VAUXHALL Zafira Owner’s Manual
Data specific to your ve hicle Please enter your vehicle’s data here to keep it ea sily accessible. This information is available under the section "Technical da ta " as well as on the identification plate.
Your Zafira Dev eloped to the la test findings of vehic le research, it offers technical sophistication and exceptiona l comfort. Your vehicle represents an ideal synthesis of ad vanced technolog y, outsta nding safety, environm ental compatibility and economy in opera tion. It now lies with you to drive your vehicle safely and to see it performs perfectly. This O wner's Manual provides you with all the necessary information to tha t end.
2
Contents Comm itment to custom er satisfaction: Our ai m: to k eep you happy with your vehicle. All Vauxhall Authorised Repairers offer first class service at competitive prices. Experienced, factory-trained technicians w ork according to factory instructions.Your Authorised Repairer can supply you with GEN UINE VAU XHALLAPPRO VED PARTS , which hav e und ergone stringent quality and precision chec ks, and of course useful and a ttrac tiv e VAUXHALL-APPROVED AC CESSO RIES.
In brief Key num be rs code numbe rs Remove key number from key. The key number is specified in the vehic le docum ents and in the C ar Pass 3. Alloy wheels 3, towing equipment 3 : Make a note of the key identifier codes. Elec tronic imm obiliser, Radio 3 : The code num bers are sp ecified in the Car Pass and Radio Pass 3 respectively . Do not keep the Car Pass and Ra dio Pass in the vehicle. 6 Further information – see pa ges 58, 59, vehicle recomm issioning – see page 254.
Unlock luggage compartme nt: Turn key clockwis e as far as it will go In order to av oid being locked out, the k ey cannot be removed. Position of key slot in lock: – horizontal tailgate is locked and unlocked together with the centra l locking, – vertical tailgate is always locked. 6 Ra dio frequency remote control 3 – see page 60, central lock ing 3 – see p age 62, Vauxhall alarm system 3 – see page 64.
Adjusting height of front seats 3: Leve r on outboard side of seats Lever pumping ac tion Upward = Seat higher Downward = Seat lower 6 S eating p osition – see page 71. 6 Adjusting angle of front seats 3: Pull lever, adjust angle, release lever 6 Seating position – see page 71. Front seat lumbar s upport 3 adjustment: Turn handwheel Adjust lum bar sup port to suit personal requirements. Do not lea n on seat when a djusting. 6 Sea ting position – see pag e 71.
Thigh support 3 adjust position in re lation to front seats : Lift and s lide front support padding Do not adjust the thigh support w hilst driving. 6 S eating p osition – see page 71. Adjust head restraint height of front seats and outboard seats in second row: Tilt forward to release , hold and adjus t height, release 6 Head restraint position – see page 72, further informa tion, rem oval – see page 72, rear head restraints 3 – see pag e 72.
Adjusting interior m irror: Swivel mirror hous ing Swiv el lev er on underside of mirror housing to red uce daz zle a t nig ht. Adjusting automatic anti-dazzle interior mirror 3 : swivel mirror housing Glare at night is automatically reduced. The mirror does not reduc e da zzle when: z The ig nition is sw itched off, z Reverse gear is engaged or the selector lever set to R, z The interior lights are on.
Fitting seat belt: Draw se at be lt smoothly from inertia ree l, guide over shoulder and engage in be lt buckle The b elt must not be twisted at any point. The lap belt must lie snugly against the body. The front seat backrests m ust not be tilted back too far (recommended tilting angle approx. 25°). To release belt, press red button on belt buckle. 6 S eat b elts – see page 87, airbag sy stems 3 – see p age 93, seating position – see page 71.
10
1 Page Side air v ents ... ..... .... ..... .... .... ..... .... 154 2 Front pa ssenger airbag 3 .... ..... .... . 93 3 Centre air v ents .... .... ..... .... .... ..... ... 154 4 Left hea ted sea t 3 ... ..... .... .... ..... ... 156 Fan for rea r passeng ers 3 .... ..... .... .... .163, 173 Haza rd warning flashers .. .... ..... .... . 16 Cooling for rea r passeng ers 3 .... ..... .... .... 163, 172 Right hea ted sea t 3 . ..... .... .... ..... ... 156 5 Radio 3, Infotainm ent system 3 . .... ...
Control indicators ? v Airbag systems 3, bel t tensioners, see p ages 88, 98. X Sea t belt 3, see p age 32. R Brake system, clutch system, see p ages 33, 196. @ Electronic ally controlled engi ne cooli ng 3, see p age 33. ! Preheating system 3, see p age 33. 12 A Automat ic headlig ht range adjustment 3, fault, see p ages 32, 144. Engine elect ronics, Autom atic t ransmission 3, Im mobil iser 3, Fault: see pages 33, 59, 190.
Lighting Lig ht switch, lev er positions, see p ages 15, 143. 7 8 9 Lig ht s off 0 Courtesy lig ht, see p age 145. He ating, ve ntilation, air conditioning system 3, electronic air conditioning system 3 x Pa rking l ights Di pped and main b eam > Fog l ights 3, see p age 143. r Fog t ail lig ht, see p age 143. k Instrument illum ination, see p age 144. ? Hea dlight range adjustm ent , see p age 144. ¨ Haza rd wa rning flashers, see p age 16. Air quantity, see pages 152, 158, 170.
Tilt / slide sun roof 3, skylight roof 3 l Front t ilt / slide sun roof 3, op ening / low ering, see p age 150. \ Front t ilt / slide sun roof 3, closing / raising, see p age 150. \ w Rea r sk yl ight roof 3 , ra ise, see p age 151. Rea r sk yl ight roof 3 , lower, see p age 151. Winds creen wipe r Stalk positions, see p age 17, § $ % & 14 Off Tim ed interv al wipe Slow Fast Date, time Misce llaneous Inform ation d isp lay 3, see page 40, p Central l ocking system , loc king: see page 60.
Light switche s: 7 = Off 8 = Parking lights 9 = Dipped or m ain beam Main and dipped be am switch: Main be am = Pus h stalk forwards Dippe d beam = P ull stalk towards ste ering w heel Pull 0 = C ourtesy light Push r = Fog tail light By overcoming the stalk resistance the headlight flash is operated.
Operating turn signal lights: Stalk in rest pos ition Right turn = Upwards Left turn = Downwards When the steering wheel is turned back, the stalk automatically returns to its origina l position. This will not hap pen when making a m inor steering manoeuvre such as changing lane. When lane changing , move stalk part way , to first stop. When released, stalk will spring back. 16 Cruise control operation: Pre ss button on stalk Switch on: Tap button I . Switch off: Tap b utton § .
Horn operation: Press j 6 Airbag sy stems 3 – see page 93, rem ote control for ra dio and Infotainment system 3 – see page 30. Windscre en wiper: Move stalk up § = O ff $ = Time d inte rval wipe % = Slow & = F as t Automatic wiper with rain s ens or 3 : Move stalk up § = Off $ = Autom atic w iper with rain s ens or % = Slow (constant) & = Fast (constant) Automatic wiping $: The rain sensor detects the amount of w ater on the windscreen and automatically regulates the wind screen wiper.
Operating windscre en and headlight w as h s yste ms 3: Pull stalk tow ards steering wheel The w ip er will swipe for a few strokes. The headlight wash sy stem 3 can be opera ted when the lights are on. O n vehicles fitted with rain sensors 3, opera te the wind screen wash system at reg ular intervals, to keep the sensor a rea clean. 6 Further inform ation – see pages 252, 257.
To dry miste d or icy w indows: Turn rotary s witch for heater and fan clockwis e, air distribution to V , Press air conditioning switch n 3 Se tting ele ctronic clim ate control to automatic mode: Pre ss AUTO button, set temperature using rotary knob Close centre air vents; open side air v ents and direct them towards the door windows. 6 Electronic air conditioning system 3 – see page 166.
Manual transmission: o = Neutral 1 to 5 = 1st to 5th ge ar When shifting up from 4th to 5th gear: Push the lever towards the right at the beginning of the shift opera tion. When shifting from 5th to 4th g ear: Do not ex ert any force towards the left. Manual trans miss ion: R = Re ve rse gear Reverse gear: With vehicle stationary , pull the ring up three seconds after declutching and engag e gear.
Exhaust gases are toxic Exhaust g ases contain ca rbon monox ide, which is ex tremely poisonous but has no odour or colour. Therefore never inhale exhaust gases, and nev er run the engine in an enclosed space. Before starting off, check: z For ty re pressure and condition see pages 200, 270. z Engine oil level a nd fluid levels in engine compartment – see pages 244 to 252.
Starting, petrol engines: Manual transmission: In neutral with clutch de press ed Autom atic transmission: In P or N, Do not accelerate Turn key to position III The initially increased engine speed automatically fa lls as the engine tem perature rises. Before repeating the starting proced ure, turn the key ba ck to o in the ig nition switch, rem ov e it and then reinsert it. 6 Electronic imm ob iliser – see page 59, further information – see pages 182, 183.
Advice whe n parking: z Always ap ply handbrake firmly.
Genuine V auxhall Parts and Acces sories We recommend that you use " Genuine Vauxhall Parts a nd Accessories" and conversion parts released expressly for your vehicle ty pe. These parts have undergone special tests to establish their reliab ility , safety and specific suitability for Vauxhall vehicles. Despite continuous market monitoring, we cannot assess or guarantee these attributes for other products, ev en if they have been granted approva l by the relevant authorities or in som e other form.
Seats in se cond row Keep hands out of hinge area when folding sea t backrests in second row up or down, risk of injury. Seat back rests must not be set to vertica l position when transporting p ersons. Moving seats Push release handle on right or left hand side of seat bench forward and move seat row forwa rd or back. Release handle and allow seat row to lock into p osition. Ad just back rest s of out board seats Push release lever down at b ackrest, bac krest angle can be adjusted in two places.
Arm rest i n tilted m iddle ba ckrest Push midd le head restraint down as far as it will go – see page 72. Pull top handle at back of middle back rest, fold back rest onto seat cushion and latch into position. Push rear handle of tilted bac krest and fold armrest out. To move backrest upright, fold a rm rest back. Pull front handle a t backrest, move backrest upright and latc h into position. The back rest latches in two positions. No-one must sit in the seat w ith the backrest in the vertical position.
As shown in the illustration, seat b elts must be routed throug h the fixtures and latch plates inserted in the fixtures. Front luggage compartment, lift seat with one hand using handle, swivel back and move up rig ht until it is heard to engage, supporting top of b ackrest with other ha nd – see Fig . 14480 T. Lift cov er in floor between seats and swivel seat belt buck les upward – see page 28, Fig. 14477 T. Remove latch plate and belt from fixture.
Fold seats into floor of v ehi cle Before fold ing in the seats, m ov e the seat benc h in the second row forward b y pushing the handle on the right or left hand side of the seat bench forwa rd until the marking on the sea t b ench is level with the adjacent marking – see page 26, Fig. 14478 T. Push down head restraints of seats in third row, releasing spring catches by pressing – see page 72. Guide seat belt through fixture, as shown in illustration, and insert latch pla te into fixture.
Operating the multi-information display 3, the graphical information display 3 or the colour information dis play 3 Using but tons on wiper stalk S Ca ll-up / Reset / Confirm R Reset / Confirm Usi ng multi func tion butt on Push C onfirm / select Rota te Move within menu 6 Further information – see p age 42. Trip computer 3 The trip computer shows vehicle data which it continua lly records and evaluates electronically.
Check control 3 The c heck control function monitors some fluid lev els, the thickness of the front disk brake linings and important exterior lights, including c ables and fuses. When towing a carava n / trailer the trailer lighting is also monitored. 6 Further inform ation – see page 48. 30 Re mote control for radio and Infotainment system 3 Radio, rad io telephone 3 and Infota inm ent sy stem 3 functions ca n be operated using the buttons on the steering wheel.
Sid e a irbag system 3 The side airbag system triggers when a side-on collision occurs and provides a safety barrier for the d riv er and/or passenger in the respectiv e front door area. This reduces the risk of injury to the upper body c onsiderably in case of a sid e impac t. Curt ain airb ag system 3 The c urtain airbag sy stem triggers in c ase of a side-on collision and provides a safety barrier in the head area on the respective side of the vehicle.
Instruments Control indicators Airb ag system s 3 , belt tensioners see pages 88, 98. ? X Fault in autom atic head light ra nge adjustm ent 3 Control indica tor lights up for a few second s w hen ignition is switched on. If it lights up when driving: A fault has occurred . Consult a workshop immed iately. We recommend a Vauxhall Authorised Repairer. Head lig ht range adjustment – see p age 144. 32 v The control indica tors described here are not present in all vehic les.
! Prehea ting 3 for diesel engines C ontrol indicator lights up during preheating. Preheating sy stem only switches on at low outside temperatures. A Engine el ect ronics, transmi ssion electronics 3 , im mobil iser C ontrol indicator lights up for a few seconds when ig nition is switched on. R @ Brak e system , clutc h system 3 Control indicator lights up when ignition is switched on if handbrake is applied a nd /or the fluid level for b rake / clutch hydraulics is too low .
I O il pressure C ontrol indicator lights up when ignition is switched on. Goes out shortly after engine starts. Can light up interm ittently when idling with hot eng ine; must go out when eng ine speed is increased . If it lights up when the eng ine is running: Eng ine lubrication m ay be interrup ted. This ma y result in damage to the eng ine and/or locking of the drive wheels: 1. Depress clutch. p Alternat or Control indicator lights up when ignition is switched on.
1 Electronically cont rolled d ri ve programmes for automatic transmission 3 C ontrol indicator lights up when sporty driving p rogram me is operative. Further information – see page 177. v Trac tion Control system (TC) 3, Electronic S tabil ity Prog ramm e (ESP) 3 see pages 192, 193. u Anti -lock Bra ke Syst em (ABS ) 3 see page 198. > r Fog light s 3 Control indicator lights up when fog lights are sw itched on. Fog t ail li ght Control indica tor lights up when fog tail lig ht is switched on.
