Parts List

3
• Don’t carry the carpet washer whilst it's switched on.
• Don’t attempt to remove blockages with sharp objects as this may cause
damage to your carpet washer.
• Don’t use the carpet washer with incorrect voltage as this may result in
damage or injury to the user. The correct voltage is listed on the ratings label.
Do's
• Always vacuum your carpets thoroughly before using the carpet washer.
• Check with the manufacturer of your ooring prior to using the carpet washer.
Test all carpets and rugs for colourfastness and pile distortion before full
usage. Run the carpet washer over a small hidden area. If no damage or pile
distortion occurs continue cleaning.
• Always turn o or unplug the carpet washer from the mains before carrying
out any maintenance.
• Turn o all controls on the carpet washer before disconnecting or connecting
the power cord. After use always wrap the power cord around the cord clips
provided.
• Always keep the power cord away from the brushes whilst using the carpet
washer.
• Always protect the power cable from heated surfaces and open ames.
• Use only CE approved 13amp extension cords, non-approved extension cords
may overheat. Care should be taken to arrange the extension cord as it can be
a trip hazard.
• Always use the carpet washer with all water/solution tanks and lters in place.
• Keep all openings clear and free from debris as this may aect the airow/
suction.
• Always use the carpet washer in an upright position. To prevent motor
damage from dirty water, never hold the carpet washer upside down or on its
side.
• Store the carpet washer in a cool, dry area. Before storing the carpet washer
ensure all water/solutions tanks and lters are thoroughly clean and dry.
PLEASE KEEP INSTRUCTIONS FOR FURTHER USE AND USE ONLY
AS INSTRUCTED IN THIS GUIDE.