User`s guide

VAX-ll/730 SBB System
• VAX-ll/730 CPU Cluster with 1 Mb of Memory
• Disk Controller (UDA50)
•
Dual TU58 Tape Drive
• Console Terminal
• One of the following Disk Drive Configurations
RA60 for Drive 1 and either RA60, RA80 or RA81 for Drive 0
RA60, RA80,
RA81 for Drive 0
•
TU58 #34, VAX 11725/730 CONSOLE Tape Cartridge
• TU58 #36, VAX 11725/730 MICRODIAG Tape Cartridge
• One of the following Diagnostic Distribution Medias
RA60 # 1, VAX 725/730 CMPLT DIAG Disk Cartridge for the
System with an RA60 Disk Drive in Drive 0 or 1
MT #1, VAX 725/730 COMPLT DIAG for the System with a
Tape Drive
7.3 AUTO MODE
NOTE
For the VAX-ll/730 SBB system which has the
TU80 as the removable media drive device (no
RA60), the CRDs must be copied from the magnetic
tape distribution media
(MT #1) to the system main-
tenance
area ([SYSO.SYSMAINT]) on the system
disk. Refer to Chapter 8 for this procedure.
CRD AUTO mode performs the following tests in the order shown:
V AX-ll/730 Systems 1 and 2
1. Tests the CPU, memory and FPA with microdiagnostics.
2. Tests the RB730 (internal disk controller) with microdiagnostics.
3. Tests the CPU with level 4 diagnostics.
4. Boots the diagnostic supervisor from the RL02.
5. Tests the DMF32 and the RB730 disk drives with macrodiagnostics.
7-2