Floormate Deluxe Let’s get started HF86-FM-D vax.co.
Let’s talk safety Basic safety precautions Please keep instructions for further use.
Thank you for buying this Floormate Deluxe Taking care of your hard floors The Floormate Deluxe is designed to make washing hard floors regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your hard floors will ensure they keep their appearance for longer and smell fresh and clean. You’ve chosen hard floors for your home for a reason and Vax will help you take good care of them.
Contents Let’s talk safety Floormate Deluxe Included with your machine Getting to know your machine Getting started 250ml Floor to Floor Solution Using your machine Taking care of your machine Spinscrub Wood Floor Brush What to do if it goes wrong Getting in touch Spinscrub Tile and Grout Brush Notes
Getting to know your machine D-Shaped folding handle (hidden) Clean BoostTM Trigger Solution trigger (hidden) Cord clip Folding handle release button Mode selector Cord storage hook (rotates) Carry handle ON/OFF switch Dirty water tank release button Clean water/solution tank release button Dirty water tank Clean water/ solution tank Cord storage hook Nozzle release clips Handle release pedal Nozzle Technical Specification Name Floormate Deluxe Voltage 220-240V~50Hz Wattage 400W Cord length 6
Getting started PLEASE READ ‘Let’s talk SAFETY’ AT THE BEGINNING BEFORE USE Assembling your Floormate Raise handle to upright position until it locks into place To lower handle, press handle release button and fold handle to storage position Carefully remove the brush assembly cover To install brushes rest the machine on the floor.
Using your machine Filling the clean water tank WARNING To remove the clean water tank, squeeze the release button and pull the tank straight out Using the tank cap as a measuring cup, pour the required amount of solution (approx. 60ml per 1 litre of water) Twist tank cap anticlockwise and lift to remove Pour cleaning solution into tank. Top up tank to fill line with warm water (Max 40�C) Always switch the machine off and unplug before carrying out any maintenance.
Using your machine Note: The recovery tank has an automatic shut off to prevent the tank from overflowing. If this is activated, the machine will not pick up and the sound of the motor will change. The recovery tank will need to be emptied. Emptying the recovery tank To remove recovery tank, press down on release button and pull Pour dirty water into sink Remove recovery tank lid to empty Clean dirt and debris from foam filter.
Using your machine Using your machine Push switch to turn machine on, push switch again to turn machine off The mode selector allows you to choose DRY mode or WET Mode.
Taking care of your machine Nozzle can be removed for easy cleaning. Pull the nozzle release latch upwards Remove nozzle by pulling straight out and rinse under running water Push both brush release buttons and remove the brush assembly cover. Brushes can be rinsed under water to remove debris (Max 40°C) Carefully remove the brush assembly cover Remove any debris from squeegee by wiping with a damp cloth (Max 40�C) To replace brushes, align the post with square hole on the bottom of the machine.
What to do if it goes wrong Problem Why won’t my Floormate switch on? Why won’t my Floormate pick up? Solution • Check the fuse in the plug. Always replace the fuse in the plug with a British 13amp fuse • The recovery tank has an automatic shut off to prevent the tank from overflowing. If this is activated, the machine will not pick up and the sound of the motor will change.
Getting in touch * Calls are charged at the UK local rate. Please make a note of the serial number and model number of the hard floor cleaner before calling.
Notes
Notes
Notes
@VaxUK Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK email: info@vax.co.uk website: vax.co.uk Version 1.0 EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the HF86-FM-D series is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive. Waste electrical products should not be disposed of with household waste.