Y g Fuel l ev el If it lights up when the engine is running: Fuel supply low, fuel gauge in reserve area. Tr ailer turn signal s 3 When towing a trailer or caravan, indicator lig ht flashes at same speed as turn signa ls. Does not flash if trailer or towing vehicle turn signal fails. If it flashes when the engine is running : Fuel tank empty. Refuel immediately – see page 187. Never let the tank run dry! Petrol eng ines: Erratic fuel supply can cause ca talytic converter to overheat – see page 188.
Trip odometer To return to zero, press reset button w ith ignition switched on and trip odometer display activated . Vehicles with time display in od om eter: To return to zero, press and hold d own reset button for ap prox . 2 seconds with ignition switched on and trip odometer display activated . S witc h between trip odometer display and time disp la y 3 by tapping the reset button – see next pa ge. Tachometer 1) Spee dome ter 1) Indicates engine speed. Indicates the vehicle speed .
Setting t he t ime With time displayed, press reset button in instrument: Press for approx . 2 seconds: Hours flash Press briefly : Set hours Press for approx . 2 seconds: Minutes flash Press briefly : Set minutes Press for approx . 2 seconds: Clock starts at 0 seconds. Time display in odometer 3 To sw itc h b etween trip odometer and time display 3 give reset knob a short press.
For physical reasons, the engine temperature gauge show s the coolant temperature only if the coolant level is adeq uate. During operation the system is pressurized. The temp erature ma y therefore rise briefly to ov er 100 °C.
Inform ation display Tripl e inform ation d isp lay 3 Display of time, outsid e temp erature, radio and da te. When the ig nition is on, the time and outside tem perature are d isplay ed. The date is disp la yed when the radio 3 is switched off. When the ignition is off, the time, date and outside tem perature can be made to appear for approx. 15 seconds by briefly pressing one of the two buttons ab ov e the display.
I nt err up tion of pow er supp ly After a power supply interrup tion or low battery voltage the electronic rad io disabler 3, da te and tim e m ust be reset. S ee rad io operating instructions for how to disable electronic bloc k. Entering date and time - see page 46. Upon receipt of a tim e signal from an RDS transmitter 1) , date and time are set automatically 3 – see page 46.
O peration using the multifunction button: Individ ual menu item s are highlighted by turning the button and are selected by pressing it. Press the BC button on the Infotainment system to open the trip computer. Operating the multi-information display 3, the graphical information display 3 or the colour information dis play 3 Trip computer functions are operated using the disp la y menu and the buttons on the wiper sta lk 3 or the Infotainment sy stem 3.
Making system settings for the graphical information display 3 or the colour information display 3 Lang uage selecti on You can select the d isplay language for some func tions. The figures show execution with the colour inform ation d isplay . In the System Setti ngs menu, select item Instructions. In the trip computer m enu Setti ng s select System Setting s. The list of available languages will b e display ed. S elec t the required language from the list.
Setti ng units of measure You ca n select w hich units of measure a re to be used. Adjust contra st In the System Setti ngs menu, select item Contrast. In the System Set tings menu, select item Units. The contrast m enu will be displayed. Select from the list of units that opens. Selections are indicated by a 6 in front of the m enu item . 44 Confirm the required setting.
Outs ide tempe rature A fall in temperature is indica ted immediately and a rise in temp erature after a time delay . To warn the driver that the road surfac e may be icy, when the temperature drops below 3 °C the symbol : appea rs on the display (not in all v ehicles; exceptions are detailed to the right). When the outsid e tem perature increases, the sy mbol : does not disappea r from the display until the tem perature reaches 5 °C .
Setting date and time In the Infotainment system 3 , the da te and time are adjusted automatically a fter receipt of a GPS satellite signal 1 ). If the displayed time does not match the local time, the tim e ca n be entered manually in steps of 30 m inutes or automa tica lly 2 ) corrected 3 by receiv ing an RDS time signa l. For the radio, tim e and date can be set manually or corrected a utoma tica lly v ia an RDS tim e signal 3 . The a utomatic setting is indicated by Ö in the d isplay .
Vehi cles w ith gra phical informati on displ ay 3 or colour informa tion displ ay 3 With the Infotainm ent sy stem on, da te and time can be set with buttons Ö and ; above the display : Ö The da te and time can also be set using the Infotainment sy stem: In the trip com puter menu Settings select item S ystem S ett ings and then item Ti me / Da te. Press and hold down for approx. 3 seconds, menu for setting date a nd time appears. The menu for time / date will b e displayed. Ö Move within the menu.
Check control 3 Brake Pad Check control monitors fluid lev els, the thickness of the front disk brake linings and the status of important exterior lighting components, including wires and fuses. The lig ht monitoring function only indicates a fault if the relev ant power circ uit is switched on. Front disc brake p ads are worn down to the minimum thickness. Consult a w ork shop to have the brake pads replac ed. We recommend a Vauxhall Authorised Repairer.
Fault warnings (ctd.): Hea dlight Ta illight Dipped head lig ht or ta il light fa ilure. Ac know ledge the fault wa rning as indica ted on pa ge 42. After acknowledgement, the wa rning will be cleared from the display . The fault warning s Wa sh. Fluid Level Fluid level in windscreen wash system too low. Top up wash fluid – see page 252. Brak e Lig ht Fuse I nt err up tion of pow er supp ly C heck c ontrol automatically checks all functions after the battery has been reconnected or c ha rg ed.
Functions: z Instanta neous consum ption z Average consumption z Effective consumption z Average speed z Distanc e z Range z Stop watch (multi-information display only) Check control w arnings alway s hav e priority. Trip computer 3 The trip computer show s v ehicle data which it continually records and evaluates electronic ally . Some of the functions a ppear on the display in a n abbrev iated form. The figures show the v ersion w ith m ultiinform ation d isplay .
Averag e c onsum ption Ca lc ulation of average consumption. The measurement can be restarted at any time – see pa ge 42. Effectiv e consum ption Shows the amount of fuel consum ed. The measurement c an be restarted at any time – see page 42. Av era ge sp eed C alcula tion of av erage consump tion. The measurement can be restarted at any time – see page 42. S topp ages in the journey with the ignition off are not included in the c alcula tions.
Distance Shows the number of miles (kilometres) travelled. The measurement ca n be restarted at any tim e – see page 42. Range abov e 30 miles (50 k m) The range is c alcula ted from the current contents of the fuel tank and the average consumption over the last 12 to 20 miles (20 to 30 km) of the journey. After filling up the vehicle, the range adjusts itself automatically a fter a short tim e. It can also be adjusted ma nually – see p age 42.
Resetting current trip comput er informat ion The follow ing trip computer information can be reset (restart m easurements): z z z z z z Range (only with vehicle stationary ), Effective consumption Average consumption Average speed Distanc e Stop watch (multi-information display only) Vehicles with multi-information display: Press button R – see page 42.
The range values can only be reset if the vehicle is stationary. After resetting, " - - -" is d isplay ed with the trip computer information selected. The recalculated values are displayed after a brief delay.
Interruption of p ower supply If the power supply has been interrup ted or if the battery voltage has dropped too low, the values stored in the trip computer will be lost. Vehicles with graphical information display 3 or colour information display 3: In trip com puter Setti ng s menu, select menu item BC Reset a ll. The values are reset and "*** " is displayed. New va lues are only display ed when the engine is running. The avera ge speed is calculated shortly a fter sta rting to driv e.
Infotainm ent s yste m 3 The Infotainment sy stem is operated as desc ribed in the operating instructions supplied. DVD video s yste m 3 The system is opera ted as described in the AutoVision 3 opera ting instruc tions. Radio 3 The rad io is operated as described in the opera ting instruc tions supp lied. The rad io display appears on the inform ation d isplay .
Mobile telephones and radio equipm ent (CB) 3 O btain advice on predetermined insta lla tion locations for the ex ternal antenna a nd equipment hold er and ways of using d evices with transmission power of more than 10 Watts. We recommend that y ou consult a Vaux hall Authorised Repairer, who will have consoles and va rious insta lla tion kits and w ill install them in accordance with regulations.
Keys, doors, bonnet Re place ment ke ys The key is a c onstituent of the electronic immobiliser. Ordering keys from a Vauxhall Authorised Repairer g uarantees problem free op eration of the electronic immobiliser. Y ou will avoid unnecessary costs, difficulties with insurance comp anies when processing claims and problems asserting wa rranty claims. Locks - see pa ge 259. Door locking and unlocking From outside: Radio frequency rem ote control – see page 60, Central lock ing – see page 62.
Ele ctronic imm obilise r The sy stem checks whether the vehicle m ay be sta rted with the key that is being used . If the k ey is recognised a s "a uthorised" the vehic le can be sta rted. The checking takes place in a transpond er in the key . To act ivat e: Switch off eng ine, turn key to position o and remove. To deacti vate: Turn key to position I I (ignition on); the engine can then b e started.
C entra l lock ing system, see page 62. Mechanic al anti -theft locki ng system 3 , see page 64. Vauxhall ala rm system 3, see page 67. Radio fre quency re mote control The rad io frequency remote control is integrated in the key . Used to op erate: z Central locking system , z Mechanical anti-theft locking system , z Vauxhall ala rm system 3 . The remote control has a range of approxim ately 3 metres. The range can change depending on ex ternal influences. Point remote control at vehicle when opera ting.
Fault If the central locking system cannot be opera ted with the remote control, it m ay b e due to the following : z The range of the rem ote control has been ex ceeded. z The battery voltage of the remote control unit is too low. Change the battery, see following columns. z The remote control has been repeatedly op erated from outside the v ehicle’ s recep tion rang e (e.g. too far from vehicle and remote control is not recognised ). Synchronise remote control, see following columns.
Not e z To prevent the driv er from being ina dvertently locked out, the b utton on the driver's d oor c annot be depressed when the door is open. z If the driver's door is not closed properly , the central loc king sy stem will unlock again immediately after lock ing. z To loc k the d oors from insid e (e.g. to prevent unw anted entry from outside), push down lock button on driv er’s door. Central locking system For d oors, tailgate and fuel tank filler neck cover.
Cl osing window s, tilt / slid e sun roof and skylight r oof 3 The electric wind ow s 3 , the tilt / slide sunroof and the skylight roof can b e closed from the outside: Insert key into driver’ s door lock and hold in locking position until all windows, the tilt / slide sunroof and the skylight roof are closed. C are must be taken w hen operating the electric windows 3, tilt / slide sun roof 3 and sky lig ht roof 3 .
Central locking system, mechanical anti-the ft locking system 3 Locking All doors must b e closed, the driv er’s door must have been opened once previously ; press button p on the remote control again within 10 second s a fter locking – or – Turn key in driver's door lock towa rd s rear of vehic le aga in within 10 seconds after locking, then turn it b ack to the vertical position and remove. Loc k buttons on all d oors are positioned suc h that doors cannot be opened.
K ey slot in lock in vertical p osition: Tailgate rema ins locked even if the vehicle is unlock ed using the remote control or by turning the key in the driver's door lock. This position is to be chosen if the tailgate is to stay lock ed. Turn key anticlockwise as far as it will go. 6 Tailgate Loc king and unlocking using the remote control or key in the driv er’s door lock together with central locking of d oors and fuel tank cover - see p age 62. See following columns for restrictions.
Not e z The central lock ing sy stem and the antitheft locking sy stem for the doors cannot be lock ed or unlocked from the tailgate loc k. z There a re two handles on the inside of the tailgate to assist closing. z Fitting of accessories on the tailgate will increase its weight. If it becomes too heavy , it will not stay open. Unlock ing tailg ate w hen doors are loc ked wi th central loc king syst em Turn key clockwise from vertical or horiz ontal position as far as it will go.
Vauxhall alarm s yste m 3 The system monitors; z Doors, tailgate and bonnet, z Passenger compartment, z Vehicle tilt, z Ignition To activ ate: All doors, the tilt / slide sun roof 3 and sky light roof 3 must be closed ; press button p on rem ote control unit ag ain within 10 seconds after locking – or – Turn key in d riv er's door lock towards rea r of vehicle again within 10 sec onds after lock ing , then turn it back to the v ertical position and remove.
2. Open tailgate. 3. Close tailgate. 4. To loc k: Turn key back to prev ious position. Passenger com partment monitoring, lugga ge c om partment monitoring and monitoring of vehicle tilt is switched on again after approx. 10 seconds. To deacti vate: Press button q on rem ote control unit – or – Turn k ey in driver's door loc k towards front of vehic le, then turn it b ack to the vertical position and remove. 68 Opening a nd closing ta ilgat e w ith anti-theft a larm syst em acti vated 1.
After the first 10 seconds of anti-theft alarm system activation: z LED flashes = System on z LED lights up for approx. 1 second = Switch-off If a system fa ult occ urs, consult a work shop. We recom mend a Va ux ha ll Authorised Repairer. The system’s integ ra ted self-diagnostics allow s faults to be quickly remedied. Ala rm O nly a certain num ber of a la rm s are allowed to be trigg ered while the anti-theft alarm system is switched on (this number is stipula ted b y law).
Bonnet To open the bonnet, p ull the release lev er / , located on the driver's side below the instrum ent panel. The bonnet will then be unlocked and will pa rtially open. Return release lever to its original position. To op en completely , locate safety catch slightly to the right of centre as viewed from the front: lift this upwards and op en bonnet.
Seats, Interior Adjusting the front s eats see p age 7. Adjusting se ats in second row see p age 25. Folding seats in third row see p age 26. Increasing luggage compartment size by folding down the front seats see p age 73. Seating position Adjust driver's seat such that with the driver sitting upright the steering wheel is held in the area of its upper spokes with the driver's a rms slightly b ent. Push p assenger seat as far b ack as possible.
