Owner`s manual

Self-help, vehicle care 14 1
3. Twist bulb holder to separate from light
assembly.
4. Renew bulb.
5. Push to install the bulb holder into the
light assembly - then twist to secure.
6. Check that the wiring harness is located
correctly.
7. Locate light assembly into position,
ensuring that it is seated correctly.
8. Fit light assembly onto retaining pins
and replace 3 screws.
Reversi ng lights and fog tai l light
1. Remove 2 screws (using the tool supplied
in the tool kit) a nd remove light
assembly.
2. Twist bulb housing to sep arate from light
assembly.
3. Renew bulb.
4. Push to install the bulb holder into the
light assembly - then twist to secure.
5. Install light assembly with 2 screws.
Number plat e light
1. Remove 2 screws (arrowed) and remove
lens.
2. Renew bulb.
3. Re-install lens; replace screws.