Owner`s manual

Self-help, vehicle care 13 9
Bulb replacement
Before replacing a bulb, turn off the
respective light switch.
Only hold new bulb at base! O il a nd gre ase
stains on the glass evaporate, eventually
resulting in a dull reflector. Inadvertently
stained bulbs may be c leaned with a clean,
non-fluffy cloth, using alcohol or white
spirit.
Replacem ent bulb m ust be in accordance
with data on base of defective bulb. Do not
exceed wattage given on bulb base.
Headlight aiming
We recommend that headlight a im ing be
carried out by a workshop, who will have
special equipment.
On vehicles with headlight range
adjustm ent, carry out headlight aiming
with switch in position 0.
Hea dlight dipped and main beam
1. Remove harness connector.
2. Remove rub ber s ea l.
3. Release retaining clip and remove bulb.
4. Renew bulb and install retaining clip
ensuring that bulb is in correct
orientation.
5. Install rubber seal and harness
connector.
Parking lig ht
1. Remove bulb holder from light assemb ly
by rotating through 90º.
2. Renew bulb.
3. Install bulb holder in light assembly.