Instruction manual

6. Spare Parts
Filter kit A (pre-motor filter, post-motor filter) Vax part number 1-1-125641-00
Filter kit B (central filter, pre-motor filter, post-motor filter) Vax part number 1-1-125642-00
To purchase Vax consumables, visit www.vax.co.uk
7
Spare Parts/Troubleshooting/Tech Specification
7. Troubleshooting
PROBLEM: Vacuum cleaner won't run
Cause: Power cord not firmly pushed into mains socket.
Solution: Plug cord in firmly to power outlet.
Cause: Blown fuse or tripped circuit breaker.
Solution: Check fuse/breaker. Replace fuse or reset breaker.
PROBLEM: Vacuum cleaner won’t pick up/loss of suction
Cause: Dust container not installed properly.
Solution: Re-install dust container.
Cause: Dust container full.
Solution: Empty the dust container.
Cause: Nozzle/dirt passage clogged.
Solution: Remove obstruction.
Cause: Filters are clogged.
Solution: Clean or replace filters.
Cause: Accessories not attached correctly.
Solution: Check the accessories are firmly connected.
Cause: Combination floor tool in wrong position.
Solution: Check the rocker is in the correct position for carpets or hard floors.
PROBLEM: Dust escaping from vacuum cleaner
Cause: Dust container not installed properly.
Solution: Re-install dust container.
Cause: Dust container full.
Solution: Empty the dust container.
8. Technical Specification
Power supply: 220-240V/50Hz
Motor power: 2000W
Dust container: Bagless
Dust container volume: 2.7 litres
Filter system: Central filter (washable)
Post-motor (exhaust) filter
Pre-motor filter
Cord length: 6 metres
Weight: 8.6kg
Subject to technical change without notice.
V-064TB D1 10/25/05 4:14 PM Page 7