User Guide

ManualsBrandsVAVA ManualsAccessoriesDash Cam 2K Wi-Fi Car DVR 2560x1440 30fps Clear QHD Video Dashboard Camera for iOS & Android On-site Instant Social Media Sharing Videos, Visible License Plate, G-Sensor

03/04

Dash Cam

Snapshot Button

1. Dash Cam and Snapshot Button Pairing: Once the dash cam is turned on, press and hold the Snapshot Button

for 5 seconds until you hear 4 beep sounds and they are synced. The Snapshot Button enters standby mode once

there is no operation in 1 minute. Press again to restart and take a photo.

2. Snapshot Button Operations: 1) Press once to take photos; 2) Press and hold for 3 seconds with a beep sound

to take videos.

Note:

1. After the dash cam and the Snapshot Button is successfully paired, the Snapshot Button enters standby mode

when the dash cam is shut off. When the dash cam is turned on again, press the Snapshot Button to activate the

button while taking a snapshot photo, it takes around 3 seconds to resume normal working status.

Status

Working

Stop working / micro SD card storage full

Recording an emergency video clip

Recording a 15 second video clip after the video recording

icon is tapped in the app

Micro SD card error

Snapshot photo has been taken

Connected to WiFi

Not connected to WiFi

LED Indicator

Blue LED light slowly blinks

Blue LED light on

Red LED light blinks

Red LED light fast flashes

Red LED light flashes once

White LED light on

White LED light off

2. Continually pressing the Snapshot Button will drain the button battery. Replace the button cell if you run out of battery.

Emergency Recording Mode

A 20 second video will be captured when the G-Sensor is activated in case of sharp turns or a sudden stop. When

the capacity of these videos reaches 30% of the SD card space, the oldest ones will be overwritten by the new ones.

VAVA Dash App

Connecting the VAVA Dash to Your Phone

Downloading the VAVA Dash App

Parking Mode

When your car is not running, i.e. engine being shut down, the dash cam will automatically power off in 10 seconds and

enter Parking Mode. When a shock or crash is detected, the G-Sensor will activate the dash cam and start recording a

15 second video. The dash cam will then re-enter the Parking Mode.

For Android / iOS phones, search for “VAVA Dash” in the Google Play Store or Apple App Store. Download the app and

install it on your phone.

Connect your Android / iOS smartphone with the VAVA Dash Cam through WiFi:

Settings > WLAN > Select “VAVA WiFi” > Enter password > Open the VAVA Dash App

Note: The initial WiFi password is 12345678.

Once your phone is connected to the VAVA Dash Cam, open the app to view a real-time video feed and configure the

dash cam.

Live Preview