Owner's Manual

38 Seats, restraints
Gradually lower the seat assembly,
allowing the rear support legs to fold
down. Lower the seat completely,
ensuring the rear support legs are
located, and latched.
Raise the backrest, reinstall head
restraints and connect the seat belts.
9 Warning
When installing the seat, ensure
that
the seat is properly located on
the anchor points and that the
locking catches are fully engaged,
the backrest is returned to the
correct position and the seat belts
are engaged securely.
Removable rear seats
On
some variants, the cargo area can
be increased by removing the rear
seats.
Release the seats by pressing down
and sliding forward the locking catch
located
on the left and right hand seat
mountings.
With both catches raised, push the
seat unit towards the rear and release
them from the floor anchor points.
The seat can then be lifted out.
The seats must be removed through
the sliding door only.
9 Warning
Removable seats are heavy! Do
not attempt to remove without
assistance.
When installing the seats, ensure
that
the seats are properly located
on the anchor points and that the
locking catches are fully engaged.