Owner`s manual

Lighting 77
Main beam, headlight flash
To change between dip ped and main
beam, pull the stalk towards the steering
wheel, then release when a click is felt.
Pulling the stalk towards the steering wheel
to the first stop operates the headlight
flash.
The control indicator P in the instrument
cluster is illuminated in blue when the main
beam or headlight flash is on.
Automatic dipped beam
activation 3
Dipped beam switches on or off
automatically when the engine is running
based on the outside light conditions.
The exterior lights switch off when the
ignition is switched off.
To activate:
1. Switch on the ignition,
2. turn light switch to 0 and return to 7,
3. rep eat stage 2 within approx. 5 seconds,
4. a double acoustic signal sounds for
confirm ation.
To deactivate:
1. Switch on the ignition,
2. turn light switch to 0 and return to 7,
3. repeat stage 2 within approx. 5 seconds,
4. an acoustic signal sounds for
confirmation.
For reasons of safety it is a dvisable to have
the automatic dipped beam function
activated.
During poor lighting conditions e.g. fog or
mist, manually switch on the dipped beam.