Head restraint position He ad res traints The midd le of the head restraint should be at eye lev el. I f this is not possible for extremely tall persons, set to highest position, and set to lowest position for small persons. Front seats and outboard seat s i n second r ow To remove head restraints: Release the tw o springs by pressing them and deta ch the hea d restraint. Disreg ard can lead to injuries which could be fatal. Vehicle p assengers should be informed accordingly. Adjustment - see page 7.
Luggage compartment extens ion Max imum luggage compa rtm ent space is achieved by removing the lug gage compa rtm ent cover and folding over the seats in the second and third rows a nd the passenger backrest 3, see follow ing desc ription. Keep hands awa y from hinges when folding seats or rows of seats, risk of injury. Armrest 3 at driver’s seat Pull raised armrest forward against the resista nce. The armrest can be set to various positions by lifting it.
Lowering seats in third row int o floor of v ehic le Before lowering the seats, move the seat benc h in the second row forward b y pushing the handle on the right or left hand side of the seat bench forwa rd until the marking on the sea t b ench is level with the adjacent marking – see page 26, Fig. 14476 T. Push down head restraints of seats in third row, releasing spring catches by pressing – see page 72. Guide seat belt through fixture, as shown in illustration, and insert latch pla te into fixture.
Push belt buckles into recess in floor and close cover. Slide seat bench in second row to required position, pushing lev er to right or left of seat b ench forward – see Fig. 14473 T, page 25. Raising seats in third row - see page 26. Removing luggage compartment cover - see page 77. Fold ing down b ack rests of outb oard seat s i n second row Push down head restraints of outboard seats in second row. Plac e sea t belt b uck les in pockets in seat bench.
Pull top handle on back of m iddle backrest, move backrest to v ertical position and latch into p osition. Push down lev er 3 to right or left of seat bench, m ov e sea t bench as far forward as possible and latch into position. To move up rig ht, press lever 3 and slid e seat benc h to required position. Adjust backrest angles and swivel seat cushion down using lever 1. All positions must audibly latch.
Luggage compartment cover Before operating the luggage compartment cover the rear seat belts must be inserted into the fixtures a t the sides (see illustration). To close: Pull the cover towards the rear using the handle and engage it in the retainers at the sides. Do not place any heavy or sharp-edged objects on the cover. Rem oving Open the luggage comp artm ent cover. Press the knob on the rig ht-hand side of the cover, press the right-hand end piece to the left, and lock in.
Safety net 3 The safety net c an be fitted behind the second row of sea ts or, if the seats in the second row a re folded down, behind the front seats. Passeng ers must not b e transported behind the safety net. Fitting There are tw o installation holes in the roof frame: O pen covers, attach rod of net at one side and lock in p lace, ex tend rod, attach at other side and lock in place.
Floor cover for luggage com partm ent 3 When the third row of seats is not in use and the seats are folded aw ay under the floor, a cov er 3 can be placed over the luggage compa rtm ent floor. Stor age of safet y net Roll up the removed safety net and secure it with Velcro strip. Raise sea t bench for second row of seats – see page 76. Slide sa fety net into holder below seat bench, fold seat b ench down, enga ge.
z Secure loose a rticles in lugg age compa rtm ent using lugga ge net 3 to prevent sliding – see pa ge 79. z Always fit safety net 3 when transp orting articles in lugga ge compa rtm ent – see p age 78. z Do not a llow the load to protrude ab ov e the upp er edge of the back rests of the seats in the sec ond row or, if the second row seats ha ve been removed , abov e the upper edg e of the front seat backrests. z The warning triangle 3 and first-aid kit 3 must alway s b e freely a ccessib le.
The maximum power c onsumption of electrical ac cessories m ust not ex ceed; z 120 watts at the socket in the c entre console and 50 w atts with the heated seats switched on 3, z 120 Watts a t the accessory socket 3 in the storage compartment (when towing, the max imum power consumption is reduced by the wattage of the accessories in use in the carav an or tra iler). Do not connect any current-delivering acc essories, e.g. electrical charging devices or b atteries.
Ashtrays To be used only for ash and not for combustible rubbish. Disreg ard may lead to injuries or endanger life. Vehicle pa ssengers should be informed accordingly. Ashtray, front 3 Press ashtray cover to op en. 82 To empty , grip b oth sides of the ashtray insert a nd pull upwards. Ashtrays, rear 3 To open, swivel the cover upwards. The rear ashtrays can be rem oved for emptying or for use in the third row by mov ing the cover back and forth to disengag e it and then lifting out the ashtray upwards.
Storage compartments in the luggage compartment The vehicle tool k it with the jack and towing eye, the wa rning triangle ¨ 3 a nd the trailer coupling ball bar are stored under a flap in the vehicle floor at the rear 3. To open the fla p, lift the ca rp et. Rotate and lift the m etal ring. Spa re wheel storage 3 – see p age 218. Store first-aid k it in compartment in side trim + 3 – see pa ge 216.
Glove com partm ent To open, pull hand le. O n the inside of the glov e c om partment cover there is a pen holder. Storage com partm ent in front armre st 3 To open, press button and open top pa rt of armrest. Drink holders 3 These are located at the front underneath the ashtray and in the front door pockets. More drink holders can be found in the midd le ba ckrest in the second seat row in the folded-down position – see page 75. Push rear hand le of tilted backrest and fold armrest out.
Sun visors The sun v isors can be folded down or swiv elled to the side to prevent dazzling. Drink hold ers can also be found in the side storag e comp artments adjacent to the third seat row.
Safety systems Three-stage re straint system Comprising: z three-point seat belts z Belt tensioners at the front seats z Airbag system s for driv er, front passenger 3 and outboard rear seats The three stag es are a ctivated in sequence depending on the seriousness of the accident: z The automa tic seat belt locking devices prevent the belt strap from being pulled out and thus ensure that the v ehicle occupants are retained in their seats. z The front seat b elt buckles are p ulled downwards.
Seat belts Alwa ys wea r your seat belt, and that means also in urb an traffic and when you are a rear seat passenger. It can save y our life! Pregnant women m ust alwa ys wear a seat belt – see page 90. In the event of an accident, persons not wearing sea t belts enda ng er their fellow oc cup ants and themselves. Control indica tor – see page 32. X for seat belts Sea t belts are desig ned to be used by only one person at a time.
Belt tens ioners The front sea t belt system incorporates belt tensioners. In the event of a head -on or rea r-end collision, d epending on the severity of the accident, the belt buckles are pulled d ow nwa rd s; the diagonal a nd lap b elts are instantaneously tightened. Actuati on of belt tensioners Indicated by the control indicator v. Belt tensioner actua tion ma y also be indicated by y ellow tabs on the belt buck les. The belt tensioners must be replaced after activation.
Have the cause of the fault remedied . We recom mend that y ou consult a Vauxhall Authorised Rep airer. The system ’s integrated self-diagnostics allows faults to be quickly remed ied. H ave your C ar Pass on hand when consulting a Vauxhall Authorised Repairer. Imp or tant z Accessories and other objects must not be affixed or placed within the action zone of the belt tensioners a s this may result in injury if the belt tensioners are triggered.
Using the belts Fitting the b el t Pull the belt out of the retractor and guide it across the body , making certain that it is not twisted. Insert latch plate into buckle. Backrest must not be tilted too far back , sinc e this would affect the opera tion of the seat belts; recommended tilting a ng le app rox . 25°. The lap belt m ust be stra ig ht and lying snugly against the body . Tighten lap belt at frequent intervals whilst driving by tugging diagonal pa rt of belt.
Adjust height such that the belt p asses over the wearer's shoulder and rests against the shoulder. It must not pass over the neck or upper arm. Rem oving t he b el t To remove the belt, d epress the red push button on the buckle; the belt will retrac t autom atic ally. Seat belts in the sec ond row When adjusting sec ond seat row to enlarge luggage compa rtm ent, plac e sea t belt buckles in pockets in seat bench as shown in figure.
Inspe ction of belts Plea se check all parts of the b elt system occasionally for dama ge a nd correct operation. H ave da maged parts replaced . In ca se of an accident, please replace overstretc hed belts and triggered belt tensioners. We recommend consulting a Vauxhall Authorised Repairer. Do not perform any altera tions on the belts, their anchorages, the automatic retrac tors or the belt buck les. Mak e sure that b elts are not da maged or trapped by sharp-edged objec ts.
Exception: Passenger sea t with seat occupancy recognition system 3 . The seat occupancy recognition system deactiva tes the passenger front and side airbags if the passenger seat is unoccupied or a Vauxhall child restraint system with transponders 3 has been fitted to the passenger seat. S eat occupa ncy recognition – see p age 99. Vauxhall c hild restraint sy stem with transponders 3 – see pag e 104.
When trigg ered , the front airbags inflate in milliseconds and form a safety cushion for driver and front passeng er. The forw ard movement of the driver and front passenger is checked and the risk of injuries to the upper body a nd head thereby substantially reduced. No im pairment of view will occur, because the a irb ags inflate and deflate so quickly .
Seat belts must always be worn. The front a irb ag system serv es to supplement the three-point seat belts. If y ou do not wear your seat belt you risk being seriously injured, or even thrown from the vehic le, in the ev ent of an accident. If an accident occurs the belt helps to maintain the correct seating position that is required for the front airbag system to provide you with effective protection.
There must be no objects in the area in which the airb ag inflates or in the a rea between the seat backs and the vehicle body . Do not place the hands or arms on the covers of the airba g systems. Imp ortant information – see page 101. The three-p oint seat b elt m ust always b e correctly fitted – see page 90.
Curt ain airb ag 3 The c urtain airbag sy stem can b e recognised by the word AI RBAG on the roof pillar panelling.
There m ust be no objects in the area in which the airbag inflates. Do not place the hands or arms on the covers of the airb ag sy stems. I mportant inform ation – see pa ge 101. Have the c ause of the fault rem edied. We recom mend that you consult a Vauxhall Authorised Repairer. The sy stem’s integrated self-diagnostics allows faults to be quickly remedied. Have y our C ar Pass on hand when consulting a Vauxhall Authorised Repairer.
Seat oc cupancy recognition 3 The seat occupancy recognition system deactivates the front and side passenger airbags if the front passenger seat is unoc cup ied or a Vaux hall child restraint system with transponders 3 has b een fitted to the front passenger seat. The curtain airbag sy stem remains activated to protect the p assengers. The c ontrol indicator for seat occupancy recognition is loca ted in the c ourtesy lig ht. If this control indicator lights up after the ignition is switched on for a pprox.
If a child restraint system is incorrectly fitted or the transponders are faulty the control ind icator will flash. C heck that child restra int system has been fitted correc tly . Fitting child restraint system w ith tra nsponders 3, – see pag e 110. If the control indicator does not illumina te with a correctly installed child restraint sy stem there is a fa ult. Risk of fatal injury to the child. Fit child restraint system to rear seat. Ha ve c ause of fault remedied.
z O nly protective covers whic h are approved for y our Zafira with side airbag 3 ma y be fitted on the front seats. When fitting the protective covers, mak e sure that the airbag units on the outboard sides of the front seat back rests a re not covered. z Do not modify airbag sy stem components, since this would render the vehicle un-roadw orthy. z Use the hooks in the roof frame only to hang up light articles of clothing or c oa t hangers.
z Persons weighing less than 35 kg should only tra vel on the rear seats. This does not ap ply to children who are trav elling in c hild restra int system s w ith transponders 3. Vehicles with front passenger a irba g can be identified by the word AI RBAG abov e the glove com partment a nd the warning sticker on the side of the instrument panel, visible when the passenger door is open.
The seat occupa ncy recognition sy stem detects Vauxhall child restraint systems with tra nsponders 3 and deactivates the front and side airbags at the passenger side. The curtain a irb ag system remains activated . Seat occupancy recognition – see p age 99. Vauxhall c hild restraint system s w ith tra nsponders 3 can be identified by the sticker on the child restraint system.
Vauxha ll safety c radle wi thout transponder From birth up to a weight of 10 k g. Va uxhall sa fety crad le with t ransponders From b irth up to a weig ht of 10 kg. The transponders a re integ ra ted in the seat cushion. Vauxhall Top S afe child safety seat w ith or wi thout ISO -FIX atta chment, w ith transponders From birth up to a w eight of 18 kg. The tra nsponders are integrated in the seat console.
Vauxha ll child sa fet y seat wi thout transponder From body weight of 9 1) kg to 36 kg.
Use of child restrai nt systems 3 on the sea ts in the third row ISO -FIX child safety seats fa cing the rea r of the v ehicle m ust not be fitted to sea ts in the third seat row – see following pages. Use of chil d restraint syst em s 3 on front passeng er seat in vehicles with a irbag system s 3 and with seat occ upancy rec ognition 3 O nly Vaux hall child restraint sy stems with tra nsponders 3 can be fitted on the front passenger seats. Use of sy stems without transpond ers poses a d ang er to life.
Note z Children under 12 yea rs or under 150 c m ta ll should only travel in an app ropriate child safety seat. z When transporting children, use the child restraint systems suitable for the child's weight. z Ensure that the child restraint system is fitted correctly. z Only allow the child to enter and ex it on the sid e of the vehicle fa cing away from the road. z The cov ers of the safety cradle and safety seat can be wiped clean.
Child restraint sys tem , Vauxhall child s afety cradle 3 without transponders For babies ag ed up to 10 months or weighing up to 10 k g. In vehicles with front passenger a irba g 3 or side airbag 3, the safety cradle must not be fitted on the front pa ssenger seat; danger to life. In this case, fit the sa fety cradle on one of the outer sea ts in the second row or on one of the seats in the third row. 108 Fastening t he chi ld's seat b el t Plac e child in safety cradle.
To adjust height, pull both shoulder belts towards rear through slots. Then guid e belts through slots in required position. Securing in the v ehic le Move child safety cradle ca rry ing handle to up right position. Alw ays place child safety cradle on one of the outboard rear seats fa cing away from the direction of trav el and fasten seat belt. Move upp er anchorage point of vehicle seat belt to lowest position 3 – see page 90. O pen clip on rear of safety cradle to side.
