Owner's Manual

Vehicle care 121
Headlights
Low beam and high beam
1. Remove harness connector.
2.
Remove rubber seal.
3. Release retaining clip and remove
bulb.
4. Renew bulb and install retaining
clip ensuring that bulb is in correct
orientation.
5. Install rubber seal and harness
connector.
Sidelights
1. Remove
bulb holder from reflector
housing by rotating through 90°.
2. Renew bulb.
3. Install bulb holder in reflector
housing.
Fog lights
Have bulbs replaced by a workshop.
Front turn signal lights
1. Remove
bulb holder from reflector
housing by rotating through 90°.
2. Renew bulb.
3. Install bulb holder in reflector
housing.