Owner`s manual

Self-help, vehicle care 13 5
7. Screw the filler hose to the tyre valve.
8.The switch on the compressor must be
set to §.
9. Connect the compressor plug to the
accessory socket or cigarette lighter
socket. Accessory socket – see page 58.
10.Switch on ignition.
11.S et the rocker switch on the compressor
to I. The tyre is filled with sealant.
12.While the sealant bottle drains (approx.
30 seconds) the pressure indicator on
the compressor briefly points to 6 bar
(87 psi). Pressure then sinks again.
13.All of the sealant is pumped into the
tyre and then the tyre is filled with a ir.
14.The prescribed tyre pressure
(see page 169) should be reached
within 10 minutes. Switch off the
compressor when the correct pressure is
obtained.
If the prescribed tyre pressure is not
reached within 10 minutes, detach the tyre
repair kit. Move the vehicle one tyre
revolution (approx. 2 metres) in a straight
line. Reconnect the tyre repair kit and
continue the filling procedure for
10 minutes. If the prescribed tyre pressure
is still not reached, the tyre is too badly
damaged. Park the vehicle and consult a
workshop.
9 Wa rning
Do not allow the sealant to contact skin,
eyes or clothing. If swallowed, seek
medical assistance immediately.
9 Wa rnin g
Do not run the compressor for more than
10 minutes - see "Important information"
on page 136.