Child restraint sys tem : V auxhall safe ty cradle with transponders 3 For babies ag ed up to 10 months or weighing up to 10 k g. The Vauxhall safety cradle with transponders 3 can be identified by a stic ker on the safety cradle – see page 106. Do not fit a child restraint sy stem on the front passenger seat if the v ehicle is equipped with front passenger airbag 3 or side airb ags 3, but d oes not have seat occ upa ncy rec og nition 3. Otherwise, there is a risk of fatal injury.
To adjust height, pull both shoulder belts towards rear through slots. Then guid e belts through slots in required position. Securing in the v ehic le Raise carrying handle of safety c ra dle. Alw ays p la ce the safety cradle on the front passenger seat with the belted child fac ing away from the direction of trav el, as shown in the illustration. Ad just seat b ackrest as described on page 94. Move upper anchorag e point of vehicle seat belt to lowest position – see pag e 90.
O pen clip on rear of safety cradle to side. Route the diagonal part of the vehicle seat belt around the back of the safety cradle back rest through the op en clip. Tig hten vehic le seat belt and close clip. To disengage c arry ing ha ndle, press down and swivel in direction of vehicle sea t back rest.
Child restraint sys tem , Top Safe with ISO -FIX attachm ent, Weight class 0 with carrying cradle 31) : from birth to 6 kg. Fit to one of outboard sea ts in second seat row facing aw ay from direction of trav el using I SO -FIX fastening. 1) Securing in the v ehic le Engage provided p ush-in sleev es in IS O-FIX retainers between seat back rest and seat cushion as shown in illustration. Pull yellow handle at rear of child safety seat console until both attachment struts are fully ex tended.
Align child safety seat and simulta neously slid e b oth extended sec uring struts into push-in sleev es until they audibly latch into position. Inspection windows at front of seat c onsole indicate correct lock ing (deta ils in figure). Check that seat ha s engaged by pulling. 114 Rota te top fastening brack et of provided floor support by 90°. Push in rear pins of fa stening b ra ckets and insert into seat console g uides until front pins engage.
Fasteni ng the child's sea t belt Place child in carrying crad le. Fit carrying cradle flaps over child’ s la p using Velc ro stra p. Place carrying cradle in child safety seat facing awa y from direction of trav el. Guide belt buckle at front of seat console through openings in child safety seat and carrying cradle. Guide child safety seat shoulder belts through bottom guides in b ackrest and through slits in hea d area of carrying cradle towa rd the outsid e.
To ad just seat belt length, push m etal plate on back of child sa fety sea t backrest a nd tighten or slacken free end of belt. Unbelt t he chi ld To slacken seat belt, press red button at child safety seat belt buckle and pull shoulder belts out of carrying crad le guides. Remove child in carrying cradle from child safety seat. 116 Rem oving t he safety sea t Remove child from c hild safety seat. Push pins of floor sup port fa stening brackets and pull support out of guides.
Remove push-in sleev es between seat cushion and b ackrest, since otherw ise the padd ing could be da maged when the seat back rests are tilted forwa rd . Child restraint system, Top Safe with ISO-FIX mounting, We ight class 0+: from birth to 13 kg Securing in the vehicle Eng age provided push-in sleeves in ISO -FI X mounting s between seat b ackrest a nd seat cushion as shown in illustration. Fit to one of outboard seats in second seat row facing away from direction of travel using IS O-FIX fastening.
Pull yellow ha ndle at rear of child safety seat c onsole until both attachment struts are fully ex tended . Place child safety seat on one of outboard seats in second sea t row facing awa y from direc tion of travel. 118 Align c hild safety seat a nd simultaneously slide both ex tended securing struts into push-in sleeves until they audibly latch into position. Inspection windows at front of seat console indicate correct locking (d etails in figure). Check that seat has enga ged by pulling.
Pull bottom locking pin at floor sup port and ex tend foot to floor of vehicle. Engage locking pin. Fastening t he chi ld's seat b el t Plac e child in safety seat. Guide front belt b uck le at seat console through opening in child safety seat – see details in Fig . 14077 J. Guide shoulder belts of child safety seat through lower or upp er bac krest guides depending on size of child. Route seat belt suc h that belt does not exit below c hild’ s shoulder level.
Remove push-in sleeves between seat cushion and backrest, since otherwise the pad ding could be damaged when the seat bac krests are tilted forw ard. Remov ing the safety seat Remove child from child safety seat. Push pins of floor support fastening brackets and pull sup port out of g uides. Rotate both fa stening b ra ckets inward b y 90° to store away. 120 Pull y ellow handle at front of seat console and release child safety seat from IS O-FIX mountings. Remove child safety seat from v ehicle.
Child restraint sys tem , Top Safe with ISO -FIX m ountings , Weight class I: from 9 kg to 18 kg Fit to one of outboard sea ts in second seat row facing d irection of travel using IS O-FIX fastening . Conversion from w ei ght cla ss 0 or 0+ to weight cl ass I Remove child safety seat as describ ed on pages 116 and 120. Guide both shoulder b elts through the bac krest as shown in the illustration, push latch plates together a nd insert into brack et at back of child safety seat.
Push both sliders together on cross strut beneath seat a nd tilt front cross strut upwards out of seat console guide rails. 122 Pull front clip on child safety seat and relea se rear fram e from seat console. Push seat backw ard on console and turn by 180°.
Pull front clip on c hild safety seat, insert rea r fra me into recess in seat console and enga ge in front position. Push both front sliders beneath seat tog ether and insert and engage cross strut in recesses at front of seat console. Securing in the vehicle Eng age provided push-in sleeves in ISO -FI X reta iners between sea t backrest a nd seat cushion as shown in illustration.
Pull yellow ha ndle at rear of child safety seat c onsole until both attachment struts are fully ex tended . Place child safety seat on one of outboard seats in second seat row facing d irection of travel. 124 Align c hild safety seat a nd simultaneously slide both ex tended securing struts into push-in sleeves until they audibly latch into position. Inspection windows at front of seat console indicate correct locking (d etails in illustration). Check that seat has enga ged by pulling.
Pull bottom locking pin at floor sup port and ex tend foot to floor of vehicle. Engage locking pin. Fastening t he chi ld's seat b el t Plac e child in safety seat. Fit safety table to child sa fety sea t in suitable position. Tighten belt by pulling on free end. S afety table must lie firmly against child sa fety seat. First click provided individual belt into a belt buck le on the child safety seat.
Adj ust child safety seat Pull loop at front of seat and pull child safety seat on seat console forward at same time (sleeping position) or push back ward (sitting p osition). Release loop after adjusting. Unbelt t he chi ld To slacken, push red buttons at child sa fety seat b elt buckles and rem ov e safety table. 126 Rem oving t he safety sea t Remove child from c hild safety seat. Push pins of floor sup port fa stening brackets and pull support out of guides.
Child restraint sys tem , Top Safe child safety s eat without ISO-FIX mountings, with transponders Modular system for v arious weight rang es: z Weight class 0 with carry ing cradle1 ): From birth to a weight of 6 kg. Always install facing way from direc tion of trav el. 1) Weig ht cla ss 0 is d efined up to 10 kg, bu t only up to 6 kg in com bina tion w ith the carrying crad le. z Weight class 0+: From birth to a w eight of 13 kg. Always install facing away from direction of trav el.
Securing in the vehicle Place child sa fety seat on one of seats in second row or front passeng er seat fac ing away from direc tion of travel and p ush right back against backrest. Pull la tc h pla te of vehicle safety belt out of retractor and click into relevant b elt buckle. 128 Guide lap belt of v ehicle safety belt through both guid es beneath shell of child safety seat and pull tight.
Fasteni ng the child's sea t belt Place child in separate carrying crad le 3 . Fit carrying cradle flaps over child ’s lap using Velcro strap. Place carrying cradle in child safety seat facing awa y from direction of trav el. Guide belt buckle at front of seat console through openings in child safety seat and carrying cradle. Guide child safety seat shoulder belts through bottom guides in b ackrest and through slits in hea d area of carrying cradle towa rd the outsid e.
Unbelt the child To slack en belt, press red button on child safety seat belt buckle and ta ke should er belts out of carrying cradle guide. Remove child in ca rry ing cradle from child safety seat. Remov ing the safety seat Remove child from child safety seat. Press red button on vehicle safety belt buckle, remove belt from guid es at bac k, side and beneath seat shell of child safety seat and allow belt to reel in. Remove child safety seat from vehicle.
Child restraint sys tem , Top Safe without ISO-FIX mountings, Weight class 0+: from birth to 1 3 kg Securing in the v ehic le Plac e child safety seat on one of seats in second row or front pa ssenger seat facing away from direction of travel and push rig ht b ack ag ainst bac krest. Fit to one of the seats in second seat row or front passenger seat facing away from direc tion of travel using vehicle seat belt.
Pull shoulder belt of vehicle safety belt ov er back of child safety seat and lead through outer slit in backrest running in direc tion of travel. Then guide shoulder belt b eneath b elt buckle integrated to inside of child safety seat a nd pull tight. Fastening t he chi ld's seat b el t Plac e child in child sa fety seat facing away from direction of travel. Guide belt buckle from seat console through opening in child safety seat.
Remov ing the safety seat Remove child from child safety seat. In vehicles without seat occupancy detection 3 but with side airbag 3, no child restraint sy stem may be fitted on the front passeng er seat; risk of fa ta l injury. Press red b utton on vehic le safety belt buckle, remove belt from g uides at back , side a nd beneath seat shell of child safety seat a nd allow belt to reel in. Remove child sa fety sea t from vehicle.
Conv ersion from weight c lass 0 or 0+ t o weight class I Remove child sa fety sea t as described on pages 130 and 133. Insert child safety seat belt buckle into holder on seat console. 134 Guide both shoulder belts throug h backrest as shown in illustration and put both la tch plates together and insert into retainer a t rear of child safety seat. Push sliders together on cross strut beneath seat a nd remove front frame from seat console g uide rails.
Pull clip at front of child safety seat and release frame from seat console a t rear. Push seat ba ckward on console and turn by 180°. Pull front c lip on child sa fety sea t, insert rear frame into recess in seat console and eng age in front position.
Push sliders together beneath seat at front, insert cross strut into recesses at front of seat c onsole and engage. Fastening t he chi ld's seat b el t Plac e child safety seat on sea t fa cing direction of travel and push right b ack against b ackrest. Plac e child in safety seat. Insert latch p la te of vehicle sea t belt in buckle. Fit safety table into recesses in child safety seat. Tighten belt sy stem by pulling on shoulder belt.
Unbelt the child Press red button on vehicle sa fety b elt buckle, remove belt from guide and remove safety table. Remov ing the safety seat Unbelt child and remove from child sa fety seat. Remove child safety seat from vehicle. Adj ust child safety seat Pull loop at front of seat and pull child safety seat on seat console forward at same time (sleeping position) or push back ward (sitting p osition). Release loop after adjusting.
Child restraint sys tem , Vauxhall child restraint seat 3 without transponder Modular system for v arious weight rang es: z Weight class I: for weight of 9 kg to 18 kg; it is ad visa ble only to use weight class I for weights of 11 kg a nd above. Always install facing direction of travel. 138 z Weight class II: for w eight of 15 kg to 25 kg . Always install facing direction of tra vel. z Weight class III : For weight of 22 kg to 36 kg . Always install facing direction of tra vel.
Child restraint sys tem : Vauxhall child s afety seat 3 , Weight range I: 9 kg to 18 kg 1) Fastening t he chi ld's seat b el t Alw ays fit child safety seat fa cing direction of trav el. When fitting to front passenger seat, slide seat as far back as possible. When fitting to front pa ssenger seat, slide seat a s far b ack as possib le. Plac e child in safety seat. On vehicles w ith side airbag s 3 , no child restraint system may be fitted on the front passenger's seat; danger to life.
Child restraint sys tem : Vauxhall child s afety seat 3 , Weight range II: 15 kg to 25 kg Fastening t he chi ld's seat b el t Alw ays fit child safety seat fa cing direction of trav el. When fitting to front passenger seat, slide seat as far back as possible When fitting to front pa ssenger seat, slide seat a s far b ack as possib le. Plac e child in safety seat. On vehicles w ith side airbag s 3 , no child restraint system may be fitted on the front passenger's seat; danger to life.
Child restraint sys tem : Vauxhall child s afety seat 3 , Weight range III: 22 kg to 36 kg When fitting to front pa ssenger seat, slide seat a s far b ack as possib le. On vehicles w ith side airbag s 3 , no child restraint system may be fitted on the front passenger's seat; danger to life. The safety seat for weight range I II is a lso ava ilab le as a separate sy stem. S ee third column for details on its use.
He ad res traints Safety acce ssorie s 3 Do not mount any ob ject or com ponent on the head restraint unless it has been specifically released for y our vehicle for this purp ose. They impair the protective prop erties of the head restraint and c ould be thrown forward throug h the vehicle in the ev ent of heavy b ra king or a n ac cident. The wide ra nge of Vauxhall accessories allows you to equip your vehicle in acc orda nce with your own wishes.
Lighting Exte rior lights Fog lights > 3 Turn light switch: O n = Press > O ff = Press > ag ain or switch ignition off 7 = O ff 8 = Parking lights 9 = Dipp ed or m ain beam Dip ped beam , main b eam and head lig ht flash - see pag e 15. In positions 8 and 9, the tail lights a nd numb er plate lights are also lit. Vehicles with daytime running lig hts 3: With the ignition on and the light switch at position 7 the d ipped beam is switched on without instrument illum ination.
Headlight range adjustm ent ? Manual hea dlight range adjustm ent 3 Adjust headlight range to four stages of vehic le load ing with dipped beam switched on: Turn k nurled wheel to d esired position. Correct adjustment of the headlight range red uces dazzle for other road users.
Courtes y light 0 Front reading lights 3 Com es on w hen a door is op ened. O nce the door has been shut it g oes out immediately , after a certain delay 3, or when the ignition is turned on 3 . With ignition switched on: To keep the courtesy light on, pull the light switch.
