Spray & Vac Window Cleaner Range Let’s get started H86-WV Series vax.co.
Let’s talk safety Basic safety precautions This Spray & Vac is intended for household use only and NOT for commercial or industrial use. have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Thank you for buying this Spray & Vac Taking care of your windows The Spray & Vac Window Cleaner is designed to clean windows regularly as effectively and efficiently as possible and this user guide will help you get the most out of your machine. Clean windows look better and make your home brighter. Taking care of your Spray & Vac Also inside this guide are instructions on maintaining your new machine, so that it’s always ready when you are to tackle your windows.
Contents Let’s talk safety Getting to know your machine Getting started Spray & Vac Included with your machine Charger Microfibre pad Using your machine Scrub pad Taking care of your machine Notes What to do if it goes wrong Getting in touch Funnel
Getting to know your machine Suction head Removable squeegee Lower squeegee Suction head release button Power On/Off button Fastening strip Solution spray outlet Spray trigger Handle Power charger indicator light Power charger connector Solution tank Dirty water tank Exhaust vent Tank release buttons Dirty water release cap Technical Specification Accessories & Consumables Name Spray & Vac Voltage 3.7V Weight 0.
Getting started PLEASE READ ‘Let’s talk SAFETY’ AT THE BEGINNING BEFORE USE Assembling your window vacuum Choose microfibre/scrub pad and push onto the fastening strip Insert the suction head into the machine and push until it clicks into place TIP Note: The microfibre pad is for general cleaning and the scrub pad for cleaning stubborn marks To remove the suction head, press the suction head release button and gently pull
Using your machine Using your window vacuum 120ml 80ml 40ml Insert the charger cable into the power charger connector. Plug the charger into the mains. Power charger indicator light will flash during charging, when fully charged the indicator light will show solid red.
Taking care of your machine Note: The Spray & Vac must be emptied after each use – DON’T store water/solution in the machine between usage After every use Squeeze the tank release buttons to remove the tank from the Spray & Vac Lift the emptying cap to let the dirty water out of the tank Wipe the squeegee with a damp cloth to remove any excess water Cleaning the removable squeegee To remove the squeegee, pull and slide through the suction head Wash the squeegee under running water (Max 40’C) to remov
Notes
What to do if it goes wrong Problem Why won’t the window vacuum turn on? Why won’t the window vacuum pick up? Why does my window vacuum leak? Why does my window vacuum leave a smear on my window? Why won’t the battery recharge? Solution • The battery may not be charged. Connect the charger, the indicator light will flash red when charging and show a solid red light when fully charged. The initial charge should be for 2 hours. • The unit might be plugged in.
Getting in touch * Calls are charged at the UK local rate. Please make a note of the serial number and model number of the window vacuum before calling.
@VaxUK Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK email: info@vax.co.uk website: vax.co.uk Version 1.0 EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the H86-WV series is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive. Waste electrical products should not be disposed of with household waste.
