Owner`s manual
Table Of Contents
- Introduction
- In brief
- Keys, doors and windows
- Seats, restraints
- Storage
- Instruments and controls
- Controls
- Warning lights, gauges and indicators
- Speedometer
- Odometer
- Tachometer
- Fuel gauge
- Engine oil level monitor
- Service display
- Transmission display
- Control indicators
- Turn signal
- Seat belt reminder
- Airbag and belt tensioners
- Airbag deactivation
- Charging system
- Malfunction indicator light
- Service vehicle soon
- Stop engine
- Brake system
- Antilock brake system (ABS)
- Upshift
- Electronic Stability Program
- Engine coolant temperature
- Preheating
- Diesel particle filter
- Engine oil pressure
- Low fuel
- Exterior light
- High beam
- Fog light
- Rear fog light
- Cruise control
- Information displays
- Vehicle messages
- Trip computer
- Tachograph
- Lighting
- Climate control
- Driving and operating
- Vehicle care
- General Information
- Vehicle checks
- Bulb replacement
- Electrical system
- Vehicle tools
- Wheels and tyres
- Towing
- Appearance care
- Service and maintenance
- Technical data
- Customer information
- Index

102 Driving and operating
Press the v button. Control indicator
v illuminates in the instrument cluster
and the message ESP OFF appears
in the Driver Information Centre.
ESP®
Plus
is reactivated by pressing
the v button again. Control indicator
v extinguishes in the instrument
cluster. ESP®
Plus
is also reactivated
the next time the ignition is switched
on.
When vehicle speed reaches
30 mph the ESP®
Plus
function will be
restored automatically.
Fault
If the system detects a fault, control
indicator A illuminates in the
instrument cluster 3 69 and the
message CHECK ESP appears in the
Driver Information Centre.
Have the cause of the fault remedied
by a workshop.
Vehicle messages 3 73.
Cruise control
The cruise control can store and
maintain speeds of 20 mph and
above. Deviations from the stored
speeds may occur when driving uphill
or downhill.
For safety reasons the cruise control
cannot be activated until the foot
brake has been operated once.
Do not use the cruise control if it is not
advisable to maintain a constant
speed.
With manual transmission
automated, only activate cruise
control in automatic mode.
Control indicators U and m 3 71.
Activation
Press switch m, control indicator U
illuminates green in the instrument
cluster.
Cruise control is now in standby mode
and a corresponding message
appears in the Driver Information
Centre.