Glove com partm ent lighting Glove c om partment is illuminated when lid is open and ignition on. Cigarette lighte r and as htray illumination 3 Lights up w hen ignition is switched on. Luggage compartment lighting Com es on when tailgate is opened. Autom atic s hut-off of electrical consumers 3 Some consum ers such as the interior lighting sw itch off after 30 m inutes if the ignition is switched off, to prevent the battery from discharging.
Windows, sun roof C are must be taken w hen operating the electric windows 3, tilt / slide sun roof 3 and sky lig ht roof 3 . There is a risk of injury , particularly for children, and a danger that articles could become trapped. Vehicle passeng ers should be inform ed accordingly. If there are children on the rear seat, switch on the child safety sy stem 3 for the elec tric wind ow s. K eep a close watch on the windows, tilt / slide sun roof a nd skylight roof when closing them.
Ele ctric windows 3 O peration with ignition switched off. Two or four rocker switches in handle on driver's door: Upper switches for front windows, lower switches 3 for rear windows. Additional rocker switches in handle on front passenger door a nd in rear doors 3. Control ind icators in the switches show the opera tional status. To op erate window in sta ges, tap switch. For automatic opening or closing, keep switch pressed for slightly longer; to stop wind ow movement, ta p switch again.
Interrup tion of power suppl y Autom atic opening and closing of the windows is not p ossible a fter interruption of the p ow er supply or a drop in battery voltage. Activ ate the window electronics as follow s: O verload If the sy stem is overload ed, the power supply is automatically cut off for a short time. The sy stem is protected by a fuse in the fusebox – see page 228. 1. Close doors. 2. Switch on ignition. 3. Close window and hold down roc ker switch for at least another 5 seconds. 4.
To raise: Close the sun roof and press button \. To lower: Press button l until the sun roof is closed. Sun sha de The sun shade can be opened and c losed with the sun roof either closed or raised . When the sun roof is opened, the sun shade is a lso opened. Front tilt / slide sun roof 3 O peration with ignition switched off. For buttons l and \ between the sun visors, buttons in version with rear sky light roof, see next page. To open: Press b utton l .
Fault The system is protected by a fuse in the fusebox – see page 228. Until fault is rem edied, operate roof as follows. Re ar skylight roof 3 Slide drive cover toward rear. Push in spring-load ed centre pa rt of drive shaft using screwdriver and rotate driv e shaft until sun roof is closed . To raise: Press button \. Ca r tools - see pag e 217. Operation with ig nition switched off. Buttons \ and w between the sun visors. To lower: Press button w until skylight is closed.
Heating and ventilation He ater controls Heating and ventilation sys te ms Air mixture system: By mixing cold and hot air the temperature ca n be regulated without delay . 152 Left-hand rotary switch: Temp er ature To the right = Hotter To the left = Colder C entre rot ary sw itch: Fan Four speeds: x Off 4 Maximum airflow The ra te of airflow is determined by the fan. The fan should therefore also be switched on d uring a journey .
Rig ht -hand rota ry swit ch: Air d istributi on V To the windscreen and front door windows J K L M To the windscreen, to front door windows, to front and rear footw ells To front and rear footwell To head area abov e ad justable air vent a nd to front and rear footwells To headroom via adjustable air vents O pen the air vents w hen the switch is set to L or M.
Centre air ve nts Side air vents 1 Rear air vents Pleasant ventilation to head area with unheated or slightly warmed air, depending on the position of the tem perature sw itch. When the temp erature switch is set in the mid position, cooler air flows from the centre air vents than from the side vents. Unheated or heated air can be led into the vehicle through the nozz les. Unheated or heated a ir is led into the vehicle. The vents are opened by means of the regulating wheel.
He ating The amount of heat is dependent on the coolant temperature and is thus not fully attained until the engine is warm.
Window de misting and de frosting Failure to com ply with the descriptions can lead to misting of the windows and therefore a ccidents caused b y poor visibility.
Air conditioning system The ventilation, heating and cooling sections ma ke up a functional unit designed to prov ide maximum comfort at all times of y ear, under any weather conditions and at any outside temperature. The air is cooled and dried when the air conditioning is sw itched on. The heating unit heats the air a s required in all operating m od es depending on the position of the temperature switch. The air supply can be adjusted to suit requirements by means of the fan.
Heate r controls Left -hand rota ry swit ch: Temperature To the right = Hotter To the left = Colder Centre rotary switch: Fan Four speeds: x O ff 4 Max imum airflow The rate of airflow is determ ined by the fa n. The fan should therefore a lso be switched on during a journey.
Air re circulation system 4 Cooling n Air intake The a ir circulation switch 4 switches the air conditioning sy stem to air circulation mode (control indicator). Switch n activates the cooling compressor of the air conditioning system. The air intakes in front of the windscreen on the fa r left and right-hand sides of the eng ine compartm ent must be kept free of leaves, dirt and snow. If fumes or unpleasant odours penetra te from outsid e: temporarily switch on air circulation 4.
Centre air ve nts Side air vents 1 Rear air vents Dep ending on the temperature switch setting, the head area is pleasa ntly ventilated with cooled, unheated or slightly warmed air. Cooled, unhea ted or heated air can be led into the vehicle through the nozzles. C ooled, unheated or hea ted air is led into the vehicle. The vents are opened by means of the regulating wheel. With the wheel in position 7 they are closed. The air volume can be adjusted using the regula ting wheel.
z Air c irculation system 4 off. Maximum c ool ing (M axim um Air Conditioning) Open w indows briefly so that warm a ir ca n escape rapidly. z C ooling n on. z Temperature switch: as req uired. z Air circulation sy stem 4 on. z Fan: As required. z Turn temperature switch anticlockwise as far as it will g o (c old ). Operation of the system Conv enience set tings z Cooling n as required. z Air d istribution switch set to L or K. z Open vents as req uired.
De-icing t he w indows z Cooling n off. z Temperature switch: As required . z Fan: As required. z Air d istribution switch to V, air recirculation system 4 automatically switches itself off. z Direct the side air vents onto the door wind ows. O peration with cooling (cooling compressor) is not possib le at low outside tem peratures. 162 Additional cooling for passe ngers in rear 3 Switch on rear passenger cooling if required (a dditional to air conditioning): the air in the rear is cooled and dried .
Rear pa ssenger cooling z The rear passenger cooling c an only be switched on if the air conditioning is also on: Pushbutton z above heater switches (sw itc h-on control). Air is drawn in and fed to the passenger compartment via a ir vents in the roofliner. When the cooling is switched on for passengers in the rear, the fan runs at low speed but can b e switched to a faster speed if required. Rear passeng er cooling will only operate if the engine is running.
Air vents in the roofliner ab ove the second row of seats Unheated a ir flows into the interior through the v ents, and will b e cooled if the c ooling system for rear passengers is sw itched on. O pen and close the vents by turning them. The a irflow ca n be directed as desired by tilting and swivelling the fins. To increase the air supply, set the fan to a higher speed. 164 He ated rear window, heated ex terior mirrors 3 Pushbutton Ü beneath the heater controls.
Important The rear air conditioning and cooling systems only operate with the engine running. Condensation forms when the rear air conditioning or c ooling system is switched on, and is expelled from the und erside of the v ehicle. When the air cond itioning or rea r cooling system is sw itched on, at least one air vent must be open so that the eva pora tor does not ice up due to la ck of air mov ement.
Electronic air conditioning system Ele ctronic air conditioning system 3 The system provides m aximum com fort in any w eather, at any outside temperature and during any season. To ensure a constant and com fortable climate in the v ehicle, the tempera ture of the inflowing air, the air-flow rate a nd the air distrib ution are cha nged automatically according to clim atic conditions outside the v ehicle.
Pre-selected temperat ures The preselected temperature can be set to values between 16 °C and 28 °C using the left-hand rota ry knob. For the sak e of comfort, only cha nge the pre selected temp erature in small step s. If a temp erature b elow 16 °C is set, LO app ears in the display : The electronic air conditioning sy stem constantly runs with ma ximum cooling. The temp erature is not regula ted.
The airflow can be directed a s d esired b y tilting a nd swiv elling the fins. Ad ditional air outlets a re loca ted in front of the windscreen, in front of the door wind ow s a nd in the front and rear footwells. Manual settings Under certain circumstances (e.g. iced-up or misted-up w indows), the functions of the electronic air conditioning system can be influenced manually. Manual settings are stored when the ignition is switched off.
Demisting a nd defrosting t he w indows Failure to com ply with the descriptions can lead to misting of the windows and therefore a ccidents caused b y poor visibility. Press button V . V app ears on the display. The temperature, air d istribution and fan are set automa tic ally, windows are quickly demisted and de-iced To return to automatic m od e: Press button V or AUTO. Hea ted rear wi nd ow, heat ed exterior m irrors 3 Press button Ü. Ü a ppears on the display.
Air d istributi on Press one or more of the following b uttons. The corresponding symbol appears on the display: s: Air distrib ution to windscreen and front sid e windows. M: Air distrib ution to vehicle occupants via adjustable air vents. K: Air distrib ution to front and rea r foot a rea. To return to automatic m od e: Press the app ropriate buttons ag ain, or press AUTO . Airflow Turn the rig ht-hand rotary knob clockwise or anticlockwise. The airflow is increased or reduced as appropriate.
Air conditioning with the engine not running Switching off the electronic air conditioning system Heated front seats 3 When the vehicle is stopped and the ignition off, the heat or cooling p ower still in the system can be used to cond ition the passenger com partment, for exam ple when stopped at a level crossing. Turn the rig ht-hand rotary knob clockwise as fa r as it will go. The disp lay readout disap pears. The air distribution setting remains at the position last selected.
Additional cooling for pas senge rs in rear 3 Switch on rear passenger cooling if req uired (additional to electronic air conditioning system ): The air in the rear is cooled and dried . The a ir supply can be adjusted to req uirements using the fan. Cooling switch z and k nurled wheel for fan x above electronic air conditioning controls. Ad ditional k nurled wheel for fan x in rear roofliner.
Fan switch i n inst rument panel Knurled wheels x a bove electronic air conditioning system controls. Fan sw itch in rear roofl iner Knurled wheel x in the roofliner above the second seat row. 0 O ff; with rear passenger cooling switched on the fan autom atically runs at setting 1. 0 R In this position, the fa n speed can be selected using the k nurled wheel in the rear roofliner. 1-3 Higher fan speed. 2-3 Higher fa n speed .
Air intake The air intakes in front of the wind screen on the far left and right-hand sides of the engine compartment must be k ept free of lea ves, d irt and snow. Air outlet Do not cover over the air outlets when storing items in the luggage compartment storag e comp artments. 174 Polle n filter General information The pollen filter cleans the air entering from outside and filters dust, soot, pollen and spores from the interior air if the air recirculation sy stem is active.
Mainte nance In order to ensure continuously efficient performance of the electronic air conditioning system it must be switched on once a month for a few minutes, irrespec tiv e of the wea ther and time of year, with the cooling (cooling c om pressor) opera tional. If a fa ult occ urs in the electronic air conditioning system , consult a workshop. We recommend a Vauxhall Authorised Repairer. The system’s integrated selfdiagnostic s a llows faults to be quic kly rem edied.
Automatic transmission After sta rting the engine, press brake pedal before selecting a gear. After a gear ha s been selected and the brake p edal has been released, the vehicle "creeps". Never op erate accelerator and brak e at sam e tim e. Disregard of these instructions may lead to injuries or endanger life. Once D has been selected, the economy driving p rogra mme is operative. Position D is g enerally ideal for d riv ing.
z Tra nsmission automatically selects neutral (N) to red uce fuel consumption, e.g . when stopped at traffic light. Gears D, 3, 2, 1 D Driv e position for normal d riv ing conditions in first to fourth g ear. Automatic neutral selection is activated if: – selector lever in D, 3, 2 or 1 and – park ing brake is op erated and – vehicle is stopped and – acc elerator pedal is not opera ted. 3 Driv e position for d riv ing cond itions in first, second a nd third gear.
Engine braking assistance from motor In order to utilize the engine braking effect when d riv ing downhill, select gear 3, 2 or if nec essary , 1 in good time. The braking action is most effective in gear 1. If gear 1 is selec ted at too high a speed, the transmission remains in second gear until the shift p oint for first gear is reached, e.g . as a result of deceleration.
Stopping the ve hicle The selector lever can be left in the chosen gear with the engine running. When stopping on gradients, engage handbrake or depress brake ped al. To prevent overheating of the tra nsmission, do not increa se engine revolutions to ensure smooth idling while standing if a gear has been selected. S witc h off engine if stopping for a leng thy period , e.g. in traffic jams or at level crossings.
The transm ission no longer shifts autom atic ally. Driv ing can be continued. Second gear is not a vailable. Engag e first, third or fourth gear m anua lly using selector lev er: 1 2 3 D N R P Fault Control indicator A illuminates when the ignition is switched on. If it does not go off after starting or comes on whilst driving, there is a fault in the automatic transm ission or the engine electronics.
Re-selecting P locks the selector lever again. Hav e c ause of power supply interruption remedied. We recom mend that you consult a Vauxhall Authorised Repairer. 4. Push catch forward with a screwdriver and move selec tor lever out of P. 5. Mount selector lever trim on centre console a nd refit. 6. Refit cover on centre console below handb ra ke.
Driving hints Many units w ill not function in this situation (e.g. brake servo unit, electro-hydraulic power steering). Driving in this ma nner is a danger to y ourself a nd others. Diesel engine: On rising gradients of 10 % or more, do not drive faster than 20 mph (30 km/h) in 1st gear or 30 mph (50 km /h) in 2nd gear; with automatic transmission 3, do not exceed 25 mph (40 km/h) in position 1.
