Owner`s manual

220 Driving and operation
Once the ignition is switched on, the system
is operational and will continuously
monitor the tyre pressures at speeds of
approx. 20 mph (30 km/h) and above.
Tyre pressure, see pages 227, 337.
Display of current tyre pressure
Select menu item Tyres from the Board
Computer menu.
The current pressure of each tyre is
displayed.
Warning messages
A message is given on the information
display to warn of inconsistent tyre
pressures. In some versions, the message is
displayed in abbreviated form.
For example, the following messages can
be displayed:
A graphic indicating the left rear tyre is
shown together with the current tyre
pressure: Slight pressure deviation, reduce
speed. Check pressure at next opportunity
with appropriate gauge and correct if
necessary.
On the colour information display this
report will appear in yellow.
9 Warning
The tyre pressure monitoring system does
not replace manual checks with a
suitable gauge.
Check tyre pressures at least every
14 days and prior to any long journey;
the tyres should be checked when cold.
Don’t forget to check the spare 3.
2 Board Computer
BC 1
BC 2
Timer
Tyres
Navi active
Tyre pressure
OK
check rear
left
(value in bar)