User`s guide

PA[TT]*# - Read data from the IDC ECC pattern register.
Example:
MIC)EX
PA - Examines the contents of the IDC Pattern Register (read only).
DB[UF]# - Read/write data from/to the IDC's data buffer.
Examples:
MIC)EX
DB - Examines the longword (four bytes) of the current data buffer (A or B) at the
current data buffer address. The address
is then incremented by four.
MIC)DE
DB 18FFCCA 1 - The value 18FFCCA 1 is deposited in the current data buffer at the
current address. The address
is then incremented by four.
UP[C] - Read/write 15 bits of data from/to the UPC register.
Examples:
MIC)EX
UP - Examine the microprogram counter.
MIC)DE
UP 01F7C - Deposit the value 01F7C in the microprogram counter.
WC[S] or /C - Read/write data from/to WCS (without parity calculation).
Examples:
MIC)EX
WC OEOO - Examine writable Control Store (WCS) or EX/C OEOO through location
OEOO.
MIC)DE WC 0800 16574F - Deposit the value 16574F in WCS location 0800.
LS
- Read/write data from/to local store locations.
Examples:
MIC)EX
LS 200 - Examines the data at local store location 200.
MIC)DE LS 3100 3FF - Deposits the value 3FF in local store location 3100.
as - Read/write eight bits of data from/to the CPU as register.
Example:
MIC)EX
as - Examine the eight bits of data in the CPU as register.
UB[S]# - Read/write data from/to the UNIBUS map portion of the translation buffer.
Examples:
MIC)EX
UB 200 - Read the location 200 from the UNIBUS translation buffer.
MIC)DE
UB 3FF IF900 - Writes data IF900 into location 3FF of the UNIBUS translation
buffer.
B-7