Save energy – more miles Engine s pe ed Clutch operation Please observe the running-in hints on the previous pag e and the tips for energ y saving on the following pages. Driv e in a low engine speed range for each gear a s m uc h as possible. Alway s d epress the c lutch pedal hard to the floor to p revent shifting difficulties and transmission damage. Good, technica lly correct and economical driving ensures ma ximum durability and performance for your vehic le.
Save fuel, protect the environment New painting techniques employ wa ter as a solv ent. End-of-life ve hicle recovery Information on end-of-life vehicle recovery centres and the recy cling of end-of-life vehicles is availab le at ww w.vauxhall.co.
Overrun z The fuel supply is automatically shut off during ov errun, e. g. when the vehicle is being driven down long gradients or when braking – see page 183. z To enable the overrun cut-off to take effect a nd sav e fuel, during overrun do not ac celera te and do not declutch. Corre ct gear selection z High revs increase engine w ear and fuel consumption. z Do not race your engine. Avoid d riv ing at high engine speeds. Driv ing with an ey e on the tachom eter saves fuel.
Fuel consumption, fuel, refuelling Fuel for petrol e ngines Fuel for diesel engines Commercially av ailable high-quality fuels are suitable (ca talytic converter – see page 188, octane numb ers – see page 263). Fuel quality has a decisive influence on the power output, running behaviour and serv ice life of the engine. The additives contained in the fuel play an important role in this regard. You should therefore only use high-q uality fuels containing add itiv es.
C orrect filling depends to a large extent on proper operation of the fuel disp ensing pump: Refuelling Care must be taken when handling fuel. Before refuelling , switch off engine a nd any ex ternal hea ters with combustion cha mbers before refuelling. Switch mobile phones off. 1. Fully insert the pump nozz le and switch it on. 2. After the automatic cut-off, the nominal capacity of the tank ca n be obtained by top ping up with two doses of fuel. Make sure the nozzle is fully inserted.
Catalytic converter, exhaust gases Dama ge to the catalytic conv erter or the vehicle m ay result if the following points are not observed : z Consult a work shop, such as a Vauxhall Authorised Repairer, as quickly as possible in the event of misfiring, irregular engine running following a cold start, a significant loss of engine power or other unusual malfunctions which may indica te a fa ult in the ignition sy stem.
z If the emission control indicator Z flashes, slow down until the flashing stops and the c ontrol indicator is lit with a steady glow. C ontact a workshop im med ia tely. We recomm end a Vauxhall Authorised Repairer. Emission control indica tor Z – see page 190.
Flashing with the engine running indicates a fault that may damage the catalytic conv erter. You can continue to drive without causing damage by slowing down until the fla shing stop s and the control indica tor is stead y. C onsult a workshop immed iately. We recommend tha t you consult a Vauxhall Authorised Repairer. Cont rol indica tor Z for exhaust Lights up when ignition is switched on a nd rem ains illuminated during starting. Goes out shortly a fter engine starts.
If it lights up briefly and then goes out again this is of no significance. If it flashes w hen the ignition is on there is a fault in the imm obiliser sy stem – see pa ge 59. Exhaust gas es – avoid inhaling! Engine exhaust gases contain poisonous carbon monoxide, which has no colour or odour and can b e fatal if inhaled. If exhaust fumes penetrate the vehicle interior, open the windows and consult a workshop immediately . We recommend that you consult a Va ux hall Authorised Repairer.
Drive control systems The TC is ready for operation as soon as the ignition is switched on and the control indica tor v goes out. When TC is operating, v flashes. The vehicle is now in a critica l situation; the TC allow s you to keep control of the v ehicle and rem inds y ou to m atch your speed to the road conditions. Do not let this special safety fea ture tempt you into ta king risks when d riv ing. Traffic safety c an only be achieved by adopting a responsible driving style.
Lit during driving: Fault in ES P sy stem. Vehicle can continue to b e driven. Howev er, driving stability may worsen depending on ty pe of road surface. Ele ctronic Stability Program me (ESP ) 3 The ESP (Electronic Stability Program me) improves driving sta bility when necessary, independently of the type of road surfa ce and the tyre grip in a ny driving situation. It also includes the Traction Control system (TC) function. The system monitors vehicle m ovements.
Reduce With cruise control a ctiv e, hold down button R or tap it repeatedly: The speed is reduc ed c ontinuously or in steps. Cruis e control 3 The cruise control mak es it possible to store and m aintain a ny sp eed from approx. 20 mph (30 k m/h) to almost max imum speed. The current speed is stored and sa ved after the R button ha s b een relea sed. For safety reasons, the c ruise c ontrol cannot be activated until the foot brake has been activated once.
Towi ng eq uipment, c arav an / trailer tow ing If towing eq uipm ent is fitted to the vehicle, the sy stem must be set to the a ppropriate vehicle length. We recommend that you contact a Vauxhall Authorised Repairer. Parking distance se nsors 3 The parking distance sensors mak e reverse parking easier by measuring the distance between the rear of the vehicle a nd an obstacle through ultrasonic reflection a nd warning you with an a coustic signal in the passenger com partment.
Brakes Brake system The efectiveness of the brakes is an important fa ctor for traffic safety . To improve effectiveness, do not brake unnec essarily ha rd for the first 125 miles (200 km) after new brak e p ads ha ve been fitted. Brake pad wear must not ex ceed a specified lim it. Reg ular maintenance as detailed in the S ervice Booklet is therefore of the utmost im porta nce for traffic sa fety. Have worn brake pads replaced.
With the engine stopp ed the servo assistance is discontinued after the brake pedal has been depressed once or twice. The brak ing action will not be reduced but increased foot pressure will be necessary. Take ex tra care when the vehicle is being towed . Check the brake lights b efore starting out on a journey. On v ehicles with check control 3 the brake lights are check ed automatically – see page 48.
ABS u The Anti-lock Brak e S ystem (ABS ) 3 continuously monitors the vehicle’s brake system a nd prevents the wheels from locking regardless of roa d condition and tyre grip. It starts to regulate the braking p ressure as soon as a w heel shows a tendency to lock. The v ehicle remains steera ble, even in the event of very heavy braking, for instance on bends or when sw erving to av oid an obstacle.
If there is a fault in the ABS , the rear wheels may tend to lock in the event of unusually heavy braking. This may cause the vehicle to swerve. The benefits of the ABS are lost. Y ou can continue driving, provided y ou drive with care and anticipation. Hav e the cause of the fa ult remedied. We recommend that you consult a Vauxhall Authorised Repa irer. The sy stem’s integrated self-diagnostics allows faults to be quickly remedied .
Wheels, tyres Tyre s See pag e 270 for suitable ty res and restrictions. Factory-fitted tyres are matched to the cha ssis and offer optimum d riv ing c om fort and safety. Changing tyre / wheel type Before c hanging to ty res or wheels of a different size, seek advice as regards technical possibilities. We recommend that you consult a Vauxhall Authorised Repairer, who will be awa re of any necessary changes.
Tyre inflation pressure Check ty re pressures, including the spare wheel, at least ev ery 14 day s and prior to any long journey; the ty res should be check ed when cold. Don't forget to check the spare. Use the v alve cap key to make unscrewing the valve caps easier. The key is located on the inside of the tank flap. Tyre pressure, see page 270, and the adhesive foil beneath the fuel tank flap; have a dhesiv e foil replaced after changing to different tyre size.
z Never fit used tyres the previous history and use of which you do not k now z So as not to impair b ra ke cooling, use only wheel covers ap prov ed for use on your vehicle Tyre d esigna tions Meaning s: e.g. 195/65 R 15 91 H Tread dept h Check tread depth regularly. Should the front tyres show greater wea r than the rear tyres, have both front wheels ex cha ng ed with the rear wheels so that the tyres w ith deeper tread are on the front ax le.
Wheel trims on steel wheels ma y come into contact with parts of the cha ins. In such cases, remove the wheel covers – see pag e 220. Winter tyre s For notes on fitting new tyres - see page 200. See page 270 for restric tions. Tyre cha ins may only be used at sp eeds up to 30 mph (50 km/h) and, when trav elling on roads that are free of snow , they m ay be used for brief periods only since they are subject to rap id wea r on a hard road a nd ma y sna p.
Roof racks, caravan and trailer towing Towing equipment 3 If the v ehicle is not equip ped with tow ing equipment, we recommend having it retrofitted by a Vauxhall Authorised Repairer, who will provide information about possible trailer load increa ses. The Vauxhall Authorised Repairer has instructions on how to install the towing equipment a nd any modifications that are required to the vehicle that affect the cooling system or other equip ment.
To open the c om partment, lift carpet, turn metal ring and pull – see page 216, Fig. 14530 T. Fit ting the coupl ing bal l bar Remove the cover for the bumper cutout: Push the two slider catches in towards the middle of the vehicle and rem ov e the cover downwards. Remove the sea ling plug from the hole for the coupling ball bar. Store both items awa y in the lugg age com partment.
Checking the tensioning of the c oupling ball b ar: z Red m arking on rotary knob p oints towa rd s w hite marking on coupling ba ll bar z Gap of approx. 4 millimetres between rotary knob and coupling ball bar z Key is in lock at p osition 1 Otherwise, the coupling ball bar must be tensioned before it is inserted into the coupling housing: z Unlock coupling ball bar (key to position 1 – see Fig.
Imp or tant Check that the coupling ball bar is correctly attached: z Green marking on rotary knob points towards white marking on coupling ball bar z No gap between rotary knob a nd coupling ball b ar z C oupling ba ll bar must be seated firm ly in coupling housing z C oupling ba ll bar must be locked and key m ust be rem oved Loc k coupling ball ba r (key to position 2 – see page 206, Fig. 12416 T). Remove key and press protective flap into position.
Caravan and trailer loads1) The p ermissible carav an / trailer loads are vehic le-dependent a nd engine-dependent max imum values which must not be exceeded. The ac tual carava n / trailer load is the difference b etween the actual gross weight of the carav an / trailer and the actual coupling socket load with the carava n / trailer coupled.
Coupling s ocket load The c oupling socket load is the load exerted by the carav an / tra iler on the coupling b all. It can be va ried by changing the w eight distribution when loa ding the carava n / trailer. The ma ximum permissible coup ling socket load (75 kg) for the towing v ehicle is indicated on the towing equipment identification plate and in the v ehicle documents. Alway s aim for the m aximum load, particularly in the ca se of heavy carava ns / trailers.
Do not drive ab ov e 50 mph (80 km/h) when using caravans / tra ilers with poor driving stability, a nd the use of a friction-type roll dam per is urgently recomm ended . C heck c aravan / trailer lighting before starting to drive. The fog tail lig hts on the vehicle a re deactivated when towing a carav an or trailer. Do not drive faster than 50 m ph (80 km/h) if possible, even in countries where higher speeds are permitted.
The cooling fan is electrically operated. Its cooling power is therefore independent of the engine speed. If it is necessary to a pply the brakes fully, depress the brake ped al as hard as possible. Since a considerable amount of heat is generated at high engine sp eed s a nd less at slower speeds, d o not shift down when climbing hills whilst the vehicle is still coping with the g ra dient in the higher gea r.
Self-help Diesel fuel system, ble eding Nev er let the tank run dry ! The diesel fuel sy stem is extremely difficult to bleed after running the ta nk dry because of the ex tremely high injection pressure. Consult a work shop. We recom mend a Vauxhall Authorised Repairer. R efuel as soon as possible if control indicator Y illuminates, and refuel immediately if control indicator flashes. Do not start with quick charger This prevents damag e to electronic components.
z Do not d isconnect the disc ha rg ed battery from the vehicle z Do not connect lead s to negative terminal of discharged battery ! z Switch off all unnecessary electrical consumers z The connection point should be as far away from the discharged battery as possible z Do not lean over the battery during jump starting z Route the leads so tha t they cannot catch on rotating parts in the engine compartment z Do not allow the terminals of one lead to touch those of the other lead z Ap ply handbrake.
Towing the vehicle O pen cap covering front right towing ey e: Disengage cap at bottom and pull off downwards. The tow ing eye is with the vehicle tools in a bag in the storage compartment in the floor of the lugg age compartment. To op en the storage compa rtm ent, turn meta l ring and pull. Vehicle tools - see page 217. S crew in the towing ey e anticlock wise as far as it will go a nd use the wheel bolt wrench to tighten it until it is fully horiz ontal. Vehicle tools – see page 217.
Drive off slowly and avoid jerky movements. I mpermissible tractive forces could dam age the vehic les. More brak e pedal pressure is necessary when braking since the brake servo unit is only operative when the engine is running . Considerably m ore force is required for steering: Power-a ssisted steering is only available when the engine is running. To prevent the entry of exhaust fumes from the towing v ehicle, switc h on the air circulation sy stem and close the windows.
First-aid kit + 3 Store the first-aid kit or first-aid cushion in the c om partment on the left in the side trim. To open the cover rota te the fasteners through 90°; to close, fit the cover at the rea r and turn the fasteners all the way back again. 216 When ob jects are stored in the compartments in the side trim, m ake sure the free movement of the seat belts and their automatic retrac tors is not impaired .
Jack £ and ve hicle tools The jack and the vehicle tools are in a bag, stra pped into the left of the storage compartment in the floor of the luggag e compartment with a rubber strap . To open the compartment, lift the carpet at the rear. Rotate and lift the metal ring. To close it, insert the lug s on the front rim of the lid into the recesses a nd lock into place.
Spare w hee l 3 The spare wheel is stored at the rear undernea th the vehicle floor. z Unhook the ca tch and lower the spare wheel z Lift the spa re wheel holder, insert the safety cab le z Deta ch the safety cable z Lift the spa re wheel holder and engag e in the catch. The open side of the ca tc h must p oint in the direction of travel z Open tool storage compartment in lugga ge c om partment floor – see page 216, Fig.
