Owner`s manual

277Self-help, vehicle care
Tail lights
Hatch 5-door
1. To replace bulbs on the right side, use a
coin to open the lock as indicated in the
Fig. and fold the cover down.
To replace bulbs on the left side, use a
coin to turn both locks (see Fig. 17261 T
on page 262) and fold the cover down.
2. Detach plug connector from bulb holder.
3. Hold outside of bulb housing, loosen
fastening nuts with wheel bolt wrench 3
and unscrew by hand. Wheel bolt
wrench 3, see vehicle tools on page 251.
4. Detach bulb housing towards the rear.