Owner`s manual
Table Of Contents
- Introduction
- In brief
- Keys, doors and windows
- Seats, restraints
- Storage
- Instruments and controls
- Controls
- Warning lights, gauges and indicators
- Speedometer
- Odometer
- Tachometer
- Fuel gauge
- Engine oil level monitor
- Service display
- Transmission display
- Control indicators
- Turn signal
- Seat belt reminder
- Airbag and belt tensioners
- Airbag deactivation
- Charging system
- Malfunction indicator light
- Service vehicle soon
- Stop engine
- Brake system
- Antilock brake system (ABS)
- Upshift
- Electronic Stability Program
- Engine coolant temperature
- Preheating
- Diesel particle filter
- Engine oil pressure
- Low fuel
- Exterior light
- High beam
- Fog light
- Rear fog light
- Cruise control
- Information displays
- Vehicle messages
- Trip computer
- Tachograph
- Lighting
- Climate control
- Driving and operating
- Vehicle care
- General Information
- Vehicle checks
- Bulb replacement
- Electrical system
- Vehicle tools
- Wheels and tyres
- Towing
- Appearance care
- Service and maintenance
- Technical data
- Customer information
- Index
78 Lighting
3. Repeat step 2 within approx.
5 seconds.
4. A double acoustic signal sounds
for confirmation.
Repeat the operation to deactivate.
For reasons of safety, it is advisable
to have the automatic light control
function activated.
Daytime running lights
Daytime running lights increase
visibility of the vehicle during daylight.
The lights operate automatically
when the ignition is switched on.
Automatic headlight activation
During poor lighting conditions the
headlights are switched on.
High beam
To change between low and high
beam, pull lever until a click is felt.
Headlight flash
To activate the headlight flash, pull
lever.
Headlight range
adjustment
Manual headlight range
adjustment
Adapt the headlight range to suit the
vehicle load to prevent dazzling of
oncoming traffic.
Turn knurled wheel to required
position:
0 = No load
4 = Loaded up to permissible
maximum weight