Owner`s manual

189Driving and operation
The transmission no longer shifts
automatically. Vehicle can continue to be
driven. Second gear is not available.
Forward gears 1, 3 and 4 must be shifted
manually using selector lever:
Interruption of power supply
If the vehicle battery is flat, the selector
lever cannot be moved out of position P.
If the battery is flat, start the vehicle using
jump leads, see page 243.
If the battery is not the cause of the fault,
release selector lever:
1. Apply handbrake.
2. Release selector lever trim from centre
console at rear, fold upwards and rotate
to the left.
3. Push the yellow catch forward with a
screwdriver and move the selector lever
out of P.
4. Mount selector lever trim on centre
console and refit.
Reselecting P causes locking again. Have a
workshop eliminate the cause of the power
loss.
1 = 1st gear
2 =3rd gear
3, D =4th gear