General i nformati on On vehicles with alloy w heels 3 the spare wheel may ha ve a steel rim . If you use winter ty res 3, the spare wheel may still be fitted with a summ er tyre. If you use this spare w heel the vehicle's handling may be a ltered. Ob tain a repla cement for the faulty tyre as soon a s p ossible, and ha ve the wheel balanced and fitted to the vehicle. The spare wheel ma y have a smaller tyre and a sm aller rim: Using the spare wheel ma y cause d ifferent driving behaviour.
Changing whe els In order to reduce the chance of possible injuries, make the following preparations and note the procedure: z Park on a level, firm and non-slippery surface z Switch on hazard wa rning lights and apply handbrak e. Plac e automatic transmission selector lever in position P, or with m anual transm ission engag e first gear or reverse z Correctly set up warning triangle 3.
Alloy wheels 3 : Prise off the hub cap using a screw driver, positioning the screwdriver at the recess at the side of the hub cap. Alloy wheels with anti-theft lock 3 : Release hub cap using key includ ed in vehicle tools and rem ove it. 2. Slacken wheel bolts using a wheel bolt socket wrench, putting socket wrench on as fa r as it will go. Remove wheel bolt ca ps 3 from wheel bolts.
3. Depressions on the lower edge of the vehicle body indicate the points where the jack is to be attached to the underbody. 4. Vehicles with jack shown in figure 8385 T: Before attaching jack, set to req uired height by hand. Fit jack arm a t front and rea r in such a w ay that jack claw (arrow in figure) goes around the vertica l ridge and enga ges into the recess in the ridg e.
5. Unscrew w heel bolts and store them where the threads will not be soiled. 6. C hange wheel. For notes on spare w heel and temporary spare wheel - see pag e 218. 7. Sc rew wheel bolts in and tighten slightly. 8. Lower v ehicle. 9. Tighten wheel b olts in criss-cross sequenc e. Vehicles with jack shown in figure 12548 T: Ad just jack to required height by hand before p ositioning.
Tyre repair kit 3 Minor damage to the tyre tread caused by foreign bodies, for exa mple, can be rem edied using the tyre repa ir kit. Do not rem ov e foreign bodies from the tyres. Damag ed a reas bigger than 4 mm a nd dam age to the walls of the tyres cannot be rep aired using the ty re repair kit. Driv ing w ith ty re pressure that is too low can c ause inv isible damage to the tyres. This damag e cannot be remedied using the tyre repair kit. Park v ehicle and contact a workshop.
3. Remove electric connecting ca ble a nd air hose from storage compartm ents on the underside of c om pressor. 4. Place sealant bottle with hose connections fa cing downward. 7. Screw tyre inflation hose to valv e. 5. Sc rew comp ressor air hose to sealant bottle connection. 9. Connect comp ressor plug to a ccessory socket. Accessory sockets - see page 81. 6. Unscrew d ust cap from defective tyre. 8. Switch on compressor must be set to §.
15. Remove ty re repair kit a nd store in luggage compartment. 16. Remove any excess sealant using a cloth. 17. Put warning tria ng le 3 in storage compartment within lugg age compartment – see pag e 216. 18. Affix enclosed sticker indicating max imum permitted speed in driv er’s field of v iew. 10. Switch on ignition. 11. Move roc ker switch on compressor to I, and tyre is filled with seala nt. 12.
Imp or tant Do not drive faster than 50 m ph (80 k m/h). Do not use for a lengthy period. Steering and ha ndling m ay b e affected. The driving com fort of the repaired tyre is severely affected, therefore ha ve this tyre replaced. If unusual noise is heard or the compressor becomes hot, turn c om pressor off for at least 30 m inutes. If the ty re pressure is ab ov e 19 psi (1.3 b ar), correct to presc rib ed v alue. If the ty re pressure has dropped below 19 psi (1.3 bar), the vehicle must not be used.
Ele ctrical system Elec tronic ignition sy stems use a v ery high v oltag e. Do not touch the ignition system ; danger to life. Fuses A defective fuse can be recog nized b y its melted w ire. A new fuse should only be installed after the cause of the trouble has been rectified. There are two fuseb ox es in the vehicle: O ne in the interior next to the steering column, and one in the front left of the engine compartment, beneath a c ov er.
O nly fuses of the sp ecified rating should b e insta lled. The rating is given on a ll fuses. Fuse colour Grey Light brown Brown Red Light blue Y ellow Light green O range Store spa re fuses in the plac e provided in the fusebox (marked in yellow in the illustration). To help in replac ing fuses, there is a special fuse-gripping tool on the right-ha nd side in the fusebox. Fuse rating 2A 5A 7.5 A 10 A 15 A 20 A 30 A 40 A Before replacing a fuse, turn off the respective switch and the ignition.
Fuse C ircuit Rating 11 12 C entral locking system Fog lights 20 A 15 A 13 I nterior mirror, 5A Anti-theft alarm sy stem, I nformation display, Telephone, Ra in sensor Windscreen wiper 30 A 14 Some circuits m ay be protected by severa l fuses.
Fuse 21 22 23 C ircuit Rating Ignition lock, 5A centra l loc king , Anti-theft alarm system , Rad io, Infotainment system Haz ard warning 15 A flashers, Information disp lay, Electronic air conditioning sy stem, Infotainment system, C ontrol indicators ABS, ES P, TC, Power steering 10 A Dipped beam (left), Headlight range adjustment Parking light (left), Tail light (left), N um ber pla te light 10 A 26 27 Main b eam (left) Rear air conditioning system, Reversing lights 10 A 10 A 28 C ourtesy li
Bulb re place ment Before replac ing a bulb, switch ignition off and switch relevant switch off. O nly hold new bulb at base! Do not touch the bulb glass with bare hands, otherwise fingerprints on the glass eva pora te. Residue builds up on the reflector, eventually resulting in a dull reflector. Inadv ertently stained bulbs may be cleaned with a clean non-fluffy cloth, using alcohol or white spirits. Replacement bulb m ust be in accordance with data on base of defective bulb.
Haloge n headlight system dipped and main beam Headlight sy stem with sep arate bulbs for dipped b eam (outer bulbs) and main beam (inner bulbs). Dipp ed beam 1. Open bonnet and engage support. 2. Hold bulb housing at plug , rotate anticlockw ise and remove. 3. Remove bulb mounting from reflector. 4. Detach bulb from bulb mounting. 5. Insert new b ulb into b ulb mounting, without touching the glass. 6. Insert new b ulb so that the two lugs on the bulb m ounting enga ge in the recesses in the reflector. 7.
Mai n bea m 1. Open bonnet and engage support. 2. Hold bulb housing at plug , rotate anticlockw ise and remove. 3. Remove bulb mounting from reflector. 4. Raise lug and detach connector from bulb mounting. 5. Insert new b ulb mounting with b ulb, without touching the glass. 6. Insert new b ulb so that the two lugs on the bulb m ounting enga ge in the recesses in the reflector. 7. Rotate bulb carrier to right as far as it will go.
5. Insert light holder in reflector, rotate clockwise and engage in position. Haloge n headlight system, parking lights 1. Open bonnet and engage support. 3. Remove bulb from socket. 4. Insert new bulb, without touc hing the glass. 2. Rotate bulb holder to left and diseng age.
5. Insert holder in reflector, rotate clockwise and enga ge in position. Haloge n headlight system, front turn signal 3. Press bulb into mounting slightly, turn anticlockwise a nd remove. 1. Open bonnet and engage support. 4. Insert new bulb, without touc hing the glass. 2. Rotate bulb holder to left and diseng age.
Xe non headlight system, dipped and main beam Headlights w ith separate system s for dipped beam 1 (outer bulbs) and ma in beam 2 (inner bulbs). Dipp ed beam The Xenon headlight dipp ed beam op erates at very hig h voltage. Do not touch the ignition system; danger to life. We recomm end that you ha ve the b ulbs cha nged by a Vauxhall Authorised Repairer. Main beam 4. Detach plug connector from bulb base. 1. O pen bonnet and engag e support. 5. Fit connector onto new bulb, without touching the glass.
X enon headlight sys tem , front turn s ignal The turn signal light is integrated into the hea dlight sy stem and is fitted with a ma intena nce-free bulb. I f a bulb should nev ertheless fail, w e recommend that you have it rep la ced by a Vauxhall Authorised Repairer. Fog lights 3 We recommend that you have bulbs changed by a Vauxhall Authorised Repairer. Side turn signal lights Xe non headlight system, parking lights 1. Open bonnet and engage support. 2.
Brake light, tail light, turn signal, re vers ing light, fog tail light 1. Open covering in side of lug gage com partment b y rotating fasteners and remove. 2. Ta ke out first-a id kit 3 and fold carpet cov ering aside. 3. Deta ch plug connector from bulb mounting . 4. Grip the bulb mounting from the outside, slacken the two knurled nuts using the wheel bolt wrenc h and unscrew by hand. 5. Deta ch bulb mounting. 6.
Number plate light Front interior light 3 1. Open lug gage compartment. Before rem oval, close the doors so that the lig ht is not live. 2. Unscrew both screws on undersid e of ta ilg ate handle. Remove light insert. 1. Remove light by hand. 3. Press bulb slightly towards spring clip and remov e. 2. Rotate bulb holder to left and disengage. 4. Insert new bulb, without touching the glass. 3. Remove bulb from socket. 5. Insert lig ht insert a nd secure using a screwdriver. 4.
Rear courtesy light / reading light 3 in vehicle s with curtain airbag system 3 We recommend that you have bulbs changed by a Vauxhall Authorised Repairer. Instrument illumination, Information display illumination 3 We recommend that you have bulbs changed by a Vauxhall Authorised Repairer. 2. Remove bulb from socket. 3. Insert new bulb, without touching the glass. 4. Mount lens and engage in position.
If you have a problem The majority of areas of concern can be quic kly resolved in this way. Should you wish to pursue the matter further, the Principal of the Vauxhall Authorised Repairer should be made aware of your concern. It is ad visab le in cases such as this to write to him to confirm your problem and the solutions that have been offered.
O pel Austria Vertriebs GmbH Groß-Enzersdorfer S tr. 59 1220 Vi enna – Austria Tel. 01-2 88 77 444 or 01-2 88 77 0 ADAM OPEL AG Bahnhofsp la tz 1 65423 Rüsselsheim – Germ any Tel. 0 61 42-77 50 00 or 0 61 42-7 70 General Motors Poland Sp. z o. o. Domaniewsk a 41 06- 672 Wa rsa w – Pola nd Tel. 0 22-606 17 00 O pel Belgium N. V. Prins Boudewijnlaa n 30 2550 Konti ch – Belgium Tel. 03-4 50 63 11 Opel Hella s S .A. 56 K ifisias Avenue & Delfon Str. Am arousion 151 25 Athens – Greece Tel.
Maintenance, Inspection system In the case of v ehicles driven infrequently with frequent cold sta rts or predomina ntly in urba n traffic a nd stop-and-go traffic, an add itional engine oil and engine oil filter change is advisable. Further information on service and the inspection system ca n be found in the S ervice Booklet, which is in the glove compa rtm ent.
Checking and topping up fluids To aid identification, the engine oil filler cap , the c oolant expansion ta nk cap, the lid of the fluid container for the wind screen wash system a nd headlight wa sh system and the handle of the oil dipstic k are coloured y ellow. Engine oil The engine oils mentioned on page 261 are particularly suitable for the engine. These hig h-quality oils are suitab le for summer and winter operation.
Eng ine oi l level and consum ption All engines c onsume oil for technica l rea sons. The engine oil consump tion ca n only be assessed after d riv ing a long distance, and may be above the specified value during the initial stage (run-in period). Frequent driving a t hig h revs causes oil consumption to increa se. For this rea son the engine oil level should be check ed every 600 m iles (1, 000 km) or before sta rting a long trip.
Top up using oil brand that was used a t last oil cha ng e. Ob serve notes and oil tab le on page 261. Ca pacities – see p age 273. The oil consumption will not stabilize until the vehicle has been driven several thousand miles. Only then can the ac tual ra te of consum ption b e estab lished . O il chang e, oi l filter cha ng e Perform change in a ccordance with serv ic e interva l ind icator. We recommend that you use g enuine Vauxhall oil filters.
Diese l fue l filter Coolant Check fuel filter for a ny w ater residue when each engine oil cha ng e tak es place. We recom mend that y ou consult a Vauxhall Authorised Repairer. During operation the system is pressurized. The temp erature ma y therefore rise briefly to ov er 100 °C.
If no antifreeze is available, fill with clean drink ing water or d istilled water. After topping up w ith tap or distilled water, ha ve the anti-freez e concentration checked, a nd anti-freeze added if necessary. H ave the cause of the coolant loss remedied. We recommend that you consult a Vauxhall Authorised Repairer. When closing, tighten coola nt filler cap as fa r as it will go.
Use of som e b ra ke fluids could cause damage or impa ir braking effectiveness. Stay well informed. We recommend that you only use Vauxhall-approved high performance brake fluid. Extreme cleanliness is im porta nt, since brake fluid contam ination can lead to brake sy stem malfunctions. After correcting the brake fluid level, have the cause of brake fluid loss remedied . We recommend that you consult a Va ux ha ll Authorised Repairer.
Sm earing w ip er b la des ca n be clea ned w ith a soft cloth and Vaux hall Windscreen Wash Solvent. Wiper b la des whose lips have become hardened, cracked or c ov ered with silicone must be replaced. This may be necessary as a result of the effects of ice, tha wing salt or heat, or the incorrect use of cleaning agents. Switch off windscreen wiper or autom atic wiper sy stem with rain sensor 3 in car washes – see pa ges 17, 257.
The windscreen wash system and headlight wash system w ill not freeze in winter: Winds creen and headlight wash systems 3 Wind screen wash system, rear w indscreen wash and headlight wash system reservoir filler neck 3 in front left of engine compartment nex t to the battery. Fill only with clean w ater to prevent the nozzles from clogging. To improve cleaning efficiency, we recommend that you add a little Vauxhall Wind screen Wash Solvent.
