Owner`s manual
Table Of Contents
- Introduction
- In brief
- Keys, doors and windows
- Seats, restraints
- Storage
- Instruments and controls
- Controls
- Warning lights, gauges and indicators
- Speedometer
- Odometer
- Tachometer
- Fuel gauge
- Engine oil level monitor
- Service display
- Transmission display
- Control indicators
- Turn signal
- Seat belt reminder
- Airbag and belt tensioners
- Airbag deactivation
- Charging system
- Malfunction indicator light
- Service vehicle soon
- Stop engine
- Brake system
- Antilock brake system (ABS)
- Upshift
- Electronic Stability Program
- Engine coolant temperature
- Preheating
- Diesel particle filter
- Engine oil pressure
- Low fuel
- Exterior light
- High beam
- Fog light
- Rear fog light
- Cruise control
- Information displays
- Vehicle messages
- Trip computer
- Tachograph
- Lighting
- Climate control
- Driving and operating
- Vehicle care
- General Information
- Vehicle checks
- Bulb replacement
- Electrical system
- Vehicle tools
- Wheels and tyres
- Towing
- Appearance care
- Service and maintenance
- Technical data
- Customer information
- Index
Driving and operating 101
Press the v button. Control indicator
v illuminates in the instrument cluster
and the message ESP OFF appears
in the Driver Information Centre.
TC is reactivated by pressing the v
button again. Control indicator v
extinguishes in the instrument cluster.
TC is also reactivated the next time
the ignition is switched on.
When vehicle speed reaches
30 mph the TC function will be
restored automatically.
Fault
If the system detects a fault, control
indicator A illuminates in the
instrument cluster 3 69 and the
message CHECK ESP appears in the
Driver Information Centre.
Have the cause of the fault remedied
by a workshop.
Vehicle messages 3 73.
Electronic stability
program
The Electronic Stability Program
(ESP®
Plus
) improves driving stability
when necessary, regardless of the
type of road surface or tyre grip. It also
prevents the drive wheels from
spinning.
As soon as the vehicle starts to
swerve (understeer/oversteer),
engine output is reduced and the
wheels are braked individually. This
considerably improves the driving
stability of the vehicle on slippery road
surfaces.
ESP®
Plus
is operational as soon as
the ignition is switched on and control
indicator v extinguishes in the
instrument cluster.
When ESP®
Plus
comes into action v
flashes.
9 Warning
Do not let this special safety
feature tempt you into taking risks
when driving.
Adapt speed to the road
conditions.
Control indicator v 3 70.
Deactivation
When spinning of the drive wheels is
required ESP®
Plus
can be
deactivated: