Max User Guide Vax Air3 Motion Max Series vax.com.
Contents 1 Contents 1 Machine Overview 2 General Safety Information 3 Getting Started 4 How To Use 5 Looking After Your Machine — Filters 6 Looking After Your Machine — Removing Blockages 7 FAQs 8 Other Information 9
Machine Overview 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Handle Handle height adjuster Handle release button Dirt bin release button Carry handle Power on/off button Brushbar on/off button Inner cyclones Dirt container Post-motor filter cover Brushbar blockage indicator Brushbar access clips Rotating brushbar Quick release cord wrap Cord Wheels Brushbar reset button Stretch hose Telescopic extension tube 2-in-1 crevice tool and dusting brush Upholstery tool Pre-motor filter Pos
General Safety Information This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. Please keep instructions for further use. When using the vacuum cleaner basic safety precautions should always be observed, including the following: 1. Only use the vacuum cleaner indoors on dry surfaces. 2. Turn off the on/off switch on the vacuum cleaner controls before disconnecting or connecting from the mains supply. 3.
Getting Started PLEASE READ SAFETY INFORMATION BEFORE USE (p3) Before plugging the cord into the electrical outlet, make sure the switch is in the ‘off’ position. Hold the vacuum cleaner firmly when starting and in use. Assembling your upright 2 1 1. Remove all packaging 2. Insert the handle 3. Adjust handle up/down to the desired height Attach the 2-in-1 and upholstery tool to their on board storage area. Attach the hose end to the floorhead ensuring it clicks into place.
How to Use Using accessories NOTE: The 2-in-1 tool, TurboTool and other tools can be attached to the telescopic tube or directly to the hose. NOTE: Switch off the brushbar before using any accessories/hose/telescopic extension tube. Hose Remove hose. Choose an accessory. Attach accessory to hose. Telescopic extension tube Remove telescopic extension tube. Attach hose to telescopic extension tube. Attach accessory to telescopic extension tube.
Looking After Your Machine - Filters WARNING: Always switch off and unplug the vacuum cleaner from the electrical socket before assembling, opening or emptying the dirt container, or before connecting/disconnecting the attachments. IMPORTANT: Filters need to be cleaned every time you empty the dirt bin for best cleaning results. Do not use your vacuum cleaner without all of the filters in place. IMPORTANT: The motor is equipped with a thermal cut-out.
Looking After Your Machine Removing Blockages IMPORTANT: If the air inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and remove the blockage(s) before re-starting the vacuum cleaner. Re-setting the brushbar To reset press the RED button in the middle of the floorhead. A RED flashing light will indicate a jammed brushbar. A GREEN flashing light indicates no blockages in the brushbar.
FAQs Warning: To reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance/troubleshooting checks. Is there an accessory missing? • Check the ‘Getting Started’ page in this guide or the box that the machine came in to make sure that the part is definitely included in your unit. • If it is missing, we’re here to help.
Other Information Service & Help Any queries or concerns about using your Vax, simply visit; vax.com.au or call the Vax Careline. Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling. Vax Careline: AU: 1300 361 505 NZ: 0800 800 900 Monday-Friday 8.30am to 5.
Notes vax.com.
Distributed by Techtronic Industries Pty. Ltd. Level 1, 660 Doncaster Road, Doncaster, Australia 3108. www.vax.com.au Service Line: AU: 1300 361 505 / NZ: 0800 800 900 vax.com.