Pa rk ing the vehicle for more than 4 weeks can lead to battery discha rg ing. This m ay reduce the service life of the battery. Disconnect b attery from on-board power supply by d isconnecting the negative terminal. (Anti-theft alarm system is then disab led). P rotecting ele ctronic components Ensure that ignition is switched off before connecting battery .
Ve hicle decom mis sioning O bserve na tional regulations. If the vehicle is decomm issioned for several months, the follow ing work must be ca rried out in order to prevent damage. We recom mend that y ou consult a Vauxhall Authorised Repairer.
255
Vehicle care Obtain adv ice from a Vauxhall Authorised Repairer regarding cleaning materials tha t ha ve b een tested a nd recomm ended by Vauxhall. When caring for your vehicle, observe all na tional environm ental reg ulations, particula rly when wa shing it. Regular, thorough care helps to improve the appearance of your vehicle and maintain its v alue over the y ears. It is a lso a prerequisite for warranty claims for any paint or corrosion damag e.
Washing The paintwork of your v ehicle is exposed to env ironmenta l influences, e. g. continuous changes in weather conditions, ind ustrial waste gases and dust or tha wing sa lts, so wash and wax your v ehicle regularly. When using a utoma tic car washes, select a programme which includes wax ing. Bird droppings, dead insects, resin, pollen a nd the like should be cleaned off immediately , as they contain aggressive constituents which can cause paint dam age.
Paintwork damage Plastic and rubber parts Seat belts Repair small area s of p aint damage suc h as stone impacts, scratches etc. immediately using a Va ux ha ll touch-up applicator or Vauxhall sp ra y and touch-up paint before rust can form . If rust has alrea dy formed, ha ve the c ause remedied. We recommend that you consult a Vauxhall Authorised Repairer. Please also pay attention to surfaces and edg es beneath the v ehicle where rust ma y have formed unnoticed for some time.
Winds creen wipe r blade s Sm earing w ip er b la des ca n be clea ned w ith a soft cloth and Vaux hall Windscreen Wash Solvent, and replaced if necessa ry – see page 250. Locks Before they lea ve the factory, the lock s are lubricated with a high-grade lock cylinder grease. Vauxhall lock c ylind er grease prevents the locks from freezing up. Use de-icing agents only in emergencies, as they have a degreasing effect and will impair the functioning of the locks.
Technical data Vehicle docum ents, identification plate The identification plate is affixed to the front right door fram e. The tec hnical d ata is determined in accordance with European C ommunity standards. We reserve the right to make modifications. S pecifications in the vehic le docum ents alwa ys have priority ov er those given in this manual.
Coolant, brake fluid, oils When top ping up – C oolant, – Brake fluid, – Manual transmission oil we recomm end that you consult a Vauxhall Authorised Repairer, who can advise you on the correct p roducts to use. Caution: Use of unsuita ble fluids can ca use serious dam age to the vehic le. Ve hicle ide ntification data The Vehicle Identification Numb er is stamped on the identification plate and in the v ehicle floor on the rig ht-hand side under a cover between the front passeng er door and sea t.
Inform ation on AC EA oil grade cla ssific ation The Association d es Constructeurs Européens d'Autom ob iles classifies engine oils according to their perform anc e (quality). Ea ch categ ory is given letters and numbers, e.g. A3: The letter indicates the field of application: A = Petrol eng ines in passenger cars B = Diesel engines in passenger cars E = Diesel engines in trucks The number shows the quality in numerically ascending order.
Engine data Sales designation Eng ine identifier code 1.6 16V Z 16 XE 1.8 16V Z 18 XE Za fira OPC Z 20 LET 2.2 16V Z 22 SE 2.0 DTI 16V Y 20 DTH Numb er of cylinders 4 4 4 4 4 Bore dia. (mm ) 79.0 80.5 86.0 86.0 84.0 81.5 88.2 86.0 94.6 90.0 1598 1796 1998 2198 1995 Max . engine outp ut (k W) at rpm 74 6000 92 5600 147 5400 108 5800 74 4000 Torque (Nm ) at rpm 150 3600 170 3800 250 1950 203 4000 230 1500 to 2500 10.5 10.5 8.8 10.0 18.
Pe rform ance (approx. ) Eng ine 1 ) Z 16 XE Z 18 XE Z 20 LET Z 22 SE Y 20 DTH – 176; 110 – 117; 188 117; 188 112; 180 – 136; 220 – – 124; 200 117; 188 109; 175 – 107; 172 km/h) 2 ) Max imum speed (mph; 5-speed ma nual transmission Sports transmission Automatic transmission 1) 2) Sa les desig nation – see pa ge 26 3. The ma xim um s peed is a ch ieva ble with a m aximum of h alf p ayloa d. Optiona l eq uipm ent m ay reduce th e specified m aximum speed of the vehicle.
Fuel cons umption, CO2 e mis sions Directive 80/1268/EEC (last c hanged by 1999/100/EC) has ap plied for the measurement of fuel consumption since 1996. The direc tiv e is oriented to actual driving practices: Urban driving is rated at approx. 1 /3 and extra-urban driving with approx. 2 /3 (urban and extra-urban consumption). C old starts and acceleration phases are also tak en into consideration. The specification of CO 2 emission is also a constituent of the directive.
Fuel cons umption (ap prox . l/100 km), CO2 emission (approx. g /km ) Eng ine 1 ) Z 16 XE Z 18 XE Z 20 LET Z 22 SE Y 20 DTH Manual/S ports/Automatic tra nsmission Urb an Extra-urban Combined CO 2 – / 9.9/– – / 6.1/– – / 7.5/– – /180/– 10.6/11.0/11. 9 6.2/ 6. 5/ 6.8 7.8/ 8. 2/ 8.7 187/ 196/ 208 –/13.1/– –/ 7.2/– –/ 9.4/– –/ 225/– – /11.8/12.5 – / 6. 6/ 6.8 – / 8. 5/ 8.9 – / 204/ 214 8.0/–/9.5 5.3/–/6.0 6.3/–/7.3 169/– /196 1) Sa les desig nation – see pa ge 26 3.
Weights, payload and roof load The p ayload is the difference between the permitted g ross vehicle weight (see identification plate, page 260) and the EC kerbweight. To ca lc ulate the kerbweight, enter the data for your vehicle below: z Kerb weight from Ta ble 1, page 268 + ... ..... .... .. kg z Ad ditional w eight of equipment version from Ta ble 2, p age 269 + ... ..... .... .. kg z Weight of heavy accessories from Table 3, page 269 + ... ..... .... .. kg The total = ... ..... .... ..
Weights (kg): Table 1 , K erbweight 1) Model Engine Zafira 1) 2) 2) Manual transm ission Automatic transmission Z 16 XE 1393/1425 – Z 18 XE 1435 1455 Z 20 LET 1540 – Z 22 S E 1465 1485 Y 20 DTH 1503/1530 1523/1550 According to EC D irective 70/ 156/EC, includ ing a ssum ed w eig hts fo r d river (68 kg ), lug ga ge (7 kg) and all fluids (tank 90 % full). For s ales des ig na tion, see p ag e 263.
Weights (kg) : Table 2, Additional weight of e quipme nt versions Eng ine 1 ) Z 16 XE Z 18 XE Z 20 LET Z 22 SE Y 20 DTH Zafira Design 20 20 20 20 20 Zafira Elegance (with air con.) 25 25 25 25 25 Weights (kg) : Table 3, Heavy acces sories Accessories Air c onditioning Front system, sun roof Elec tronic ai r condi tioning system Rear skylight roof Headl ight cleaning system Towi ng equipm ent Weight 20 13 2.8 14 1) 17 For sales d esigna tion , s ee pa ge 263.
Tyres Winter tyres Whe els Restricti ons Not a ll tyres ava ila ble on the market currently meet the structural requirem ents. We recommend that you consult a Vauxhall Authorised Repairer concerning suitab le tyre mak es. Ty res of size 205/55 R 16 are not permitted as winter tyres (M+ S tyres) except on vehicles a pproved 1 ) for 225/45 R 17 tyres. Wheel bolt tightening torque: 110 Nm.
Continued: Tyre inflation pressures in bar / psi (ctd.) Ty re inflation pressure with up to 3 persons Tyre inflation pressure with full load Engine1 ) Ty res Front Rear Front Rear Z 16 Z 18 Z 22 Y 20 195/65 R 15, 205/55 R 16 2) 2.2/32 2.2/32 2. 8/41 3.2/46 205/55 R 16, 225/45 R 17 3) 2.2/32 2.2/32 2. 8/41 3.2/46 XE, XE, S E, DTH, Z 20 LET 1) 2) 3) For sa les d esign atio n see pa g e 2 63. Michelin H X-MXM on ly. Michelin P ilot Prim acy only.
Ele ctrical system Battery Voltage 12 Volt Am p hours 55 Ah / 66 Ah 3 / 70 Ah 3 / 72 Ah 3 Battery for radio frequenc y rem ote control 272 CR 20 32
Capacities (app rox . in litres) Eng ine 1 ) Z 16 XE Z 18 XE Z 20 LET Z 22 SE Y 20 DTH Cooling system Vehicles with ma nual transmission with air con. 6.3 6.6 6. 5 6. 8 – 7. 4 6. 8 7. 1 7. 9 7. 9 Cooling system Vehicles with automatic transmission with air con. – – 6. 4 6. 7 – – 6. 6 6. 9 7. 7 7. 7 Fuel tank (nominal content) 58 58 58 58 58 Engine oil with filter change 3.5 4. 25 4. 25 5. 0 5. 5 Engine oil betw een MIN a nd MAX on d ip stick 1.0 1. 0 1. 0 1. 0 1.
Dimensions (mm) Zafira Length 4317 Width 1742 Width with two ex terior mirrors 1999 Height 1634 Height with roof rail 1684 Wheelb ase Turning c ircle diam eter, wall to 1) 2) 2694 wall1 ) In metres. Veh icle with en gine Z 20 LET , for sa les d esign atio n see pa ge 26 3. 274 11.25 / 11.
Mounting dim ens ions of caravan / traile r towing equipment with re movable coupling ball bar All dimensions refer to fac tory -fitted towing equipm ent. Dimension mm A 25 ± 0.2 B 45 ± 0.3 C 7.5 D 63.5 E 448.5 F 404 G 63 ±0.3 H 151.3 I 50 ±0 .3 ±0 .5 The d istance from the centre of the rear wheel to the centre of the ball head is 912 mm . We recom mend hav ing tow ing equipment retro-fitted by a Vauxhall Authorised Repairer.
Index 276 A B AB S (Anti-lock Brake System ).. ..... .... ..... 198 Ac cessories. ..... .... ..... .... ..... .... ..102, 142, 216 Ac cessory sockets.... .... ..... .... .... ..... .... ..... .. 81 Air conditioning system ... .... .... ..... .... ..... 157 Air intak e.... ..... .... ..... .... ..... .... ..153, 159, 174 Air recirculation system .... .... ..153, 159, 170 Air vents . .... ..... .... ..... .... ..... .... .... ..... . 154, 160 Airba gs... .... ..... .... ..... .... ..... .... .... ..... ..
C Ca pacities ... .... ..... .... ..... .... ..... .... .... ..... .... 273 Ca r Pass... .... .... ..... .... ..... .... ..... .... .... ..... .... .... 4 Ca re .... ..... .... .... ..... .... ..... .... ..... .... .... ..... .... 256 Ca ta lytic converter .. ..... .... ..... 188, 191, 212 Central locking system . .... ..... .... .... ..... 60, 62 Centre console lighting .... ..... .... .... ..... .... 145 Changing the remote control battery ... .. 61 Changing wheels . .... ..... .... ..... .... .... .....
F G Fan.. .... ..... .... ... 152, 157, 158, 162, 172, 245 Fault warnings ..... .... ..... .... ..... .... .... ..... .... .. 48 Filling station Capacities.... ..... .... ..... .... ..... .... .... ..... .... 273 Engine oil level . .... ..... .... ..... .... .... ..... .... 246 Fuel . ..... .... .... ..... .... ..... .... ..... .... .... .186, 263 Ignition key .. ..... .... ..... .... ..... .... .... ..... .... .... 4 Opening the bonnet . .... ..... .... .... ..... .... ..70 Ty re inflation pressure.. ...
J Jac k . .... ..... .... .... ..... .... ..... .... ..... .... .... ..... .... 217 Jump leads .. .... ..... .... ..... .... ..... .... .... ..... .... 212 K Key Ignition switch .. .... ..... .... ..... .... .... ..... .... .. 59 Ignition lock . ..... .... ..... .... ..... .... .... ..... .. 9, 22 Locking d oors... .... ..... .... ..... .... .... ..... 58, 60 Remove .... .... ..... .... ..... .... ..... .... .... ..... .... .. 23 Starting .... .... ..... .... ..... .... ..... .... .... .....
R S Radio .. ..... .... .... ..... .... ..... .... ..... .... .... ..... 30, 56 Radio equipment (C B).. .... ..... .... .... ..... .... .. 57 Radio frequency remote control .. ..... .... .. 60 Rain sensor.. .... ..... .... ..... .... ..... .... .... ... 17, 257 Reading lights. ..... .... ..... .... ..... .... .... ..... .... 145 Rear light cluster.. .... ..... .... ..... .... .... ..... .... 143 Bulb replacement. ..... .... ..... .... .... ..... .... 239 Rear seat ba ckrests. ..... .... ..... .... .... ..
T Tachometer. .... ..... .... ..... .... ..... .... .... ..... .... .. 37 Tail lights . .... .... ..... .... ..... .... ..... .... .... ..... .... 143 Bulb replacement. ..... .... ..... .... .... ..... .... 239 Tailgate ... .... .... ..... .... ..... .... ..... .... .... ..... .. 5, 65 Tank Fuel gauge .. ..... .... ..... .... ..... .... .... ..... .... .. 39 Technical d ata ..... .... ..... .... ..... .... .... ..... .... 260 Tem perature regulation 152, 157, 158, 166 The first 600 miles / 1000 km .... ....
