Owner`s manual

Self-help, vehicle care136
Reduce excess tyre pressure with the
button above the pressure indicator.
15. Detach the tyre repair kit. Screw the
filler hose to the free connection on the
sealant bottle. This prevents sealant
leakage. Stow the tyre repair kit in the
vehicle.
16. Wipe away any sealant spill with a
cloth.
17. Disma ntle and stow the warning
triangle 3.
18. The stick er supp lie d in the kit shows the
maximum permitted speed at which the
tyre repair may be used. Apply sticker in
the driver’s field of vision.
19.Continue driving immediately to allow
the sealant to distribute evenly
throughout the tyre. Stop after approx.
6 miles (10 km), but no more than
10 minutes, and c heck tyre pressure.
Screw the compressor air hose directly
onto the tyre valve.
As long as the tyre pressure is m ore
than 3.1 bar (45 psi), adjust to the
prescribed value. Repeat the procedure
until there is no more pressure loss.
If tyre pressure is below 3.1 bar (45 psi),
the vehicle must not be driven. Consult
a workshop.
20.Stow the tyre repair kit under the front
seat.
Importa nt informa tion
If the compressor makes abnormal noises
or heats up greatly, switch it off for at least
30 minutes.
Protect the compressor from moisture and
rain.
The seala nt can only be stored for approx.
4 years. After this time, the sealing
properties can no longer be guaranteed.
Heed the expiration date on the sealant
bottle.
The sealant bottle can only be used once.
Replace a used sealant bottle.
The compressor and sealant can be used
from approx. -30 °C.
Dispose of a used tyre repair kit in
accordance with applicable legisla tion.
9 Wa rnin g
Do not drive faster than
50 mph (80 km/h). Have the tyre
permanently repaired or replaced before
subjecting it to prolonged usage.
Have the repaired tyre replaced as soon
as possible. Do not drive with more than
one repaired tyre.
Steerability and driving behaviour may
be impaired. Take bends slowly.