatically
controls the wiper.
Keep the rain sensor detection field clear
by activating the screen wash system.
§ =Off
$ = Timed interval wipe
% =Slow
& =Fast
$ = Automatic wiping with rain sensor
§ =Off