V-064TB D1 10/25/05 4:14 PM Page 1 Vax Careline: 0870 6061248 www.vax.co.uk BAGLESS CYLINDER VACUUM CLEANER Vax Model Number: V-064TB Instruction Manual Please read carefully before using your cleaner. Always fully extend the mains cable before use.
V-064TB D1 10/25/05 4:14 PM Page 2 Parts Overview 1. Diagram 3 2 4 5 1 6 14 15 16 17 13 7 8 12 11 10 9 Fig.
V-064TB D1 10/25/05 4:14 PM Page 3 Parts Overview 1. Diagram (continued) 20 4 21 6 18 19 Fig.1/1 Fig.1/2 24 23 22 Fig.1/4 25 26 Fig.1/3 18 19 20 21 22 Dusting brush Upholstery brush Dust container release button Dust container handle Pre-motor filter Fig.
V-064TB D1 10/25/05 4:14 PM Page 4 Safety Information/Use & Function 2. Safety Information FOR HOUSEHOLD USE ONLY When using the vacuum cleaner, basic safety precautions should always be observed, including the following: 1. Only use the vacuum cleaner indoors on dry surfaces. 2. Turn off the vacuum cleaner controls before connecting to or disconnecting from the mains supply. 3. Always unplug the vacuum cleaner before connecting or disconnecting the vacuum hose.
V-064TB D1 10/25/05 4:14 PM Page 5 Use & Function/Filters Carpets & Hard Floors 1. Hard floors (tiles, parquet, etc): the brushes on the combination floor tool must be lowered, by pressing the top of the rocker switch (Fig.2). 2. Carpets or rugs: the brushes on the combination floor tool must be raised, by pressing the bottom of the rocker switch (Fig.3). Fig.2 Fig.3 Variable Power To adjust the suction, turn the variable power dial to control the suction power. 1.
V-064TB D1 10/25/05 4:14 PM Page 6 Filters/Accessories Changing & Cleaning the Post-Motor (Exhaust) Filter 1. Lift the post-motor filter cover 26 and remove. 2. Remove the post-motor filter 25 clean by shaking the dust off or replace with a new filter. PLEASE NOTE: The post motor filter should be replaced every 9-12 months. Replacing the filters IMPORTANT: All filters should be checked regularly for any signs of damage, preferably every time after the vacuum cleaner has been used.
V-064TB D1 10/25/05 4:14 PM Page 7 Spare Parts/Troubleshooting/Tech Specification 6. Spare Parts Filter kit A (pre-motor filter, post-motor filter) Vax part number 1-1-125641-00 Filter kit B (central filter, pre-motor filter, post-motor filter) Vax part number 1-1-125642-00 To purchase Vax consumables, visit www.vax.co.uk 7. Troubleshooting PROBLEM: Vacuum cleaner won't run Cause: Power cord not firmly pushed into mains socket. Solution: Plug cord in firmly to power outlet.
V-064TB D1 10/25/05 4:14 PM Page 8 EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the product V-064TB is manufactured in compliance with the following: Safety: 73/23/EEC Low Voltage Directive, as modified by 93/68/EEC EMC: 89/336/EEC Electromagnetic Compatibility Directive, as modified by 93/68/EEC Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.