Parts List

9
Maintaining the carpet washer
WARNING: Always switch o the carpet washer and unplug from the charger and mains before carrying out any
maintenance or troubleshooting.
Depress the dirty water
tank release latch and lift
to remove the dirty water
tank from the carpet
washer.
Hold the dirty water tank
over a sink and pull to
open the quick pour spout.
To re-t, tilt the dirty water
tank and line the back of
the tank up onto the carpet
washer. Drop the front of
the tank forward until the
dirty water tank release clip
clicks into place.
Empty the dirty water over
the sink. Rinse the dirty
water tank under water
(max 40°C) to remove
dirt/debris.
IMPORTANT: Empty and rinse out clean and dirty water tanks and leave to air dry before replacing. Do not leave solution
stored in the tanks between uses.
Emptying and cleaning the dirty water tank
Cleaning the lter
Depress the dirty water
tank release latch and lift
to remove the dirty water
tank from the carpet
washer.
Wipe the lter located on
the machine underneath
the dirty water tank to
clear any dirt/debris.
To re-t, tilt the dirty water
tank and line the back of
the tank up onto the carpet
washer. Drop the front of
the tank forward until the
dirty water tank release clip
clicks into place.
Taking care of your machine