Vax V-008S 6th.qxd 4/6/05 11:29 AM Page 1 Vax Careline: 0870 6061248 www.vax.co.uk BAGLESS UPRIGHT VACUUM CLEANER Vax Model Number: V-008 BAGLESS UPRIGHT VACUUM CLEANER Vax Model Number: V-008SP Instruction Manual Please read carefully before using this cleaner. Always fully extend the mains cable before use.
Vax V-008S 6th.qxd 4/6/05 11:29 AM Page 2 Parts Overview Safety Information 1. Diagram 2. Safety Information FOR HOUSEHOLD USE ONLY. 1 FRONT BACK 2 16 17 28 3 18 19 4 15 5 20 27 6 21 7 14 8 22 13 23 9 12 26 10 11 25 24 24 14. Do not vacuum up hard or sharp objects such as glass, nails, screws, coins, etc. When using the vacuum cleaner, basic safety 15. Do not use without the filters in place. precautions should always be observed, including the 16.
Vax V-008S 6th.qxd 4/6/05 11:29 AM Page 4 How to Assemble How to Operate 3. How to Assemble IMPORTANT: Always remove the power plug from the electrical outlet before assembling or before removing accessories. 4. Clip TurboTool™ on to the front of the TurboTool™ caddy (Fig.3/4). Tool required: Phillips screwdriver. 1. 4. How to Operate On/off Pedal Cord Release Turn the quick release for easy cord removal (Fig.4/1). Clip cord into cord guide to keep out of the way while vacuuming.
Vax V-008S 6th.qxd 4/6/05 11:29 AM Page 6 How to Operate/Accessories To Operate Self-Propelled Feature (V-008SP only) 1. For everyday use, engage the self-propelled feature by turning the switch up to “ON” position (Fig.4/6A). Grasp hand grip and push vacuum cleaner (Fig.4/6B). Accessories/Dirt Container & Filter: Removal & Replacement 5. Accessories 6. Dirt Container & Filter: Removal & Replacement 1. The vacuum cleaner must be in the upright position to raise the brushbar (Fig.4/9).
Vax V-008S 6th.qxd 4/6/05 11:29 AM Page 8 Dirt Container & Filter: Removal & Replacement/Rotating Brushbar: Removal & Replacement 5. Empty the dirt container completely (Fig.6/4). Rotating Brushbar: Removal & Replacement/Lightbulb: Removal & Replacement 3. Lift and remove the brushbar. Dispose of the old belt (Fig.7/3). Fig.7/7 Fig.6/7 Fig.6/4 6. Each time the dirt container is emptied, the filter should be cleaned.
Vax V-008S 6th.qxd 4/6/05 11:29 AM Page 10 Lightbulb: Removal & Replacement/Clearing Blockages 3. Secure the headlight lens by replacing the two (2) screws (Fig.8/3). Troubleshooting Clearing Blockages from the TurboTool™ 10. Troubleshooting 1. Rotate the locking ring 180º and turn the TurboTool™ over (Fig.9/3). PROBLEM: Cleaner won’t run WARNING: TO REDUCE RISK OF PERSONAL INJURY, UNPLUG VACUUM CLEANER BEFORE SERVICING Cause: Not properly plugged into wall outlet. Solution: Plug in firmly.
Vax V-008S 6th.qxd 4/6/05 11:29 AM Page 12 Troubleshooting/UK Service & Help/Technical Specification PROBLEM: Air flow restricted with attachment use Cause: Attachment use restricts air flow. Solution: Check attachment. Cause: New carpet debris clogging air path. Solution: Remove obstruction. 10. UK Service & Help Vax Care 0870 6061248 Monday-Friday 9.00am to 5.00pm. An answerphone is available out of these hours. Any queries or concerns about using the Vax, call the Vax Careline.
Vax V-008S 6th.qxd 4/6/05 11:29 AM Page 14 This page has been intentionally left blank. 14 This page has been intentionally left blank.
Vax V-008S 6th.qxd 4/6/05 11:29 AM Page 16 EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the products V-008 Performance and V-008SP Performance Self-Propelled are manufactured in compliance with the following: Safety: 73/23/EEC Low Voltage Directive, as modified by 93/68/EEC EMC: 89/336/EEC Electromagnetic Compatibility Directive, as modified by 93/68/EEC Waste electrical products should not be disposed of with household waste.
